merge: frame resize handle (bottom-right corner)

Mirrors picasso's device-resize pattern. 10x10 handle at frame's
bottom-right; pointerdown→drag→PATCH width+height on release. Min
200x150. Doesn't interfere with frame-body drag or label-as-grip
selection.

.dockerignore

@@ -15,7 +15,7 @@ data
 
 # Build artefacts
 bin
-mcables
+/cablegui
 
 # Editor cruft
 .vscode

.gitignore

@@ -8,7 +8,7 @@ data/*.db-shm
 
 # Build artefacts
 bin/
-mcables
+/cablegui
 
 # Editor
 .vscode/

CLAUDE.md

@@ -1,37 +1,60 @@
-# mCables — Project Instructions
+# CableGUI — Project Instructions
 
 ## Project Overview
 
-Cable-management **framework** for m's setup. Each cable-managed environment
-(LOFT, OFFICE, …) is a separate **mCables project**, and each project is
-backed by exactly one Excalidraw drawing. The framework provides a visual
-web interface backed by a Go HTTP API and SQLite, plus an export pipeline
-that writes `.excalidraw` files via mExDraw.
+Cable-management **framework + solver** for m's setup. m declares his
+**devices** and the **connection requirements** between them ("NAS must
+connect to Switch via RJ45"). CableGUI runs a solver that emits the cable
+plan + bundle recommendations. CableGUI is a **schematic**, not a
+physical-routing tool — cables are straight lines between endpoints; the
+"maximum bundling" objective is satisfied by the endpoint-pair rule
+(when two or more cables share the same A↔B endpoint pair, group them
+into one bundle). The visual editor is still there for tweaking the
+plan, but the solver is the headline.
 
-**Memory group_id:** `mcables`
+Each cable-managed environment (LOFT, OFFICE, …) is a separate
+**CableGUI project**, and each project is backed by exactly one Excalidraw
+drawing. The framework provides a visual web interface backed by a Go
+HTTP API and SQLite, plus an export pipeline that writes `.excalidraw`
+files via mExDraw.
+
+**Memory group_id:** `mcables` (kept historical — all prior memories live
+under this id; renaming would orphan them)
 
 **No CLI.** Frontend-first — every interaction is through the visual
 interface. The backend serves the UI and the API; there is no
-`mcables` shell binary intended for humans.
+`cablegui` shell binary intended for humans.
 
 ## Goal
 
 - A reusable framework for tracking devices, ports, cables, cable types,
   bundles, frames — **scoped per project** (LOFT and OFFICE are separate
   projects, each a separate drawing).
-- A visual editor in the browser: switch projects, add frames/devices/ports,
-  click ports to wire up cables, pick cable types from a per-project legend.
-- A one-way export from the DB to the corresponding `.excalidraw` drawing
-  on `mxdrw.msbls.de` whenever m clicks Export — DB is authoritative,
-  Excalidraw is the projection.
-- Bundle detection: parallel cables along the same path within a project
-  get grouped + colour-bundled in the diagram.
+- A **solver** that, given the project's devices + connection
+  requirements, emits the cable plan + bundle recommendations.
+  Objective: maximum bundling via the endpoint-pair rule (schematic
+  only — no path/trunk/cable-tray modelling).
+- A **hybrid device-type catalog**: 14 built-in types (NAS, PC, Mac,
+  Notebook, TV, Soundbar, Switch, fritz, ChromeCast, SteamLink,
+  IOx-3/6/8, Screen, Keyboard, Mouse) with default port profiles,
+  extensible per project. Picking a type on device-create seeds the
+  device's ports automatically; m overrides per instance.
+- **Setup templates** for bootstrapping a project from blank to
+  solver-ready: built-ins 'Living Room', 'Home Office', 'Server Rack'
+  stamp their device-types + connection requirements in one transaction.
+- A visual editor for switching projects, adding frames/devices,
+  declaring requirements, running the solver, and tweaking the
+  resulting plan. Unmet requirements get a one-click quick-fix
+  ("+ Add <type> port to <device> and re-solve").
+- A one-way export from the DB to the corresponding `.excalidraw`
+  drawing on `mxdrw.msbls.de` whenever m clicks Export — DB is
+  authoritative, Excalidraw is the projection.
 
 ## Architecture
 
 | Layer | Tech | Notes |
 |---|---|---|
-| DB | SQLite | `./data/mcables.db` (project-local, gitignored). Driver: `modernc.org/sqlite` (cgo-free). |
+| DB | SQLite | `./data/cablegui.db` (project-local, gitignored). Driver: `modernc.org/sqlite` (cgo-free). |
 | Backend | Go | `net/http` HTTP API + static frontend via `embed.FS`. Standard library + minimal deps. Single binary. |
 | Frontend | Vanilla JS modules + SVG, no build step | TypeScript types via JSDoc, optional `tsc --noEmit` in CI. Preact-via-CDN-ESM is the documented fallback if vanilla state gets painful — no build step either way. |
 | Diagram I/O | mExDraw HTTP API | `PUT https://mxdrw.msbls.de/api/drawings/<name>.excalidraw` with `Authorization: Bearer $MEXDRAW_TOKEN`. (The `mcp__mexdraw__*` MCP tools are not currently configured for this project — workers use the raw HTTP API.) |
@@ -45,16 +68,31 @@ interface. The backend serves the UI and the API; there is no
 - **Frames** sub-divide a project (LOFT has `desk`, `rack`, `media`;
   OFFICE has `desk`, `server`). Frames are not projects — they're zones
   within one drawing.
-- Every device, port, cable, IO marker, and bundle is **project-scoped**
-  (`project_id` denormalised onto every row, with `ON DELETE CASCADE` from
-  `projects`). `UNIQUE (project_id, devices.name)` — no two devices in
-  one project share a name.
+- Every device, port, cable, IO marker, bundle, and **connection
+  requirement** is **project-scoped** (`project_id` denormalised onto
+  every row, with `ON DELETE CASCADE` from `projects`).
+  `UNIQUE (project_id, devices.name)` — no two devices in one project
+  share a name.
 - **Cable types are global.** A single shared `cable_types` table —
   no `project_id`. The five defaults (Power/USB/HDMI/DP/RJ45) are seeded
   by migration 001 once, not per project. Renaming or recolouring a type
   affects every project's legend immediately.
+- **Device types are hybrid.** `device_types` is one global table with
+  `project_id` NULL for the 11 built-in catalog rows (seeded by
+  migration 002) and `project_id = current` for project-custom types.
+  Each `device_type` carries a `device_type_ports` profile that seeds
+  `ports` rows when a device of that type is created. m can extend the
+  catalog per project; built-ins are read-only from the API.
+- **Connection requirements** (`connection_requirements` table) are the
+  solver's input. m declares "from_device ↔ to_device, preferred cable
+  type, must_connect"; the solver assigns ports and emits cables.
 - **Project deletion guardrail.** `DELETE /api/projects/:pid` requires
   `?confirm=<name>` matching the project's current name. 400 otherwise.
+- **Solver-owned vs. user-owned cables.** `cables.auto = 1` = created by
+  the solver and replaceable on re-solve. `auto = 0` = hand-drawn by m,
+  left alone by the solver. PATCHing endpoint or type of an auto cable
+  promotes it to manual (explicit "Promote to manual" button in the
+  inspector, per design v4 §5b.3).
 
 ## Branch Strategy
 
@@ -75,14 +113,14 @@ interface. The backend serves the UI and the API; there is no
 
 ## Deployment — mDock, raw docker (NOT Dokploy)
 
-mCables runs on **mDock** (`192.168.178.131` on the LAN, Tailscale `mdock`)
+CableGUI runs on **mDock** (`192.168.178.131` on the LAN, Tailscale `mdock`)
 as a **plain docker-compose service**. Dokploy is for public mlake/mRiver
 stuff; mDock uses raw `docker compose` per the conventions of the existing
 mDock services (mgreen, mgeo, msports-garmin, paperless, …).
 
-- Repo layout on mDock: `/home/m/stacks/mcables/` with `docker-compose.yml`,
-  `data/` bind-mount, secrets in `/home/m/secrets/mcables/.env`.
-- Image: `mgit.msbls.de/m/mcables:latest` (built and pushed by a Gitea
+- Repo layout on mDock: `/home/m/stacks/cablegui/` with `docker-compose.yml`,
+  `data/` bind-mount, secrets in `/home/m/secrets/cablegui/.env`.
+- Image: `mgit.msbls.de/m/cablegui:latest` (built and pushed by a Gitea
   Actions workflow on push to `main`, runs on the self-hosted runner on
   mDock with label `self-hosted:host`).
 - Port mapping: `7777:7777`, exposed on the LAN — no reverse proxy.
@@ -90,12 +128,12 @@ mDock services (mgreen, mgeo, msports-garmin, paperless, …).
 - LAN URL: `http://mdock:7777`.
 - No auth — LAN-trusted.
 
-Local dev (no Docker): `go run ./cmd/mcables` against `./data/mcables.db`.
+Local dev (no Docker): `go run ./cmd/cablegui` against `./data/cablegui.db`.
 
 ## Seed drawing — visual grammar reference, **not** a runtime importer
 
 `mxdrw.msbls.de/draw/Cable-Management.excalidraw` is **reference material
-only**. mCables does **not** auto-ingest it. m will rebuild LOFT and OFFICE
+only**. CableGUI does **not** auto-ingest it. m will rebuild LOFT and OFFICE
 from scratch inside the tool — the seed exists so the **exporter** mimics
 its visual grammar:
 
@@ -126,23 +164,25 @@ Legend colours (global, seeded once by migration 001):
 
 ## Out of scope (v0)
 
-- Multi-user. mCables is m-only.
+- Multi-user. CableGUI is m-only.
 - Auth / sharing — LAN-trusted on mDock.
 - Mobile / responsive — desktop browser only.
 - Cable inventory beyond visual structure (no length, no purchase history,
   no SKU). Strictly visual structure for v0.
 - Import from `.excalidraw` at runtime. If a one-shot migration is ever
-  needed, a separate `mcables-migrate` CLI tool is the right shape, not a
+  needed, a separate `cablegui-migrate` CLI tool is the right shape, not a
   hot API endpoint.
 
 ## Worker Preferences
 
-- **First shift = inventor** (design pass): conventions, schema, API,
-  export pipeline, mDock deploy plan, UI flows, slices. Output:
-  `docs/design.md` + open questions for m.
-- **Second shift = coder** (after m's go on the design): bootstrap repo
-  skeleton (Go module, SQLite migrations, server, exporter, frontend
-  scaffold). Take slices 1–4 first (project CRUD, frames/devices, ports
-  and cables, IO + cable-type editing); slice 5 (Excalidraw export) closes
-  the round-trip.
-- Use **Sonnet** for both — greenfield, structure matters more than depth.
+- **Inventor shifts** (design passes): conventions, schema, API, export
+  pipeline, mDock deploy plan, UI flows, slices. Output: `docs/design.md`
+  + open questions for m. v1–v4 are versioned in the doc's header callout.
+- **Coder shifts** (after m's go on a design version): build to the
+  current design.md. Current state: slice 1 (project CRUD + global
+  cable_types) and slice 2 (frames + devices + drag) are merged; design
+  v4 reshapes slices 3+ (IO + cable-type editing → device-type catalog →
+  device-type manage → connection-requirements UI → solver → manual
+  port/cable draw → export). See `docs/design.md` §8 for the current
+  sequence.
+- Use **Sonnet** for both — structure matters more than depth.

Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:1.7
 #
-# mCables — single-stage build → distroless runtime image.
+# CableGUI — single-stage build → distroless runtime image.
 # go.mod requires go 1.25; modernc.org/sqlite is pure Go so CGO_ENABLED=0
 # and a distroless/static runtime is all we need.
 
@@ -17,20 +17,20 @@ COPY . .
 RUN CGO_ENABLED=0 GOOS=linux go build \
         -trimpath \
         -ldflags="-s -w" \
-        -o /out/mcables \
-        ./cmd/mcables
+        -o /out/cablegui \
+        ./cmd/cablegui
 
 FROM gcr.io/distroless/static-debian12:nonroot
 WORKDIR /app
-COPY --from=build /out/mcables /app/mcables
+COPY --from=build /out/cablegui /app/cablegui
 
-ENV MCABLES_ADDR=0.0.0.0:7777 \
-    MCABLES_DB=/app/data/mcables.db
+ENV CABLEGUI_ADDR=0.0.0.0:7777 \
+    CABLEGUI_DB=/app/data/cablegui.db
 
 EXPOSE 7777
 # Run as UID:GID 1000:1000 to match m on mDock — the bind-mounted
-# /home/m/stacks/mcables/data is owned by m:m, so the container can write
+# /home/m/stacks/cablegui/data is owned by m:m, so the container can write
 # to it without chowning the host dir. distroless/static-debian12 accepts
 # arbitrary numeric UIDs; the Go binary doesn't need a /etc/passwd entry.
 USER 1000:1000
-ENTRYPOINT ["/app/mcables"]
+ENTRYPOINT ["/app/cablegui"]

Makefile

@@ -1,14 +1,14 @@
 .PHONY: build run test typecheck fmt clean
 
-BIN := bin/mcables
+BIN := bin/cablegui
 PKG := ./...
 
 build:
 	@mkdir -p bin
-	go build -trimpath -ldflags="-s -w" -o $(BIN) ./cmd/mcables
+	go build -trimpath -ldflags="-s -w" -o $(BIN) ./cmd/cablegui
 
 run:
-	go run ./cmd/mcables
+	go run ./cmd/cablegui
 
 test:
 	go test -race $(PKG)

README.md

@@ -1,9 +1,9 @@
-# mCables
+# CableGUI
 
 Cable-management **framework** for m's setup — visual web editor backed by
 a single Go binary + SQLite, generating Excalidraw drawings via mExDraw.
 
-Each cable-managed environment (LOFT, OFFICE, …) is a separate mCables
+Each cable-managed environment (LOFT, OFFICE, …) is a separate CableGUI
 *project*; each project is backed by exactly one `.excalidraw` drawing on
 mxdrw.msbls.de.
 
@@ -23,7 +23,7 @@ end-to-end; the SVG canvas is intentionally empty until slice 2.
 ## Run it
 
 ```sh
-go run ./cmd/mcables
+go run ./cmd/cablegui
 # open http://localhost:7777
 ```
 
@@ -31,20 +31,21 @@ Or built:
 
 ```sh
 make build
-./bin/mcables
+./bin/cablegui
 ```
 
 The binary serves the frontend from an embedded `web/static/` and the
-JSON API under `/api/`. SQLite lives at `./data/mcables.db` by default.
+JSON API under `/api/`. SQLite lives at `./data/cablegui.db` by default.
 
 ### Environment
 
 | Var | Default | Notes |
 |---|---|---|
-| `MCABLES_ADDR` | `0.0.0.0:7777` | Listen address. |
-| `MCABLES_DB` | `./data/mcables.db` | SQLite path. Parent dir is created on boot. |
-| `MEXDRAW_BASE_URL` | (unset) | Used by slice 5 export — not consumed yet. |
-| `MEXDRAW_TOKEN` | (unset) | Bearer for the mExDraw export. Not consumed yet. |
+| `CABLEGUI_ADDR` | `0.0.0.0:7777` | Listen address. |
+| `CABLEGUI_DB` | `./data/cablegui.db` | SQLite path. Parent dir is created on boot. |
+| `MEXDRAW_BASE_URL` | `https://mxdrw.msbls.de` | Base URL for mExDraw export. |
+| `MEXDRAW_USER` | (unset) | Username for the mxdrw HTTP Basic Auth on export. Required. |
+| `MEXDRAW_PASS` | (unset) | Password for the mxdrw HTTP Basic Auth on export. Required. |
 
 ### Tests
 
@@ -77,37 +78,35 @@ DELETE /api/cable-types/:id               ← 409 in_use if any cable references
 
 ## Deploy to mDock
 
-mCables runs on **mDock** at `http://mdock:7777` as a docker-compose
-service under `/home/m/stacks/mcables/`. Pattern matches the other
+CableGUI runs on **mDock** at `http://mdock:7777` as a docker-compose
+service under `/home/m/stacks/cablegui/`. Pattern matches the other
 mDock services (mgreen-journal, mgeo, msports-garmin, …) — no Dokploy,
 no reverse proxy, LAN-trusted.
 
-### Manual deploy (first roll)
+### Manual deploy
 
-1. **Build + push the image** (from any host with docker; today the
-   image lives in mAi's Gitea namespace because mAi doesn't have write
-   access to `m/`):
+1. **Build + push the image** (image now lives under `m/` in Gitea):
 
    ```sh
-   docker build -t mgit.msbls.de/mai/mcables:latest .
-   awk '/machine mgit.msbls.de/{getline; getline; print $2}' ~/.netrc-mai \
-     | docker login mgit.msbls.de -u mAi --password-stdin
-   docker push mgit.msbls.de/mai/mcables:latest
+   docker build -t mgit.msbls.de/m/cablegui:latest .
+   awk '/machine mgit.msbls.de/{getline; getline; print $2}' ~/.netrc \
+     | docker login mgit.msbls.de -u m --password-stdin
+   docker push mgit.msbls.de/m/cablegui:latest
    ```
 
 2. **Prepare directories on mDock** (one-time):
 
    ```sh
-   ssh mdock 'mkdir -p /home/m/stacks/mcables/data /home/m/secrets/mcables \
-              && touch /home/m/secrets/mcables/.env \
-              && chmod 0600 /home/m/secrets/mcables/.env'
-   scp docker-compose.yml mdock:/home/m/stacks/mcables/docker-compose.yml
+   ssh mdock 'mkdir -p /home/m/stacks/cablegui/data /home/m/secrets/cablegui \
+              && touch /home/m/secrets/cablegui/.env \
+              && chmod 0600 /home/m/secrets/cablegui/.env'
+   scp docker-compose.yml mdock:/home/m/stacks/cablegui/docker-compose.yml
    ```
 
 3. **Pull + start**:
 
    ```sh
-   ssh mdock 'cd /home/m/stacks/mcables && docker compose pull && docker compose up -d'
+   ssh mdock 'cd /home/m/stacks/cablegui && docker compose pull && docker compose up -d'
    ```
 
 4. **Verify** from any LAN host:
@@ -118,11 +117,11 @@ no reverse proxy, LAN-trusted.
    ```
 
 To **update** to a new build: rebuild + push the image, then
-`ssh mdock 'cd /home/m/stacks/mcables && docker compose pull && docker compose up -d'`.
+`ssh mdock 'cd /home/m/stacks/cablegui && docker compose pull && docker compose up -d'`.
 
 ### Persistence
 
-SQLite lives at `/home/m/stacks/mcables/data/mcables.db` on the host
+SQLite lives at `/home/m/stacks/cablegui/data/cablegui.db` on the host
 (bind-mounted into the container at `/app/data`). Container runs as
 UID 1000:1000 to align with `m:m` ownership on mDock — DB files end
 up owned by `m`, the host user.

cmd/cablegui/main.go

@@ -0,0 +1,64 @@
+package main
+
+import (
+	"context"
+	"errors"
+	"log"
+	"net/http"
+	"os"
+	"os/signal"
+	"path/filepath"
+	"syscall"
+	"time"
+
+	"mgit.msbls.de/m/cablegui/internal/db"
+	"mgit.msbls.de/m/cablegui/internal/server"
+	"mgit.msbls.de/m/cablegui/web"
+)
+
+func main() {
+	addr := envOr("CABLEGUI_ADDR", "0.0.0.0:7777")
+	dbPath := envOr("CABLEGUI_DB", "./data/cablegui.db")
+
+	if err := os.MkdirAll(filepath.Dir(dbPath), 0o755); err != nil {
+		log.Fatalf("mkdir data dir: %v", err)
+	}
+
+	store, err := db.Open(dbPath)
+	if err != nil {
+		log.Fatalf("open db: %v", err)
+	}
+	defer store.Close()
+
+	if err := db.Migrate(store.DB()); err != nil {
+		log.Fatalf("migrate: %v", err)
+	}
+
+	srv := &http.Server{
+		Addr:              addr,
+		Handler:           server.New(store, web.Static()),
+		ReadHeaderTimeout: 5 * time.Second,
+	}
+
+	go func() {
+		log.Printf("cablegui listening on %s (db=%s)", addr, dbPath)
+		if err := srv.ListenAndServe(); err != nil && !errors.Is(err, http.ErrServerClosed) {
+			log.Fatalf("listen: %v", err)
+		}
+	}()
+
+	stop := make(chan os.Signal, 1)
+	signal.Notify(stop, os.Interrupt, syscall.SIGTERM)
+	<-stop
+	log.Printf("shutting down")
+	ctx, cancel := context.WithTimeout(context.Background(), 5*time.Second)
+	defer cancel()
+	_ = srv.Shutdown(ctx)
+}
+
+func envOr(key, fallback string) string {
+	if v := os.Getenv(key); v != "" {
+		return v
+	}
+	return fallback
+}

docker-compose.yml

@@ -1,20 +1,20 @@
-# mCables — production compose for mDock.
-# Lives at /home/m/stacks/mcables/docker-compose.yml on mDock.
+# CableGUI — production compose for mDock.
+# Lives at /home/m/stacks/cablegui/docker-compose.yml on mDock.
 # Matches the existing mDock service patterns (mgreen, mgeo, …).
 
 services:
-  mcables:
-    image: mgit.msbls.de/m/mcables:latest
-    container_name: mcables
+  cablegui:
+    image: mgit.msbls.de/m/cablegui:latest
+    container_name: cablegui
     restart: unless-stopped
     ports:
       - "7777:7777"
     environment:
       - TZ=Europe/Berlin
-      - MCABLES_ADDR=0.0.0.0:7777
-      - MCABLES_DB=/app/data/mcables.db
+      - CABLEGUI_ADDR=0.0.0.0:7777
+      - CABLEGUI_DB=/app/data/cablegui.db
     env_file:
-      # Empty for slice 1. MEXDRAW_TOKEN lands here when slice 5 ships.
-      - /home/m/secrets/mcables/.env
+      # MEXDRAW_USER + MEXDRAW_PASS for the mxdrw HTTP Basic Auth on export.
+      - /home/m/secrets/cablegui/.env
     volumes:
-      - /home/m/stacks/mcables/data:/app/data
+      - /home/m/stacks/cablegui/data:/app/data

go.mod

@@ -1,4 +1,4 @@
-module mgit.msbls.de/m/mcables
+module mgit.msbls.de/m/cablegui
 
 go 1.25.5
 

internal/db/bundles.go

@@ -0,0 +1,222 @@
+package db
+
+import (
+	"database/sql"
+	"errors"
+	"fmt"
+	"strings"
+)
+
+// BundleCreate is the create-shape: a name + the cable IDs to include.
+// Auto=true means the solver created the bundle; user-created bundles
+// stay auto=0 and survive a re-solve.
+type BundleCreate struct {
+	Name     string
+	CableIDs []int64
+	Auto     bool
+}
+
+type BundleUpdate struct {
+	Name     *string
+	CableIDs *[]int64
+}
+
+// CreateBundle inserts a bundle + its cable_bundle rows in one tx.
+func (s *Store) CreateBundle(projectID int64, b BundleCreate) (*Bundle, error) {
+	return s.createBundle(s.db, projectID, b, true)
+}
+
+func (s *Store) createBundle(ex execer, projectID int64, b BundleCreate, ownTx bool) (*Bundle, error) {
+	name := strings.TrimSpace(b.Name)
+	if name == "" {
+		return nil, fmt.Errorf("%w: name is required", ErrInvalidInput)
+	}
+	// When the caller already holds a tx (ownTx=false), do all validation
+	// against `ex` (the tx executor) — calling Store methods that hit
+	// s.db would deadlock against the connection the tx is holding under
+	// MaxOpenConns(1).
+	for _, cid := range b.CableIDs {
+		if _, err := s.getCableTx(ex, projectID, cid); err != nil {
+			if errors.Is(err, ErrNotFound) {
+				return nil, fmt.Errorf("%w: cable_id %d not in project", ErrInvalidInput, cid)
+			}
+			return nil, err
+		}
+	}
+	autoInt := 0
+	if b.Auto {
+		autoInt = 1
+	}
+
+	var tx *sql.Tx
+	var err error
+	useEx := ex
+	if ownTx {
+		tx, err = s.db.Begin()
+		if err != nil {
+			return nil, err
+		}
+		defer tx.Rollback()
+		useEx = tx
+	}
+	res, err := useEx.Exec(
+		`INSERT INTO bundles (project_id, name, auto) VALUES (?, ?, ?)`,
+		projectID, name, autoInt,
+	)
+	if err != nil {
+		return nil, mapWriteErr(err)
+	}
+	id, _ := res.LastInsertId()
+	for _, cid := range b.CableIDs {
+		if _, err := useEx.Exec(
+			`INSERT INTO bundle_cables (bundle_id, cable_id) VALUES (?, ?)`, id, cid,
+		); err != nil {
+			return nil, mapWriteErr(err)
+		}
+	}
+	if ownTx {
+		if err := tx.Commit(); err != nil {
+			return nil, err
+		}
+		return s.GetBundle(projectID, id)
+	}
+	// In tx-inheriting mode, build the response struct locally — the
+	// caller will re-fetch via GetBundle after commit if it needs more.
+	out := &Bundle{
+		ID: id, ProjectID: projectID, Name: name, Auto: b.Auto, CableIDs: append([]int64(nil), b.CableIDs...),
+	}
+	return out, nil
+}
+
+func (s *Store) GetBundle(projectID, id int64) (*Bundle, error) {
+	var b Bundle
+	var autoInt int
+	err := s.db.QueryRow(
+		`SELECT id, project_id, name, auto, created_at, updated_at
+		 FROM bundles WHERE id = ? AND project_id = ?`, id, projectID,
+	).Scan(&b.ID, &b.ProjectID, &b.Name, &autoInt, &b.CreatedAt, &b.UpdatedAt)
+	if errors.Is(err, sql.ErrNoRows) {
+		return nil, ErrNotFound
+	}
+	if err != nil {
+		return nil, err
+	}
+	b.Auto = autoInt != 0
+	ids, err := s.bundleCableIDs(id)
+	if err != nil {
+		return nil, err
+	}
+	b.CableIDs = ids
+	return &b, nil
+}
+
+func (s *Store) bundleCableIDs(bundleID int64) ([]int64, error) {
+	rows, err := s.db.Query(
+		`SELECT cable_id FROM bundle_cables WHERE bundle_id = ? ORDER BY cable_id`, bundleID,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []int64{}
+	for rows.Next() {
+		var v int64
+		if err := rows.Scan(&v); err != nil {
+			return nil, err
+		}
+		out = append(out, v)
+	}
+	return out, rows.Err()
+}
+
+// ListBundles returns every bundle in a project, ordered by id.
+func (s *Store) ListBundles(projectID int64) ([]Bundle, error) {
+	rows, err := s.db.Query(
+		`SELECT id, project_id, name, auto, created_at, updated_at
+		 FROM bundles WHERE project_id = ? ORDER BY id`, projectID,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []Bundle{}
+	for rows.Next() {
+		var b Bundle
+		var autoInt int
+		if err := rows.Scan(&b.ID, &b.ProjectID, &b.Name, &autoInt,
+			&b.CreatedAt, &b.UpdatedAt); err != nil {
+			return nil, err
+		}
+		b.Auto = autoInt != 0
+		out = append(out, b)
+	}
+	if err := rows.Err(); err != nil {
+		return nil, err
+	}
+	for i := range out {
+		ids, err := s.bundleCableIDs(out[i].ID)
+		if err != nil {
+			return nil, err
+		}
+		out[i].CableIDs = ids
+	}
+	return out, nil
+}
+
+// UpdateBundle: name + cable set are mutable. Replacing cables wipes
+// bundle_cables and re-inserts in one tx.
+func (s *Store) UpdateBundle(projectID, id int64, u BundleUpdate) (*Bundle, error) {
+	cur, err := s.GetBundle(projectID, id)
+	if err != nil {
+		return nil, err
+	}
+	if u.Name != nil {
+		v := strings.TrimSpace(*u.Name)
+		if v == "" {
+			return nil, fmt.Errorf("%w: name cannot be empty", ErrInvalidInput)
+		}
+		cur.Name = v
+	}
+	tx, err := s.db.Begin()
+	if err != nil {
+		return nil, err
+	}
+	defer tx.Rollback()
+	if _, err := tx.Exec(
+		`UPDATE bundles SET name = ?, updated_at = datetime('now') WHERE id = ?`,
+		cur.Name, id,
+	); err != nil {
+		return nil, mapWriteErr(err)
+	}
+	if u.CableIDs != nil {
+		if _, err := tx.Exec(`DELETE FROM bundle_cables WHERE bundle_id = ?`, id); err != nil {
+			return nil, err
+		}
+		for _, cid := range *u.CableIDs {
+			if _, err := s.getCableTx(tx, projectID, cid); err != nil {
+				return nil, fmt.Errorf("%w: cable_id %d not in project", ErrInvalidInput, cid)
+			}
+			if _, err := tx.Exec(
+				`INSERT INTO bundle_cables (bundle_id, cable_id) VALUES (?, ?)`, id, cid,
+			); err != nil {
+				return nil, mapWriteErr(err)
+			}
+		}
+	}
+	if err := tx.Commit(); err != nil {
+		return nil, err
+	}
+	return s.GetBundle(projectID, id)
+}
+
+func (s *Store) DeleteBundle(projectID, id int64) error {
+	if _, err := s.GetBundle(projectID, id); err != nil {
+		return err
+	}
+	if _, err := s.db.Exec(
+		`DELETE FROM bundles WHERE id = ? AND project_id = ?`, id, projectID,
+	); err != nil {
+		return err
+	}
+	return nil
+}

internal/db/cables.go

@@ -0,0 +1,371 @@
+package db
+
+import (
+	"database/sql"
+	"errors"
+	"fmt"
+	"strings"
+)
+
+// CableEndpoint identifies one side of a cable. Exactly one of PortID /
+// DeviceID / IOID must be non-nil; the store enforces this.
+type CableEndpoint struct {
+	PortID   *int64
+	DeviceID *int64
+	IOID     *int64
+}
+
+// CableCreate is the create-shape for /api/projects/:pid/cables.
+// auto=false (default) marks the cable as m-drawn; the solver writes
+// auto=true when it places its rows.
+type CableCreate struct {
+	TypeID int64
+	Label  string
+	From   CableEndpoint
+	To     CableEndpoint
+	Auto   bool
+}
+
+// CableUpdate is a partial update. PATCHing endpoint or type on an
+// auto=1 cable should promote it to manual; handler logic does that
+// (see slice 6 §5b.3).
+type CableUpdate struct {
+	TypeID *int64
+	Label  *string
+	From   *CableEndpoint
+	To     *CableEndpoint
+	Auto   *bool
+}
+
+// CreateCable inserts a cable. Validates that the endpoints exist in
+// the same project, that exactly one of (port/device/io) is set per side,
+// and that the cable type is real.
+func (s *Store) CreateCable(projectID int64, c CableCreate) (*Cable, error) {
+	return s.createCable(s.db, projectID, c)
+}
+
+// createCable on a TX-or-DB executor; solver uses the tx form.
+func (s *Store) createCable(ex execer, projectID int64, c CableCreate) (*Cable, error) {
+	if err := s.validateEndpointEx(ex, projectID, "from", c.From); err != nil {
+		return nil, err
+	}
+	if err := s.validateEndpointEx(ex, projectID, "to", c.To); err != nil {
+		return nil, err
+	}
+	if err := s.assertCableTypeEx(ex, c.TypeID); err != nil {
+		return nil, err
+	}
+	autoInt := 0
+	if c.Auto {
+		autoInt = 1
+	}
+	res, err := ex.Exec(
+		`INSERT INTO cables
+		   (project_id, type_id, label,
+		    from_port_id, from_device_id, from_io_id,
+		    to_port_id, to_device_id, to_io_id,
+		    auto)
+		 VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?)`,
+		projectID, c.TypeID, nullableString(c.Label),
+		nullableInt64(c.From.PortID), nullableInt64(c.From.DeviceID), nullableInt64(c.From.IOID),
+		nullableInt64(c.To.PortID), nullableInt64(c.To.DeviceID), nullableInt64(c.To.IOID),
+		autoInt,
+	)
+	if err != nil {
+		return nil, mapWriteErr(err)
+	}
+	id, _ := res.LastInsertId()
+	return s.getCableTx(ex, projectID, id)
+}
+
+// validateEndpoint is the s.db variant for public CRUD callers.
+func (s *Store) validateEndpoint(projectID int64, label string, e CableEndpoint) error {
+	return s.validateEndpointEx(s.db, projectID, label, e)
+}
+
+// validateEndpointEx runs the same checks against any executor so the
+// solver can call createCable inside its tx without deadlocking on the
+// MaxOpenConns(1) connection that the tx holds.
+func (s *Store) validateEndpointEx(ex execer, projectID int64, label string, e CableEndpoint) error {
+	count := 0
+	if e.PortID != nil {
+		count++
+	}
+	if e.DeviceID != nil {
+		count++
+	}
+	if e.IOID != nil {
+		count++
+	}
+	if count != 1 {
+		return fmt.Errorf("%w: %s must specify exactly one of port/device/io", ErrInvalidInput, label)
+	}
+	if e.PortID != nil {
+		var pid int64
+		err := ex.QueryRow(`SELECT project_id FROM ports WHERE id = ?`, *e.PortID).Scan(&pid)
+		if errors.Is(err, sql.ErrNoRows) {
+			return fmt.Errorf("%w: %s port_id %d not found", ErrInvalidInput, label, *e.PortID)
+		}
+		if err != nil {
+			return err
+		}
+		if pid != projectID {
+			return fmt.Errorf("%w: %s port_id %d is in another project", ErrInvalidInput, label, *e.PortID)
+		}
+	}
+	if e.DeviceID != nil {
+		var pid int64
+		err := ex.QueryRow(`SELECT project_id FROM devices WHERE id = ?`, *e.DeviceID).Scan(&pid)
+		if errors.Is(err, sql.ErrNoRows) || (err == nil && pid != projectID) {
+			return fmt.Errorf("%w: %s device_id %d not in project", ErrInvalidInput, label, *e.DeviceID)
+		}
+		if err != nil {
+			return err
+		}
+	}
+	if e.IOID != nil {
+		var pid int64
+		err := ex.QueryRow(`SELECT project_id FROM io_markers WHERE id = ?`, *e.IOID).Scan(&pid)
+		if errors.Is(err, sql.ErrNoRows) || (err == nil && pid != projectID) {
+			return fmt.Errorf("%w: %s io_id %d not in project", ErrInvalidInput, label, *e.IOID)
+		}
+		if err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+// assertCableTypeEx is a lightweight existence check against any executor.
+func (s *Store) assertCableTypeEx(ex execer, id int64) error {
+	var dummy int64
+	err := ex.QueryRow(`SELECT id FROM cable_types WHERE id = ?`, id).Scan(&dummy)
+	if errors.Is(err, sql.ErrNoRows) {
+		return fmt.Errorf("%w: cable type %d not found", ErrInvalidInput, id)
+	}
+	return err
+}
+
+func (s *Store) GetCable(projectID, id int64) (*Cable, error) {
+	return s.getCableTx(s.db, projectID, id)
+}
+
+func (s *Store) getCableTx(ex execer, projectID, id int64) (*Cable, error) {
+	var c Cable
+	var fp, fd, fio, tp, td, tio sql.NullInt64
+	var label, ex2 sql.NullString
+	var autoInt int
+	err := ex.QueryRow(
+		`SELECT id, project_id, type_id, label,
+		        from_port_id, from_device_id, from_io_id,
+		        to_port_id, to_device_id, to_io_id,
+		        auto, excalidraw_id, created_at, updated_at
+		 FROM cables WHERE id = ? AND project_id = ?`, id, projectID,
+	).Scan(&c.ID, &c.ProjectID, &c.TypeID, &label,
+		&fp, &fd, &fio, &tp, &td, &tio,
+		&autoInt, &ex2, &c.CreatedAt, &c.UpdatedAt)
+	if errors.Is(err, sql.ErrNoRows) {
+		return nil, ErrNotFound
+	}
+	if err != nil {
+		return nil, err
+	}
+	if label.Valid {
+		v := label.String
+		c.Label = &v
+	}
+	if fp.Valid {
+		v := fp.Int64
+		c.FromPortID = &v
+	}
+	if fd.Valid {
+		v := fd.Int64
+		c.FromDeviceID = &v
+	}
+	if fio.Valid {
+		v := fio.Int64
+		c.FromIOID = &v
+	}
+	if tp.Valid {
+		v := tp.Int64
+		c.ToPortID = &v
+	}
+	if td.Valid {
+		v := td.Int64
+		c.ToDeviceID = &v
+	}
+	if tio.Valid {
+		v := tio.Int64
+		c.ToIOID = &v
+	}
+	c.Auto = autoInt != 0
+	if ex2.Valid {
+		c.ExcalidrawID = &ex2.String
+	}
+	return &c, nil
+}
+
+// ListCables returns every cable in a project.
+func (s *Store) ListCables(projectID int64) ([]Cable, error) {
+	return s.listCablesTx(s.db, projectID)
+}
+
+func (s *Store) listCablesTx(ex execer, projectID int64) ([]Cable, error) {
+	rows, err := ex.Query(
+		`SELECT id, project_id, type_id, label,
+		        from_port_id, from_device_id, from_io_id,
+		        to_port_id, to_device_id, to_io_id,
+		        auto, excalidraw_id, created_at, updated_at
+		 FROM cables WHERE project_id = ? ORDER BY id`, projectID,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []Cable{}
+	for rows.Next() {
+		var c Cable
+		var fp, fd, fio, tp, td, tio sql.NullInt64
+		var label, ex2 sql.NullString
+		var autoInt int
+		if err := rows.Scan(&c.ID, &c.ProjectID, &c.TypeID, &label,
+			&fp, &fd, &fio, &tp, &td, &tio,
+			&autoInt, &ex2, &c.CreatedAt, &c.UpdatedAt); err != nil {
+			return nil, err
+		}
+		if label.Valid {
+			v := label.String
+			c.Label = &v
+		}
+		if fp.Valid {
+			v := fp.Int64
+			c.FromPortID = &v
+		}
+		if fd.Valid {
+			v := fd.Int64
+			c.FromDeviceID = &v
+		}
+		if fio.Valid {
+			v := fio.Int64
+			c.FromIOID = &v
+		}
+		if tp.Valid {
+			v := tp.Int64
+			c.ToPortID = &v
+		}
+		if td.Valid {
+			v := td.Int64
+			c.ToDeviceID = &v
+		}
+		if tio.Valid {
+			v := tio.Int64
+			c.ToIOID = &v
+		}
+		c.Auto = autoInt != 0
+		if ex2.Valid {
+			c.ExcalidrawID = &ex2.String
+		}
+		out = append(out, c)
+	}
+	return out, rows.Err()
+}
+
+// UpdateCable applies a partial update. Caller-controlled — promote-to-
+// manual semantics live at the handler level (§5b.3: any PATCH touching
+// type/endpoint promotes auto→0).
+func (s *Store) UpdateCable(projectID, id int64, u CableUpdate) (*Cable, error) {
+	cur, err := s.GetCable(projectID, id)
+	if err != nil {
+		return nil, err
+	}
+	if u.TypeID != nil {
+		if _, err := s.GetCableType(*u.TypeID); err != nil {
+			if errors.Is(err, ErrNotFound) {
+				return nil, fmt.Errorf("%w: cable type %d not found", ErrInvalidInput, *u.TypeID)
+			}
+			return nil, err
+		}
+		cur.TypeID = *u.TypeID
+	}
+	if u.Label != nil {
+		v := strings.TrimSpace(*u.Label)
+		if v == "" {
+			cur.Label = nil
+		} else {
+			cur.Label = &v
+		}
+	}
+	if u.From != nil {
+		if err := s.validateEndpoint(projectID, "from", *u.From); err != nil {
+			return nil, err
+		}
+		cur.FromPortID = u.From.PortID
+		cur.FromDeviceID = u.From.DeviceID
+		cur.FromIOID = u.From.IOID
+	}
+	if u.To != nil {
+		if err := s.validateEndpoint(projectID, "to", *u.To); err != nil {
+			return nil, err
+		}
+		cur.ToPortID = u.To.PortID
+		cur.ToDeviceID = u.To.DeviceID
+		cur.ToIOID = u.To.IOID
+	}
+	if u.Auto != nil {
+		cur.Auto = *u.Auto
+	}
+	autoInt := 0
+	if cur.Auto {
+		autoInt = 1
+	}
+	if _, err := s.db.Exec(
+		`UPDATE cables
+		 SET type_id = ?, label = ?,
+		     from_port_id = ?, from_device_id = ?, from_io_id = ?,
+		     to_port_id = ?, to_device_id = ?, to_io_id = ?,
+		     auto = ?, updated_at = datetime('now')
+		 WHERE id = ? AND project_id = ?`,
+		cur.TypeID, nullableStringPtr(cur.Label),
+		nullableInt64(cur.FromPortID), nullableInt64(cur.FromDeviceID), nullableInt64(cur.FromIOID),
+		nullableInt64(cur.ToPortID), nullableInt64(cur.ToDeviceID), nullableInt64(cur.ToIOID),
+		autoInt, id, projectID,
+	); err != nil {
+		return nil, mapWriteErr(err)
+	}
+	return s.GetCable(projectID, id)
+}
+
+// DeleteCable removes a cable from a project.
+func (s *Store) DeleteCable(projectID, id int64) error {
+	if _, err := s.GetCable(projectID, id); err != nil {
+		return err
+	}
+	if _, err := s.db.Exec(
+		`DELETE FROM cables WHERE id = ? AND project_id = ?`, id, projectID,
+	); err != nil {
+		return err
+	}
+	return nil
+}
+
+// nullableString → for label-style strings: "" → SQL NULL.
+func nullableString(s string) any {
+	if s == "" {
+		return nil
+	}
+	return s
+}
+func nullableStringPtr(p *string) any {
+	if p == nil {
+		return nil
+	}
+	return *p
+}
+
+// execer abstracts *sql.DB and *sql.Tx for store helpers used by both
+// the public API and inside transactions (e.g. the solver).
+type execer interface {
+	Exec(query string, args ...any) (sql.Result, error)
+	Query(query string, args ...any) (*sql.Rows, error)
+	QueryRow(query string, args ...any) *sql.Row
+}

internal/db/clamps.go

@@ -0,0 +1,351 @@
+package db
+
+import (
+	"database/sql"
+	"errors"
+	"fmt"
+	"strings"
+)
+
+// ClampCreate is the create-shape for a new clamp.
+type ClampCreate struct {
+	X       float64
+	Y       float64
+	Label   string
+	FrameID *int64
+}
+
+// ClampUpdate is the partial-update shape.
+type ClampUpdate struct {
+	X       *float64
+	Y       *float64
+	Label   *string
+	// FrameID tri-state: nil = leave alone; non-nil pointer to nil ptr
+	// would be ambiguous, so we use FrameRef like devices.
+	FrameID FrameRef
+}
+
+// CreateClamp inserts a new clamp inside a project.
+func (s *Store) CreateClamp(projectID int64, c ClampCreate) (*Clamp, error) {
+	if _, err := s.GetProject(projectID); err != nil {
+		return nil, err
+	}
+	if c.FrameID != nil {
+		if _, err := s.GetFrame(projectID, *c.FrameID); err != nil {
+			return nil, fmt.Errorf("%w: frame_id: %v", ErrInvalidInput, err)
+		}
+	}
+	res, err := s.db.Exec(
+		`INSERT INTO clamps (project_id, x, y, label, frame_id)
+		 VALUES (?, ?, ?, ?, ?)`,
+		projectID, c.X, c.Y, strings.TrimSpace(c.Label), nullableInt64(c.FrameID),
+	)
+	if err != nil {
+		return nil, mapWriteErr(err)
+	}
+	id, _ := res.LastInsertId()
+	return s.GetClamp(projectID, id)
+}
+
+// GetClamp returns a single clamp scoped to the project.
+func (s *Store) GetClamp(projectID, id int64) (*Clamp, error) {
+	var c Clamp
+	var frame sql.NullInt64
+	var ex sql.NullString
+	err := s.db.QueryRow(
+		`SELECT id, project_id, x, y, label, frame_id, excalidraw_id, created_at, updated_at
+		 FROM clamps WHERE id = ? AND project_id = ?`, id, projectID,
+	).Scan(&c.ID, &c.ProjectID, &c.X, &c.Y, &c.Label, &frame, &ex, &c.CreatedAt, &c.UpdatedAt)
+	if errors.Is(err, sql.ErrNoRows) {
+		return nil, ErrNotFound
+	}
+	if err != nil {
+		return nil, err
+	}
+	if frame.Valid {
+		v := frame.Int64
+		c.FrameID = &v
+	}
+	if ex.Valid {
+		c.ExcalidrawID = &ex.String
+	}
+	return &c, nil
+}
+
+// ListClamps returns every clamp in a project, ordered by id.
+func (s *Store) ListClamps(projectID int64) ([]Clamp, error) {
+	rows, err := s.db.Query(
+		`SELECT id, project_id, x, y, label, frame_id, excalidraw_id, created_at, updated_at
+		 FROM clamps WHERE project_id = ? ORDER BY id`, projectID,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []Clamp{}
+	for rows.Next() {
+		var c Clamp
+		var frame sql.NullInt64
+		var ex sql.NullString
+		if err := rows.Scan(&c.ID, &c.ProjectID, &c.X, &c.Y, &c.Label, &frame, &ex, &c.CreatedAt, &c.UpdatedAt); err != nil {
+			return nil, err
+		}
+		if frame.Valid {
+			v := frame.Int64
+			c.FrameID = &v
+		}
+		if ex.Valid {
+			c.ExcalidrawID = &ex.String
+		}
+		out = append(out, c)
+	}
+	return out, rows.Err()
+}
+
+// UpdateClamp applies a partial update.
+func (s *Store) UpdateClamp(projectID, id int64, u ClampUpdate) (*Clamp, error) {
+	cur, err := s.GetClamp(projectID, id)
+	if err != nil {
+		return nil, err
+	}
+	if u.X != nil {
+		cur.X = *u.X
+	}
+	if u.Y != nil {
+		cur.Y = *u.Y
+	}
+	if u.Label != nil {
+		cur.Label = strings.TrimSpace(*u.Label)
+	}
+	if u.FrameID.Set {
+		if u.FrameID.ID == nil {
+			cur.FrameID = nil
+		} else {
+			if _, err := s.GetFrame(projectID, *u.FrameID.ID); err != nil {
+				return nil, fmt.Errorf("%w: frame_id: %v", ErrInvalidInput, err)
+			}
+			id := *u.FrameID.ID
+			cur.FrameID = &id
+		}
+	}
+	if _, err := s.db.Exec(
+		`UPDATE clamps SET x = ?, y = ?, label = ?, frame_id = ?, updated_at = datetime('now')
+		 WHERE id = ? AND project_id = ?`,
+		cur.X, cur.Y, cur.Label, nullableInt64(cur.FrameID), id, projectID,
+	); err != nil {
+		return nil, mapWriteErr(err)
+	}
+	return s.GetClamp(projectID, id)
+}
+
+// DeleteClamp removes a clamp. cable_clamps rows cascade.
+func (s *Store) DeleteClamp(projectID, id int64) error {
+	res, err := s.db.Exec(`DELETE FROM clamps WHERE id = ? AND project_id = ?`, id, projectID)
+	if err != nil {
+		return mapWriteErr(err)
+	}
+	n, _ := res.RowsAffected()
+	if n == 0 {
+		return ErrNotFound
+	}
+	return nil
+}
+
+// ListCableClamps returns every (cable_id, clamp_id, ord) row in a
+// project, joined through cables to scope by project_id.
+func (s *Store) ListCableClamps(projectID int64) ([]CableClamp, error) {
+	rows, err := s.db.Query(
+		`SELECT cc.cable_id, cc.clamp_id, cc.ord
+		 FROM cable_clamps cc
+		 JOIN cables c ON c.id = cc.cable_id
+		 WHERE c.project_id = ?
+		 ORDER BY cc.cable_id, cc.ord`, projectID,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []CableClamp{}
+	for rows.Next() {
+		var cc CableClamp
+		if err := rows.Scan(&cc.CableID, &cc.ClampID, &cc.Ord); err != nil {
+			return nil, err
+		}
+		out = append(out, cc)
+	}
+	return out, rows.Err()
+}
+
+// ListClampsForCable returns the clamps on a cable in ord sequence.
+func (s *Store) ListClampsForCable(projectID, cableID int64) ([]CableClamp, error) {
+	if _, err := s.GetCable(projectID, cableID); err != nil {
+		return nil, err
+	}
+	rows, err := s.db.Query(
+		`SELECT cable_id, clamp_id, ord
+		 FROM cable_clamps WHERE cable_id = ? ORDER BY ord`, cableID,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []CableClamp{}
+	for rows.Next() {
+		var cc CableClamp
+		if err := rows.Scan(&cc.CableID, &cc.ClampID, &cc.Ord); err != nil {
+			return nil, err
+		}
+		out = append(out, cc)
+	}
+	return out, rows.Err()
+}
+
+// AttachClampToCable inserts a (cable, clamp) row. If `ord` is 0, the
+// clamp is appended at the end. Otherwise existing rows at or after
+// `ord` shift up by 1 to make room.
+func (s *Store) AttachClampToCable(projectID, cableID, clampID int64, ord int) (*CableClamp, error) {
+	if _, err := s.GetCable(projectID, cableID); err != nil {
+		return nil, err
+	}
+	if _, err := s.GetClamp(projectID, clampID); err != nil {
+		return nil, fmt.Errorf("%w: clamp not found", ErrInvalidInput)
+	}
+	tx, err := s.db.Begin()
+	if err != nil {
+		return nil, err
+	}
+	defer tx.Rollback()
+	// Refuse loops — UNIQUE (cable_id, clamp_id) enforces this, but a
+	// pre-check gives a clearer error.
+	var exists int
+	if err := tx.QueryRow(
+		`SELECT COUNT(*) FROM cable_clamps WHERE cable_id = ? AND clamp_id = ?`,
+		cableID, clampID,
+	).Scan(&exists); err != nil {
+		return nil, err
+	}
+	if exists > 0 {
+		return nil, fmt.Errorf("%w: clamp %d already on cable %d", ErrConflict, clampID, cableID)
+	}
+	var maxOrd sql.NullInt64
+	if err := tx.QueryRow(
+		`SELECT MAX(ord) FROM cable_clamps WHERE cable_id = ?`, cableID,
+	).Scan(&maxOrd); err != nil {
+		return nil, err
+	}
+	current := 0
+	if maxOrd.Valid {
+		current = int(maxOrd.Int64)
+	}
+	if ord <= 0 || ord > current+1 {
+		ord = current + 1
+	} else if ord <= current {
+		// Shift existing rows at ord..current up by 1 to free the slot.
+		// SQLite UPDATE doesn't support ORDER BY (no UPDATE-with-temp
+		// trick available), so a single `ord = ord + 1` would collide
+		// with the UNIQUE (cable_id, ord) constraint during the bulk
+		// update. Two-pass avoids the conflict: bump to a high offset
+		// first, then settle back to ord+1.
+		if _, err := tx.Exec(
+			`UPDATE cable_clamps SET ord = ord + 10000
+			 WHERE cable_id = ? AND ord >= ?`, cableID, ord,
+		); err != nil {
+			return nil, mapWriteErr(err)
+		}
+		if _, err := tx.Exec(
+			`UPDATE cable_clamps SET ord = ord - 10000 + 1
+			 WHERE cable_id = ? AND ord >= ?`, cableID, 10000+ord,
+		); err != nil {
+			return nil, mapWriteErr(err)
+		}
+	}
+	if _, err := tx.Exec(
+		`INSERT INTO cable_clamps (cable_id, clamp_id, ord) VALUES (?, ?, ?)`,
+		cableID, clampID, ord,
+	); err != nil {
+		return nil, mapWriteErr(err)
+	}
+	if err := tx.Commit(); err != nil {
+		return nil, err
+	}
+	return &CableClamp{CableID: cableID, ClampID: clampID, Ord: ord}, nil
+}
+
+// DetachClampFromCable removes a clamp from a cable's polyline. The
+// trailing rows close up to keep `ord` contiguous.
+func (s *Store) DetachClampFromCable(projectID, cableID, clampID int64) error {
+	if _, err := s.GetCable(projectID, cableID); err != nil {
+		return err
+	}
+	tx, err := s.db.Begin()
+	if err != nil {
+		return err
+	}
+	defer tx.Rollback()
+	var removed sql.NullInt64
+	if err := tx.QueryRow(
+		`SELECT ord FROM cable_clamps WHERE cable_id = ? AND clamp_id = ?`,
+		cableID, clampID,
+	).Scan(&removed); err != nil {
+		if errors.Is(err, sql.ErrNoRows) {
+			return ErrNotFound
+		}
+		return err
+	}
+	if _, err := tx.Exec(
+		`DELETE FROM cable_clamps WHERE cable_id = ? AND clamp_id = ?`,
+		cableID, clampID,
+	); err != nil {
+		return mapWriteErr(err)
+	}
+	// Close the gap: anyone with ord > removed slides down by 1.
+	if _, err := tx.Exec(
+		`UPDATE cable_clamps SET ord = ord - 1
+		 WHERE cable_id = ? AND ord > ?`, cableID, removed.Int64,
+	); err != nil {
+		return mapWriteErr(err)
+	}
+	return tx.Commit()
+}
+
+// ReorderCableClamps replaces the whole clamp sequence on a cable with
+// the given clamp IDs, in order. Every member of clampIDs must already
+// be a valid clamp in the same project; duplicates → ErrConflict.
+func (s *Store) ReorderCableClamps(projectID, cableID int64, clampIDs []int64) ([]CableClamp, error) {
+	if _, err := s.GetCable(projectID, cableID); err != nil {
+		return nil, err
+	}
+	seen := map[int64]bool{}
+	for _, cid := range clampIDs {
+		if seen[cid] {
+			return nil, fmt.Errorf("%w: duplicate clamp %d", ErrConflict, cid)
+		}
+		seen[cid] = true
+		if _, err := s.GetClamp(projectID, cid); err != nil {
+			return nil, fmt.Errorf("%w: clamp %d not in project", ErrInvalidInput, cid)
+		}
+	}
+	tx, err := s.db.Begin()
+	if err != nil {
+		return nil, err
+	}
+	defer tx.Rollback()
+	if _, err := tx.Exec(`DELETE FROM cable_clamps WHERE cable_id = ?`, cableID); err != nil {
+		return nil, mapWriteErr(err)
+	}
+	out := make([]CableClamp, 0, len(clampIDs))
+	for i, cid := range clampIDs {
+		ord := i + 1
+		if _, err := tx.Exec(
+			`INSERT INTO cable_clamps (cable_id, clamp_id, ord) VALUES (?, ?, ?)`,
+			cableID, cid, ord,
+		); err != nil {
+			return nil, mapWriteErr(err)
+		}
+		out = append(out, CableClamp{CableID: cableID, ClampID: cid, Ord: ord})
+	}
+	if err := tx.Commit(); err != nil {
+		return nil, err
+	}
+	return out, nil
+}

internal/db/clamps_test.go

@@ -0,0 +1,188 @@
+package db
+
+import (
+	"errors"
+	"testing"
+)
+
+func TestCreateClamp_Basic(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	c, err := s.CreateClamp(p.ID, ClampCreate{X: 100, Y: 200, Label: "trunk-1"})
+	if err != nil {
+		t.Fatalf("create: %v", err)
+	}
+	if c.X != 100 || c.Y != 200 || c.Label != "trunk-1" {
+		t.Errorf("bad shape: %+v", c)
+	}
+	if c.ProjectID != p.ID {
+		t.Errorf("project_id mismatch: got %d, want %d", c.ProjectID, p.ID)
+	}
+}
+
+func TestUpdateClamp_PositionAndLabel(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	c, _ := s.CreateClamp(p.ID, ClampCreate{X: 0, Y: 0})
+	nx, ny := 50.0, 75.0
+	lbl := "renamed"
+	upd, err := s.UpdateClamp(p.ID, c.ID, ClampUpdate{X: &nx, Y: &ny, Label: &lbl})
+	if err != nil {
+		t.Fatalf("update: %v", err)
+	}
+	if upd.X != 50 || upd.Y != 75 || upd.Label != "renamed" {
+		t.Errorf("update didn't take: %+v", upd)
+	}
+}
+
+func TestDeleteClamp_CascadesToCableClamps(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	pcT := builtInTypeID(t, s, "PC")
+	a, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "A", TypeID: &pcT, X: 0, Y: 0, Width: 100, Height: 35})
+	b, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "B", TypeID: &pcT, X: 200, Y: 0, Width: 100, Height: 35})
+	cab, _ := s.CreateCable(p.ID, CableCreate{TypeID: 1,
+		From: CableEndpoint{DeviceID: &a.ID}, To: CableEndpoint{DeviceID: &b.ID}})
+	cl, _ := s.CreateClamp(p.ID, ClampCreate{X: 100, Y: 50})
+	if _, err := s.AttachClampToCable(p.ID, cab.ID, cl.ID, 0); err != nil {
+		t.Fatalf("attach: %v", err)
+	}
+	if err := s.DeleteClamp(p.ID, cl.ID); err != nil {
+		t.Fatalf("delete: %v", err)
+	}
+	rows, _ := s.ListClampsForCable(p.ID, cab.ID)
+	if len(rows) != 0 {
+		t.Errorf("cable_clamps not cleared: %+v", rows)
+	}
+}
+
+func TestAttachClampToCable_AppendsAndOrders(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	pcT := builtInTypeID(t, s, "PC")
+	a, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "A", TypeID: &pcT, X: 0, Y: 0, Width: 100, Height: 35})
+	b, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "B", TypeID: &pcT, X: 200, Y: 0, Width: 100, Height: 35})
+	cab, _ := s.CreateCable(p.ID, CableCreate{TypeID: 1,
+		From: CableEndpoint{DeviceID: &a.ID}, To: CableEndpoint{DeviceID: &b.ID}})
+	c1, _ := s.CreateClamp(p.ID, ClampCreate{X: 50, Y: 0})
+	c2, _ := s.CreateClamp(p.ID, ClampCreate{X: 100, Y: 0})
+	c3, _ := s.CreateClamp(p.ID, ClampCreate{X: 150, Y: 0})
+	cc1, _ := s.AttachClampToCable(p.ID, cab.ID, c1.ID, 0)
+	cc2, _ := s.AttachClampToCable(p.ID, cab.ID, c2.ID, 0)
+	cc3, _ := s.AttachClampToCable(p.ID, cab.ID, c3.ID, 0)
+	if cc1.Ord != 1 || cc2.Ord != 2 || cc3.Ord != 3 {
+		t.Errorf("ord sequence wrong: %d, %d, %d", cc1.Ord, cc2.Ord, cc3.Ord)
+	}
+}
+
+func TestAttachClampToCable_InsertShiftsExisting(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	pcT := builtInTypeID(t, s, "PC")
+	a, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "A", TypeID: &pcT, X: 0, Y: 0, Width: 100, Height: 35})
+	b, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "B", TypeID: &pcT, X: 200, Y: 0, Width: 100, Height: 35})
+	cab, _ := s.CreateCable(p.ID, CableCreate{TypeID: 1,
+		From: CableEndpoint{DeviceID: &a.ID}, To: CableEndpoint{DeviceID: &b.ID}})
+	c1, _ := s.CreateClamp(p.ID, ClampCreate{X: 50, Y: 0})
+	c2, _ := s.CreateClamp(p.ID, ClampCreate{X: 100, Y: 0})
+	c3, _ := s.CreateClamp(p.ID, ClampCreate{X: 150, Y: 0})
+	_, _ = s.AttachClampToCable(p.ID, cab.ID, c1.ID, 0) // ord=1
+	_, _ = s.AttachClampToCable(p.ID, cab.ID, c2.ID, 0) // ord=2
+	// Insert c3 between c1 and c2 → c3 gets ord=2, old c2 bumps to 3.
+	if _, err := s.AttachClampToCable(p.ID, cab.ID, c3.ID, 2); err != nil {
+		t.Fatalf("attach mid: %v", err)
+	}
+	got, _ := s.ListClampsForCable(p.ID, cab.ID)
+	if len(got) != 3 {
+		t.Fatalf("len = %d, want 3: %+v", len(got), got)
+	}
+	want := []struct{ id int64; ord int }{
+		{c1.ID, 1}, {c3.ID, 2}, {c2.ID, 3},
+	}
+	for i, w := range want {
+		if got[i].ClampID != w.id || got[i].Ord != w.ord {
+			t.Errorf("[%d] got %+v, want clamp=%d ord=%d", i, got[i], w.id, w.ord)
+		}
+	}
+}
+
+func TestAttachClampToCable_DuplicateRejected(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	pcT := builtInTypeID(t, s, "PC")
+	a, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "A", TypeID: &pcT, X: 0, Y: 0, Width: 100, Height: 35})
+	b, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "B", TypeID: &pcT, X: 200, Y: 0, Width: 100, Height: 35})
+	cab, _ := s.CreateCable(p.ID, CableCreate{TypeID: 1,
+		From: CableEndpoint{DeviceID: &a.ID}, To: CableEndpoint{DeviceID: &b.ID}})
+	c1, _ := s.CreateClamp(p.ID, ClampCreate{X: 50, Y: 0})
+	_, _ = s.AttachClampToCable(p.ID, cab.ID, c1.ID, 0)
+	if _, err := s.AttachClampToCable(p.ID, cab.ID, c1.ID, 0); !errors.Is(err, ErrConflict) {
+		t.Errorf("duplicate err = %v, want ErrConflict", err)
+	}
+}
+
+func TestDetachClampFromCable_ClosesGap(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	pcT := builtInTypeID(t, s, "PC")
+	a, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "A", TypeID: &pcT, X: 0, Y: 0, Width: 100, Height: 35})
+	b, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "B", TypeID: &pcT, X: 200, Y: 0, Width: 100, Height: 35})
+	cab, _ := s.CreateCable(p.ID, CableCreate{TypeID: 1,
+		From: CableEndpoint{DeviceID: &a.ID}, To: CableEndpoint{DeviceID: &b.ID}})
+	c1, _ := s.CreateClamp(p.ID, ClampCreate{X: 50, Y: 0})
+	c2, _ := s.CreateClamp(p.ID, ClampCreate{X: 100, Y: 0})
+	c3, _ := s.CreateClamp(p.ID, ClampCreate{X: 150, Y: 0})
+	_, _ = s.AttachClampToCable(p.ID, cab.ID, c1.ID, 0)
+	_, _ = s.AttachClampToCable(p.ID, cab.ID, c2.ID, 0)
+	_, _ = s.AttachClampToCable(p.ID, cab.ID, c3.ID, 0)
+	if err := s.DetachClampFromCable(p.ID, cab.ID, c2.ID); err != nil {
+		t.Fatalf("detach: %v", err)
+	}
+	got, _ := s.ListClampsForCable(p.ID, cab.ID)
+	if len(got) != 2 {
+		t.Fatalf("len = %d, want 2", len(got))
+	}
+	if got[0].ClampID != c1.ID || got[0].Ord != 1 {
+		t.Errorf("[0] = %+v", got[0])
+	}
+	if got[1].ClampID != c3.ID || got[1].Ord != 2 {
+		t.Errorf("[1] = %+v", got[1])
+	}
+}
+
+func TestReorderCableClamps_FullReplace(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	pcT := builtInTypeID(t, s, "PC")
+	a, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "A", TypeID: &pcT, X: 0, Y: 0, Width: 100, Height: 35})
+	b, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "B", TypeID: &pcT, X: 200, Y: 0, Width: 100, Height: 35})
+	cab, _ := s.CreateCable(p.ID, CableCreate{TypeID: 1,
+		From: CableEndpoint{DeviceID: &a.ID}, To: CableEndpoint{DeviceID: &b.ID}})
+	c1, _ := s.CreateClamp(p.ID, ClampCreate{X: 50, Y: 0})
+	c2, _ := s.CreateClamp(p.ID, ClampCreate{X: 100, Y: 0})
+	c3, _ := s.CreateClamp(p.ID, ClampCreate{X: 150, Y: 0})
+	if _, err := s.ReorderCableClamps(p.ID, cab.ID, []int64{c3.ID, c1.ID, c2.ID}); err != nil {
+		t.Fatalf("reorder: %v", err)
+	}
+	got, _ := s.ListClampsForCable(p.ID, cab.ID)
+	if len(got) != 3 {
+		t.Fatalf("len = %d, want 3", len(got))
+	}
+	if got[0].ClampID != c3.ID || got[1].ClampID != c1.ID || got[2].ClampID != c2.ID {
+		t.Errorf("order wrong: %+v", got)
+	}
+}
+
+func TestSnapshot_IncludesClamps(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	_, _ = s.CreateClamp(p.ID, ClampCreate{X: 10, Y: 20})
+	_, _ = s.CreateClamp(p.ID, ClampCreate{X: 30, Y: 40})
+	snap, err := s.Snapshot(p.ID)
+	if err != nil {
+		t.Fatalf("snapshot: %v", err)
+	}
+	if len(snap.Clamps) != 2 {
+		t.Errorf("clamps in snapshot = %d, want 2", len(snap.Clamps))
+	}
+}

internal/db/connection_requirements.go

@@ -0,0 +1,192 @@
+package db
+
+import (
+	"database/sql"
+	"errors"
+	"fmt"
+)
+
+// ConnectionRequirementCreate is the create-shape. Server normalises
+// from/to into (pair_lo, pair_hi) so (A,B,T) and (B,A,T) collide.
+type ConnectionRequirementCreate struct {
+	FromDeviceID         int64
+	ToDeviceID           int64
+	PreferredCableTypeID *int64
+	MustConnect          *bool // pointer so "absent" defaults to true
+	Notes                string
+}
+
+// ConnectionRequirementUpdate is the partial-update shape. project_id +
+// the device pair are immutable post-create (changing either is best
+// modelled as delete-then-create — keeps pair_lo/pair_hi semantics simple).
+type ConnectionRequirementUpdate struct {
+	PreferredCableTypeID FrameRef // tri-state: leave / set / clear
+	MustConnect          *bool
+	Notes                *string
+}
+
+// CreateConnectionRequirement inserts a new requirement. Validates that
+// both devices live in projectID, that from != to, and that the
+// (project, pair_lo, pair_hi, preferred_cable_type_id) tuple is unique.
+func (s *Store) CreateConnectionRequirement(projectID int64, r ConnectionRequirementCreate) (*ConnectionRequirement, error) {
+	if r.FromDeviceID == r.ToDeviceID {
+		return nil, fmt.Errorf("%w: from_device_id and to_device_id must differ", ErrInvalidInput)
+	}
+	if _, err := s.GetProject(projectID); err != nil {
+		return nil, err
+	}
+	if _, err := s.GetDevice(projectID, r.FromDeviceID); err != nil {
+		if errors.Is(err, ErrNotFound) {
+			return nil, fmt.Errorf("%w: from_device_id %d not in project %d", ErrInvalidInput, r.FromDeviceID, projectID)
+		}
+		return nil, err
+	}
+	if _, err := s.GetDevice(projectID, r.ToDeviceID); err != nil {
+		if errors.Is(err, ErrNotFound) {
+			return nil, fmt.Errorf("%w: to_device_id %d not in project %d", ErrInvalidInput, r.ToDeviceID, projectID)
+		}
+		return nil, err
+	}
+	if r.PreferredCableTypeID != nil {
+		if _, err := s.GetCableType(*r.PreferredCableTypeID); err != nil {
+			if errors.Is(err, ErrNotFound) {
+				return nil, fmt.Errorf("%w: preferred_cable_type_id %d not found", ErrInvalidInput, *r.PreferredCableTypeID)
+			}
+			return nil, err
+		}
+	}
+	must := true
+	if r.MustConnect != nil {
+		must = *r.MustConnect
+	}
+	mustInt := 0
+	if must {
+		mustInt = 1
+	}
+	lo, hi := r.FromDeviceID, r.ToDeviceID
+	if lo > hi {
+		lo, hi = hi, lo
+	}
+	res, err := s.db.Exec(
+		`INSERT INTO connection_requirements
+		   (project_id, from_device_id, to_device_id, preferred_cable_type_id,
+		    must_connect, notes, pair_lo, pair_hi)
+		 VALUES (?, ?, ?, ?, ?, ?, ?, ?)`,
+		projectID, r.FromDeviceID, r.ToDeviceID, nullableInt64(r.PreferredCableTypeID),
+		mustInt, r.Notes, lo, hi,
+	)
+	if err != nil {
+		return nil, mapWriteErr(err)
+	}
+	id, _ := res.LastInsertId()
+	return s.GetConnectionRequirement(projectID, id)
+}
+
+// GetConnectionRequirement loads one by id, project-scoped.
+func (s *Store) GetConnectionRequirement(projectID, id int64) (*ConnectionRequirement, error) {
+	var r ConnectionRequirement
+	var ct sql.NullInt64
+	var must int
+	err := s.db.QueryRow(
+		`SELECT id, project_id, from_device_id, to_device_id, preferred_cable_type_id,
+		        must_connect, notes, created_at, updated_at
+		 FROM connection_requirements WHERE id = ? AND project_id = ?`, id, projectID,
+	).Scan(&r.ID, &r.ProjectID, &r.FromDeviceID, &r.ToDeviceID, &ct,
+		&must, &r.Notes, &r.CreatedAt, &r.UpdatedAt)
+	if errors.Is(err, sql.ErrNoRows) {
+		return nil, ErrNotFound
+	}
+	if err != nil {
+		return nil, err
+	}
+	if ct.Valid {
+		v := ct.Int64
+		r.PreferredCableTypeID = &v
+	}
+	r.MustConnect = must != 0
+	return &r, nil
+}
+
+// ListConnectionRequirements returns every requirement in a project,
+// ordered by id (insertion order).
+func (s *Store) ListConnectionRequirements(projectID int64) ([]ConnectionRequirement, error) {
+	rows, err := s.db.Query(
+		`SELECT id, project_id, from_device_id, to_device_id, preferred_cable_type_id,
+		        must_connect, notes, created_at, updated_at
+		 FROM connection_requirements WHERE project_id = ? ORDER BY id`, projectID,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []ConnectionRequirement{}
+	for rows.Next() {
+		var r ConnectionRequirement
+		var ct sql.NullInt64
+		var must int
+		if err := rows.Scan(&r.ID, &r.ProjectID, &r.FromDeviceID, &r.ToDeviceID, &ct,
+			&must, &r.Notes, &r.CreatedAt, &r.UpdatedAt); err != nil {
+			return nil, err
+		}
+		if ct.Valid {
+			v := ct.Int64
+			r.PreferredCableTypeID = &v
+		}
+		r.MustConnect = must != 0
+		out = append(out, r)
+	}
+	return out, rows.Err()
+}
+
+// UpdateConnectionRequirement applies a partial update. preferred_cable_type_id
+// uses the FrameRef tri-state; must_connect + notes are plain pointers.
+// The (from, to) pair is immutable on PATCH — delete + recreate to change.
+func (s *Store) UpdateConnectionRequirement(projectID, id int64, u ConnectionRequirementUpdate) (*ConnectionRequirement, error) {
+	cur, err := s.GetConnectionRequirement(projectID, id)
+	if err != nil {
+		return nil, err
+	}
+	if u.PreferredCableTypeID.Set {
+		if u.PreferredCableTypeID.ID != nil {
+			if _, err := s.GetCableType(*u.PreferredCableTypeID.ID); err != nil {
+				if errors.Is(err, ErrNotFound) {
+					return nil, fmt.Errorf("%w: preferred_cable_type_id %d not found", ErrInvalidInput, *u.PreferredCableTypeID.ID)
+				}
+				return nil, err
+			}
+		}
+		cur.PreferredCableTypeID = u.PreferredCableTypeID.ID
+	}
+	if u.MustConnect != nil {
+		cur.MustConnect = *u.MustConnect
+	}
+	if u.Notes != nil {
+		cur.Notes = *u.Notes
+	}
+	mustInt := 0
+	if cur.MustConnect {
+		mustInt = 1
+	}
+	if _, err := s.db.Exec(
+		`UPDATE connection_requirements
+		 SET preferred_cable_type_id = ?, must_connect = ?, notes = ?, updated_at = datetime('now')
+		 WHERE id = ? AND project_id = ?`,
+		nullableInt64(cur.PreferredCableTypeID), mustInt, cur.Notes, id, projectID,
+	); err != nil {
+		return nil, mapWriteErr(err)
+	}
+	return s.GetConnectionRequirement(projectID, id)
+}
+
+// DeleteConnectionRequirement removes a requirement by id, project-scoped.
+func (s *Store) DeleteConnectionRequirement(projectID, id int64) error {
+	if _, err := s.GetConnectionRequirement(projectID, id); err != nil {
+		return err
+	}
+	if _, err := s.db.Exec(
+		`DELETE FROM connection_requirements WHERE id = ? AND project_id = ?`, id, projectID,
+	); err != nil {
+		return err
+	}
+	return nil
+}

internal/db/connection_requirements_test.go

@@ -0,0 +1,181 @@
+package db
+
+import (
+	"errors"
+	"testing"
+)
+
+func setupTwoDevices(t *testing.T, s *Store) (int64, int64, int64) {
+	t.Helper()
+	p, _ := s.CreateProject("LOFT", "", "")
+	a, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "NAS", X: 0, Y: 0, Width: 100, Height: 35})
+	b, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "Switch", X: 200, Y: 0, Width: 100, Height: 35})
+	return p.ID, a.ID, b.ID
+}
+
+func TestCreateConnReq_Basic(t *testing.T) {
+	s := newTestStore(t)
+	pid, a, b := setupTwoDevices(t, s)
+	rj45 := int64(5)
+	r, err := s.CreateConnectionRequirement(pid, ConnectionRequirementCreate{
+		FromDeviceID: a, ToDeviceID: b, PreferredCableTypeID: &rj45,
+	})
+	if err != nil {
+		t.Fatalf("create: %v", err)
+	}
+	if !r.MustConnect {
+		t.Errorf("must_connect default should be true")
+	}
+	if r.PreferredCableTypeID == nil || *r.PreferredCableTypeID != rj45 {
+		t.Errorf("preferred_cable_type_id wrong: %+v", r.PreferredCableTypeID)
+	}
+}
+
+func TestCreateConnReq_PairNormalisationRejectsReverse(t *testing.T) {
+	s := newTestStore(t)
+	pid, a, b := setupTwoDevices(t, s)
+	rj45 := int64(5)
+	if _, err := s.CreateConnectionRequirement(pid, ConnectionRequirementCreate{
+		FromDeviceID: a, ToDeviceID: b, PreferredCableTypeID: &rj45,
+	}); err != nil {
+		t.Fatalf("first: %v", err)
+	}
+	// (B, A, RJ45) should collide on UNIQUE (pair_lo, pair_hi, type).
+	_, err := s.CreateConnectionRequirement(pid, ConnectionRequirementCreate{
+		FromDeviceID: b, ToDeviceID: a, PreferredCableTypeID: &rj45,
+	})
+	if !errors.Is(err, ErrConflict) {
+		t.Errorf("reverse pair err = %v, want ErrConflict", err)
+	}
+}
+
+func TestCreateConnReq_DifferentCableTypesCoexist(t *testing.T) {
+	s := newTestStore(t)
+	pid, a, b := setupTwoDevices(t, s)
+	rj45, power := int64(5), int64(1)
+	if _, err := s.CreateConnectionRequirement(pid, ConnectionRequirementCreate{
+		FromDeviceID: a, ToDeviceID: b, PreferredCableTypeID: &rj45,
+	}); err != nil {
+		t.Fatalf("rj45: %v", err)
+	}
+	if _, err := s.CreateConnectionRequirement(pid, ConnectionRequirementCreate{
+		FromDeviceID: a, ToDeviceID: b, PreferredCableTypeID: &power,
+	}); err != nil {
+		t.Errorf("power on same pair should be allowed: %v", err)
+	}
+}
+
+func TestCreateConnReq_SelfLoopRejected(t *testing.T) {
+	s := newTestStore(t)
+	pid, a, _ := setupTwoDevices(t, s)
+	_, err := s.CreateConnectionRequirement(pid, ConnectionRequirementCreate{
+		FromDeviceID: a, ToDeviceID: a,
+	})
+	if !errors.Is(err, ErrInvalidInput) {
+		t.Errorf("self-loop err = %v, want ErrInvalidInput", err)
+	}
+}
+
+func TestCreateConnReq_CrossProjectDeviceRejected(t *testing.T) {
+	s := newTestStore(t)
+	pid, a, _ := setupTwoDevices(t, s)
+	p2, _ := s.CreateProject("OFFICE", "", "")
+	b2, _ := s.CreateDevice(p2.ID, DeviceCreate{Name: "X", X: 0, Y: 0, Width: 100, Height: 35})
+	_, err := s.CreateConnectionRequirement(pid, ConnectionRequirementCreate{
+		FromDeviceID: a, ToDeviceID: b2.ID,
+	})
+	if !errors.Is(err, ErrInvalidInput) {
+		t.Errorf("cross-project to-device err = %v, want ErrInvalidInput", err)
+	}
+}
+
+func TestCreateConnReq_NullCableTypeUniqueByPair(t *testing.T) {
+	// Two NULL-cable-type reqs on the same pair are NOT a conflict in
+	// SQLite (NULL != NULL in UNIQUE comparisons). This is fine — they
+	// represent "solver picks" both times; the second wins when solving.
+	s := newTestStore(t)
+	pid, a, b := setupTwoDevices(t, s)
+	if _, err := s.CreateConnectionRequirement(pid, ConnectionRequirementCreate{
+		FromDeviceID: a, ToDeviceID: b,
+	}); err != nil {
+		t.Fatalf("first: %v", err)
+	}
+	if _, err := s.CreateConnectionRequirement(pid, ConnectionRequirementCreate{
+		FromDeviceID: a, ToDeviceID: b,
+	}); err != nil {
+		t.Errorf("second NULL-type req should be allowed (SQLite NULL != NULL): %v", err)
+	}
+}
+
+func TestUpdateConnReq_PartialFields(t *testing.T) {
+	s := newTestStore(t)
+	pid, a, b := setupTwoDevices(t, s)
+	rj45, power := int64(5), int64(1)
+	r, _ := s.CreateConnectionRequirement(pid, ConnectionRequirementCreate{
+		FromDeviceID: a, ToDeviceID: b, PreferredCableTypeID: &rj45,
+	})
+	notes := "important"
+	must := false
+	updated, err := s.UpdateConnectionRequirement(pid, r.ID, ConnectionRequirementUpdate{
+		PreferredCableTypeID: FrameRef{Set: true, ID: &power},
+		MustConnect:          &must,
+		Notes:                &notes,
+	})
+	if err != nil {
+		t.Fatalf("update: %v", err)
+	}
+	if updated.PreferredCableTypeID == nil || *updated.PreferredCableTypeID != power {
+		t.Errorf("cable type not switched: %+v", updated.PreferredCableTypeID)
+	}
+	if updated.MustConnect {
+		t.Errorf("must_connect should be false")
+	}
+	if updated.Notes != "important" {
+		t.Errorf("notes = %q", updated.Notes)
+	}
+
+	// Clear the cable type.
+	cleared, _ := s.UpdateConnectionRequirement(pid, r.ID, ConnectionRequirementUpdate{
+		PreferredCableTypeID: FrameRef{Set: true, ID: nil},
+	})
+	if cleared.PreferredCableTypeID != nil {
+		t.Errorf("preferred_cable_type_id should be nil after clear; got %v", *cleared.PreferredCableTypeID)
+	}
+}
+
+func TestDeleteConnReq_CascadesOnDeviceDelete(t *testing.T) {
+	s := newTestStore(t)
+	pid, a, b := setupTwoDevices(t, s)
+	r, _ := s.CreateConnectionRequirement(pid, ConnectionRequirementCreate{
+		FromDeviceID: a, ToDeviceID: b,
+	})
+	if err := s.DeleteDevice(pid, a); err != nil {
+		t.Fatalf("delete device a: %v", err)
+	}
+	if _, err := s.GetConnectionRequirement(pid, r.ID); !errors.Is(err, ErrNotFound) {
+		t.Errorf("requirement should be gone after device delete; got %v", err)
+	}
+}
+
+func TestSnapshot_IncludesConnectionRequirements(t *testing.T) {
+	s := newTestStore(t)
+	pid, a, b := setupTwoDevices(t, s)
+	_, _ = s.CreateConnectionRequirement(pid, ConnectionRequirementCreate{
+		FromDeviceID: a, ToDeviceID: b,
+	})
+	snap, err := s.Snapshot(pid)
+	if err != nil {
+		t.Fatalf("snapshot: %v", err)
+	}
+	if len(snap.ConnectionRequirements) != 1 {
+		t.Errorf("snapshot.connection_requirements = %d, want 1", len(snap.ConnectionRequirements))
+	}
+}
+
+func TestDeleteConnReq_NotFound(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	if err := s.DeleteConnectionRequirement(p.ID, 999); !errors.Is(err, ErrNotFound) {
+		t.Errorf("got %v, want ErrNotFound", err)
+	}
+}

internal/db/db.go

@@ -1,4 +1,4 @@
-// Package db owns SQLite access for mCables: migrations runner + the
+// Package db owns SQLite access for CableGUI: migrations runner + the
 // query layer (store.go). The Store wraps a *sql.DB with helpers; tests
 // and the HTTP layer take a *Store, never a raw *sql.DB.
 package db

internal/db/device_types.go

@@ -0,0 +1,351 @@
+package db
+
+import (
+	"database/sql"
+	"errors"
+	"fmt"
+	"strings"
+)
+
+// ErrForbidden is the sentinel for "you can't mutate this row" — used by
+// PATCH/DELETE on built-in device_types.
+var ErrForbidden = errors.New("forbidden")
+
+// -----------------------------------------------------------------------------
+// device_types
+// -----------------------------------------------------------------------------
+
+// DeviceTypeCreate is the shape POSTed under /api/projects/:pid/device-types.
+// project_id is the URL :pid; the caller never passes it in the body.
+type DeviceTypeCreate struct {
+	Name        string
+	Kind        string
+	Icon        string
+	Description string
+	Ports       []DeviceTypePortCreate
+}
+
+// DeviceTypePortCreate is one row in the type's port profile.
+type DeviceTypePortCreate struct {
+	CableTypeID int64
+	LabelPrefix string
+	Count       int
+	Edge        string
+	SortOrder   int
+}
+
+// DeviceTypeUpdate is the partial-update shape. Built-in types reject
+// any PATCH at the store level.
+type DeviceTypeUpdate struct {
+	Name        *string
+	Kind        *string
+	Icon        *string
+	Description *string
+	// Ports != nil means "replace the port profile with this set".
+	Ports *[]DeviceTypePortCreate
+}
+
+// CreateDeviceType inserts a project-custom row + its port profile in
+// one transaction. projectID must be non-zero (built-ins are seed-only).
+func (s *Store) CreateDeviceType(projectID int64, dt DeviceTypeCreate) (*DeviceType, error) {
+	name := strings.TrimSpace(dt.Name)
+	if name == "" {
+		return nil, fmt.Errorf("%w: name is required", ErrInvalidInput)
+	}
+	if projectID == 0 {
+		return nil, fmt.Errorf("%w: project_id is required (built-ins are seed-only)", ErrInvalidInput)
+	}
+	if _, err := s.GetProject(projectID); err != nil {
+		return nil, err
+	}
+	// Forbid name-collisions with built-ins (UNIQUE(project_id,name)
+	// only enforces inside the project; built-ins have project_id IS
+	// NULL so the constraint doesn't catch them).
+	var builtinClash int
+	if err := s.db.QueryRow(
+		`SELECT COUNT(*) FROM device_types WHERE project_id IS NULL AND name = ?`, name,
+	).Scan(&builtinClash); err != nil {
+		return nil, err
+	}
+	if builtinClash > 0 {
+		return nil, fmt.Errorf("%w: name %q clashes with a built-in device type", ErrConflict, name)
+	}
+
+	kind := strings.TrimSpace(dt.Kind)
+	if kind == "" {
+		kind = "generic"
+	}
+	desc := dt.Description
+	var iconPtr any
+	if icon := strings.TrimSpace(dt.Icon); icon != "" {
+		iconPtr = icon
+	}
+
+	tx, err := s.db.Begin()
+	if err != nil {
+		return nil, err
+	}
+	defer tx.Rollback()
+
+	res, err := tx.Exec(
+		`INSERT INTO device_types (project_id, name, kind, icon, description, built_in)
+		 VALUES (?, ?, ?, ?, ?, 0)`,
+		projectID, name, kind, iconPtr, desc,
+	)
+	if err != nil {
+		return nil, mapWriteErr(err)
+	}
+	id, _ := res.LastInsertId()
+
+	for _, p := range dt.Ports {
+		if err := insertDeviceTypePort(tx, id, p); err != nil {
+			return nil, err
+		}
+	}
+	if err := tx.Commit(); err != nil {
+		return nil, err
+	}
+	return s.GetDeviceType(id)
+}
+
+func insertDeviceTypePort(tx *sql.Tx, deviceTypeID int64, p DeviceTypePortCreate) error {
+	if p.CableTypeID <= 0 {
+		return fmt.Errorf("%w: cable_type_id is required on each port row", ErrInvalidInput)
+	}
+	if p.Count <= 0 {
+		p.Count = 1
+	}
+	edge := strings.TrimSpace(p.Edge)
+	if edge == "" {
+		edge = "bottom"
+	}
+	if edge != "top" && edge != "bottom" && edge != "left" && edge != "right" {
+		return fmt.Errorf("%w: edge must be top/bottom/left/right", ErrInvalidInput)
+	}
+	_, err := tx.Exec(
+		`INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+		 VALUES (?, ?, ?, ?, ?, ?)`,
+		deviceTypeID, p.CableTypeID, p.LabelPrefix, p.Count, edge, p.SortOrder,
+	)
+	if err != nil {
+		return mapWriteErr(err)
+	}
+	return nil
+}
+
+// GetDeviceType loads a single type row (built-in OR project-custom)
+// with its port profile.
+func (s *Store) GetDeviceType(id int64) (*DeviceType, error) {
+	dt, err := scanDeviceTypeByID(s.db, id)
+	if err != nil {
+		return nil, err
+	}
+	ports, err := s.listDeviceTypePorts(id)
+	if err != nil {
+		return nil, err
+	}
+	dt.Ports = ports
+	return dt, nil
+}
+
+func scanDeviceTypeByID(d *sql.DB, id int64) (*DeviceType, error) {
+	var dt DeviceType
+	var proj sql.NullInt64
+	var icon sql.NullString
+	var built int
+	err := d.QueryRow(
+		`SELECT id, project_id, name, kind, icon, description, built_in, created_at, updated_at
+		 FROM device_types WHERE id = ?`, id,
+	).Scan(&dt.ID, &proj, &dt.Name, &dt.Kind, &icon, &dt.Description, &built,
+		&dt.CreatedAt, &dt.UpdatedAt)
+	if errors.Is(err, sql.ErrNoRows) {
+		return nil, ErrNotFound
+	}
+	if err != nil {
+		return nil, err
+	}
+	if proj.Valid {
+		v := proj.Int64
+		dt.ProjectID = &v
+	}
+	if icon.Valid {
+		dt.Icon = &icon.String
+	}
+	dt.BuiltIn = built != 0
+	return &dt, nil
+}
+
+// ListBuiltInDeviceTypes returns every built-in type (project_id IS NULL).
+func (s *Store) ListBuiltInDeviceTypes() ([]DeviceType, error) {
+	return s.listDeviceTypesWhere(`project_id IS NULL`, nil)
+}
+
+// ListDeviceTypesForProject returns built-ins + the project's custom
+// types, merged. Built-ins come first (insertion order), then custom by
+// id.
+func (s *Store) ListDeviceTypesForProject(projectID int64) ([]DeviceType, error) {
+	return s.listDeviceTypesWhere(
+		`project_id IS NULL OR project_id = ?`, []any{projectID},
+	)
+}
+
+func (s *Store) listDeviceTypesWhere(where string, args []any) ([]DeviceType, error) {
+	q := `SELECT id, project_id, name, kind, icon, description, built_in, created_at, updated_at
+	      FROM device_types WHERE ` + where +
+		` ORDER BY (project_id IS NOT NULL), id`
+	rows, err := s.db.Query(q, args...)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []DeviceType{}
+	for rows.Next() {
+		var dt DeviceType
+		var proj sql.NullInt64
+		var icon sql.NullString
+		var built int
+		if err := rows.Scan(&dt.ID, &proj, &dt.Name, &dt.Kind, &icon, &dt.Description, &built,
+			&dt.CreatedAt, &dt.UpdatedAt); err != nil {
+			return nil, err
+		}
+		if proj.Valid {
+			v := proj.Int64
+			dt.ProjectID = &v
+		}
+		if icon.Valid {
+			dt.Icon = &icon.String
+		}
+		dt.BuiltIn = built != 0
+		out = append(out, dt)
+	}
+	if err := rows.Err(); err != nil {
+		return nil, err
+	}
+	// Hydrate ports per row. Two queries per request is fine for the
+	// catalog size; switch to a single JOIN-and-group if it becomes hot.
+	for i := range out {
+		ps, err := s.listDeviceTypePorts(out[i].ID)
+		if err != nil {
+			return nil, err
+		}
+		out[i].Ports = ps
+	}
+	return out, nil
+}
+
+func (s *Store) listDeviceTypePorts(deviceTypeID int64) ([]DeviceTypePort, error) {
+	rows, err := s.db.Query(
+		`SELECT id, device_type_id, cable_type_id, label_prefix, count, edge, sort_order
+		 FROM device_type_ports WHERE device_type_id = ? ORDER BY sort_order, id`,
+		deviceTypeID,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []DeviceTypePort{}
+	for rows.Next() {
+		var p DeviceTypePort
+		if err := rows.Scan(&p.ID, &p.DeviceTypeID, &p.CableTypeID,
+			&p.LabelPrefix, &p.Count, &p.Edge, &p.SortOrder); err != nil {
+			return nil, err
+		}
+		out = append(out, p)
+	}
+	return out, rows.Err()
+}
+
+// UpdateDeviceType applies a partial update. Built-in rows are rejected
+// with ErrForbidden. Cross-project rows are rejected with ErrNotFound.
+// Replacing the port profile (Ports != nil) wipes and re-inserts.
+func (s *Store) UpdateDeviceType(projectID, id int64, u DeviceTypeUpdate) (*DeviceType, error) {
+	cur, err := s.GetDeviceType(id)
+	if err != nil {
+		return nil, err
+	}
+	if cur.BuiltIn {
+		return nil, fmt.Errorf("%w: built-in device types are read-only", ErrForbidden)
+	}
+	if cur.ProjectID == nil || *cur.ProjectID != projectID {
+		return nil, ErrNotFound
+	}
+
+	if u.Name != nil {
+		v := strings.TrimSpace(*u.Name)
+		if v == "" {
+			return nil, fmt.Errorf("%w: name cannot be empty", ErrInvalidInput)
+		}
+		cur.Name = v
+	}
+	if u.Kind != nil {
+		v := strings.TrimSpace(*u.Kind)
+		if v == "" {
+			v = "generic"
+		}
+		cur.Kind = v
+	}
+	if u.Icon != nil {
+		v := strings.TrimSpace(*u.Icon)
+		if v == "" {
+			cur.Icon = nil
+		} else {
+			cur.Icon = &v
+		}
+	}
+	if u.Description != nil {
+		cur.Description = *u.Description
+	}
+
+	tx, err := s.db.Begin()
+	if err != nil {
+		return nil, err
+	}
+	defer tx.Rollback()
+
+	var iconArg any
+	if cur.Icon != nil {
+		iconArg = *cur.Icon
+	}
+	if _, err := tx.Exec(
+		`UPDATE device_types
+		 SET name = ?, kind = ?, icon = ?, description = ?, updated_at = datetime('now')
+		 WHERE id = ?`,
+		cur.Name, cur.Kind, iconArg, cur.Description, id,
+	); err != nil {
+		return nil, mapWriteErr(err)
+	}
+	if u.Ports != nil {
+		if _, err := tx.Exec(`DELETE FROM device_type_ports WHERE device_type_id = ?`, id); err != nil {
+			return nil, err
+		}
+		for _, p := range *u.Ports {
+			if err := insertDeviceTypePort(tx, id, p); err != nil {
+				return nil, err
+			}
+		}
+	}
+	if err := tx.Commit(); err != nil {
+		return nil, err
+	}
+	return s.GetDeviceType(id)
+}
+
+// DeleteDeviceType removes a project-custom row. Built-ins → ErrForbidden.
+// Cross-project → ErrNotFound. Cascades to device_type_ports (FK CASCADE)
+// and SET-NULLs the type_id on any device referencing it.
+func (s *Store) DeleteDeviceType(projectID, id int64) error {
+	cur, err := s.GetDeviceType(id)
+	if err != nil {
+		return err
+	}
+	if cur.BuiltIn {
+		return fmt.Errorf("%w: built-in device types are read-only", ErrForbidden)
+	}
+	if cur.ProjectID == nil || *cur.ProjectID != projectID {
+		return ErrNotFound
+	}
+	if _, err := s.db.Exec(`DELETE FROM device_types WHERE id = ?`, id); err != nil {
+		return err
+	}
+	return nil
+}

internal/db/device_types_test.go

@@ -0,0 +1,363 @@
+package db
+
+import (
+	"errors"
+	"testing"
+)
+
+// -------------------------------------------------------- catalog (seeded)
+
+func TestSeed_BuiltInDeviceTypes(t *testing.T) {
+	s := newTestStore(t)
+	got, err := s.ListBuiltInDeviceTypes()
+	if err != nil {
+		t.Fatalf("list: %v", err)
+	}
+	want := []string{
+		"NAS", "PC", "Mac", "Notebook", "TV", "Soundbar", "Switch", "fritz",
+		"ChromeCast", "SteamLink", "IOx-3", "IOx-6", "IOx-8",
+		"Screen", "Keyboard", "Mouse",
+		"Multi-plug 3", "Multi-plug 4", "Multi-plug 5", "Multi-plug 6", "Wifi-plug",
+	}
+	if len(got) != len(want) {
+		t.Fatalf("built-in count = %d, want %d", len(got), len(want))
+	}
+	for i, w := range want {
+		if got[i].Name != w {
+			t.Errorf("[%d] = %q, want %q", i, got[i].Name, w)
+		}
+		if !got[i].BuiltIn {
+			t.Errorf("[%d] %q should be built_in", i, got[i].Name)
+		}
+		if got[i].ProjectID != nil {
+			t.Errorf("[%d] %q should have project_id=nil", i, got[i].Name)
+		}
+	}
+}
+
+func TestSeed_PortProfiles(t *testing.T) {
+	s := newTestStore(t)
+	all, _ := s.ListBuiltInDeviceTypes()
+	byName := map[string]DeviceType{}
+	for _, d := range all {
+		byName[d.Name] = d
+	}
+	cases := map[string]struct {
+		totalPorts int // sum of count across profile rows
+	}{
+		"NAS":        {2},  // Power 1 + RJ45 1
+		"PC":         {5},  // Power 1 + RJ45 1 + HDMI 1 + USB 2
+		"Mac":        {4},  // Power 1 + HDMI 1 + USB 2
+		"Notebook":   {3},  // Power 1 + USB 2
+		"TV":         {3},  // Power 1 + HDMI 2
+		"Soundbar":   {2},  // Power 1 + HDMI 1
+		"Switch":     {6},  // Power 1 + RJ45 5
+		"fritz":      {5},  // Power 1 + RJ45 4
+		"ChromeCast": {2},  // Power 1 + HDMI 1
+		"SteamLink":  {4},  // Power 1 + HDMI 1 + USB 2
+		"IOx-3":        {4}, // Power In 1 + Power Out 3 (after v6)
+		"IOx-6":        {7}, // Power In 1 + Power Out 6 (after v6)
+		"IOx-8":        {9}, // Power In 1 + Power Out 8 (after v6)
+		"Screen":       {2}, // Power 1 + HDMI 1
+		"Keyboard":     {1}, // USB 1
+		"Mouse":        {1}, // USB 1
+		"Multi-plug 3": {4}, // Power In 1 + Power Out 3 (after v6)
+		"Multi-plug 4": {5}, // Power In 1 + Power Out 4 (after v6)
+		"Multi-plug 5": {6}, // Power In 1 + Power Out 5 (after v6)
+		"Multi-plug 6": {7}, // Power In 1 + Power Out 6 (after v6)
+		"Wifi-plug":    {2}, // Power In 1 + Power Out 1 (after v6)
+	}
+	for name, want := range cases {
+		dt, ok := byName[name]
+		if !ok {
+			t.Errorf("missing built-in %q", name)
+			continue
+		}
+		total := 0
+		for _, p := range dt.Ports {
+			total += p.Count
+		}
+		if total != want.totalPorts {
+			t.Errorf("%s: total ports = %d, want %d", name, total, want.totalPorts)
+		}
+	}
+}
+
+// TestSeed_PowerHubs locks down the post-migration-006 port profile for
+// every power-distribution device type: IOx-3/6/8, Multi-plug 3/4/5/6,
+// and Wifi-plug. Each carries exactly two profile rows — a single
+// "Power In" port on the top (back) edge and N "Power Out" ports on the
+// bottom (front) edge, where N is the device-specific output count.
+//
+// This test covers the v5 catalog identity (kind, icon, built-in) for
+// the 5 power-distribution types and the v6 port-profile fix for all
+// 8 hubs in one table.
+func TestSeed_PowerHubs(t *testing.T) {
+	s := newTestStore(t)
+	all, err := s.ListBuiltInDeviceTypes()
+	if err != nil {
+		t.Fatalf("list: %v", err)
+	}
+	if len(all) != 21 {
+		t.Errorf("built-in count = %d, want 21 (16 from v4 + 5 from v5)", len(all))
+	}
+	byName := map[string]DeviceType{}
+	for _, d := range all {
+		byName[d.Name] = d
+	}
+	cases := []struct {
+		name string
+		// kind/icon are only set for the 5 v5-power types; empty means
+		// "don't check" (the IOx-* keep their v4-seeded kind=hub icon=nil).
+		kind     string
+		icon     string
+		outCount int // N — number of "Power Out" outlets on the bottom edge
+	}{
+		// v5 catalog (kind+icon checked)
+		{name: "Multi-plug 3", kind: "hub", icon: "🔌", outCount: 3},
+		{name: "Multi-plug 4", kind: "hub", icon: "🔌", outCount: 4},
+		{name: "Multi-plug 5", kind: "hub", icon: "🔌", outCount: 5},
+		{name: "Multi-plug 6", kind: "hub", icon: "🔌", outCount: 6},
+		{name: "Wifi-plug", kind: "accessory", icon: "📶", outCount: 1},
+		// v4 hubs re-shaped by v6 (kind/icon left blank → not checked)
+		{name: "IOx-3", outCount: 3},
+		{name: "IOx-6", outCount: 6},
+		{name: "IOx-8", outCount: 8},
+	}
+	for _, c := range cases {
+		dt, ok := byName[c.name]
+		if !ok {
+			t.Errorf("missing %q", c.name)
+			continue
+		}
+		if !dt.BuiltIn {
+			t.Errorf("%s: built_in should be true", c.name)
+		}
+		if dt.ProjectID != nil {
+			t.Errorf("%s: project_id should be nil", c.name)
+		}
+		if c.kind != "" && dt.Kind != c.kind {
+			t.Errorf("%s: kind = %q, want %q", c.name, dt.Kind, c.kind)
+		}
+		if c.icon != "" && (dt.Icon == nil || *dt.Icon != c.icon) {
+			t.Errorf("%s: icon = %v, want %q", c.name, dt.Icon, c.icon)
+		}
+		if len(dt.Ports) != 2 {
+			t.Errorf("%s: expected 2 port-profile rows, got %d", c.name, len(dt.Ports))
+			continue
+		}
+		in := dt.Ports[0]
+		out := dt.Ports[1]
+		if in.CableTypeID != 1 || in.Count != 1 || in.Edge != "top" || in.LabelPrefix != "Power In" {
+			t.Errorf("%s: Power In row mismatch: %+v", c.name, in)
+		}
+		if out.CableTypeID != 1 || out.Count != c.outCount || out.Edge != "bottom" || out.LabelPrefix != "Power Out" {
+			t.Errorf("%s: Power Out row mismatch: %+v (want count=%d)", c.name, out, c.outCount)
+		}
+	}
+}
+
+// -------------------------------------------------------- CRUD (custom rows)
+
+func TestCreateDeviceType_CustomBasic(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	dt, err := s.CreateDeviceType(p.ID, DeviceTypeCreate{
+		Name: "DigitalCam", Kind: "accessory",
+		Description: "A camera with HDMI out",
+		Ports: []DeviceTypePortCreate{
+			{CableTypeID: 1, LabelPrefix: "Power", Count: 1},
+			{CableTypeID: 3, LabelPrefix: "HDMI", Count: 1, SortOrder: 1},
+		},
+	})
+	if err != nil {
+		t.Fatalf("create: %v", err)
+	}
+	if dt.BuiltIn {
+		t.Errorf("built_in should be false")
+	}
+	if dt.ProjectID == nil || *dt.ProjectID != p.ID {
+		t.Errorf("project_id mismatch: %+v", dt.ProjectID)
+	}
+	if len(dt.Ports) != 2 {
+		t.Errorf("port profile rows = %d, want 2", len(dt.Ports))
+	}
+}
+
+func TestCreateDeviceType_NameClashWithBuiltIn(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	_, err := s.CreateDeviceType(p.ID, DeviceTypeCreate{Name: "NAS"})
+	if !errors.Is(err, ErrConflict) {
+		t.Errorf("err = %v, want ErrConflict (NAS is built-in)", err)
+	}
+}
+
+func TestCreateDeviceType_PerProjectUnique(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	if _, err := s.CreateDeviceType(p.ID, DeviceTypeCreate{Name: "Foo"}); err != nil {
+		t.Fatalf("first: %v", err)
+	}
+	if _, err := s.CreateDeviceType(p.ID, DeviceTypeCreate{Name: "Foo"}); !errors.Is(err, ErrConflict) {
+		t.Errorf("dup err = %v, want ErrConflict", err)
+	}
+}
+
+func TestUpdateDeviceType_BuiltInForbidden(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	all, _ := s.ListBuiltInDeviceTypes()
+	nas := all[0]
+	newName := "renamed"
+	_, err := s.UpdateDeviceType(p.ID, nas.ID, DeviceTypeUpdate{Name: &newName})
+	if !errors.Is(err, ErrForbidden) {
+		t.Errorf("err = %v, want ErrForbidden", err)
+	}
+}
+
+func TestDeleteDeviceType_BuiltInForbidden(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	all, _ := s.ListBuiltInDeviceTypes()
+	if err := s.DeleteDeviceType(p.ID, all[0].ID); !errors.Is(err, ErrForbidden) {
+		t.Errorf("err = %v, want ErrForbidden", err)
+	}
+}
+
+func TestUpdateDeviceType_CrossProjectIsNotFound(t *testing.T) {
+	s := newTestStore(t)
+	p1, _ := s.CreateProject("LOFT", "", "")
+	p2, _ := s.CreateProject("OFFICE", "", "")
+	dt, _ := s.CreateDeviceType(p1.ID, DeviceTypeCreate{Name: "Foo"})
+	newName := "bar"
+	if _, err := s.UpdateDeviceType(p2.ID, dt.ID, DeviceTypeUpdate{Name: &newName}); !errors.Is(err, ErrNotFound) {
+		t.Errorf("err = %v, want ErrNotFound", err)
+	}
+}
+
+// -------------------------------------------------------- device + ports seed
+
+func TestCreateDevice_SeedsPortsFromBuiltInType(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	all, _ := s.ListBuiltInDeviceTypes()
+	var nasID int64
+	for _, dt := range all {
+		if dt.Name == "NAS" {
+			nasID = dt.ID
+			break
+		}
+	}
+	if nasID == 0 {
+		t.Fatal("NAS not in catalog")
+	}
+	d, err := s.CreateDevice(p.ID, DeviceCreate{
+		Name: "NAS-Loft", TypeID: &nasID,
+		X: 100, Y: 100, Width: 100, Height: 35,
+	})
+	if err != nil {
+		t.Fatalf("create: %v", err)
+	}
+	if d.TypeID == nil || *d.TypeID != nasID {
+		t.Errorf("type_id wrong: %+v", d.TypeID)
+	}
+	ports, _ := s.ListPortsForProject(p.ID)
+	if len(ports) != 2 {
+		t.Fatalf("port count = %d, want 2 (Power + RJ45)", len(ports))
+	}
+	for _, prt := range ports {
+		if prt.YOffset != 35 {
+			t.Errorf("port y_offset = %v, want 35 (bottom edge)", prt.YOffset)
+		}
+		if prt.XOffset <= 0 || prt.XOffset >= 100 {
+			t.Errorf("port x_offset = %v, want between 0 and 100", prt.XOffset)
+		}
+		if prt.Label == nil {
+			t.Errorf("port label = nil, want non-nil (label_prefix is set)")
+		}
+	}
+}
+
+func TestCreateDevice_SeedsPortsForPC_FourGroupsFiveTotal(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	all, _ := s.ListBuiltInDeviceTypes()
+	var pcID int64
+	for _, dt := range all {
+		if dt.Name == "PC" {
+			pcID = dt.ID
+			break
+		}
+	}
+	if pcID == 0 {
+		t.Fatal("PC not in catalog")
+	}
+	if _, err := s.CreateDevice(p.ID, DeviceCreate{
+		Name: "Workstation", TypeID: &pcID,
+		X: 0, Y: 0, Width: 100, Height: 35,
+	}); err != nil {
+		t.Fatalf("create: %v", err)
+	}
+	ports, _ := s.ListPortsForProject(p.ID)
+	if len(ports) != 5 {
+		t.Errorf("port count = %d, want 5 (Power+RJ45+HDMI+USB×2)", len(ports))
+	}
+	// USB×2 must produce two labels "USB 1" and "USB 2".
+	usbLabels := map[string]bool{}
+	for _, prt := range ports {
+		if prt.Label != nil && (*prt.Label == "USB 1" || *prt.Label == "USB 2") {
+			usbLabels[*prt.Label] = true
+		}
+	}
+	if !usbLabels["USB 1"] || !usbLabels["USB 2"] {
+		t.Errorf("USB labels missing: got %v", usbLabels)
+	}
+}
+
+func TestCreateDevice_NoTypeID_NoPorts(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	if _, err := s.CreateDevice(p.ID, DeviceCreate{
+		Name: "Freeform", X: 0, Y: 0, Width: 100, Height: 35,
+	}); err != nil {
+		t.Fatalf("create: %v", err)
+	}
+	ports, _ := s.ListPortsForProject(p.ID)
+	if len(ports) != 0 {
+		t.Errorf("freeform device should have 0 ports, got %d", len(ports))
+	}
+}
+
+func TestCreateDevice_CrossProjectCustomTypeRejected(t *testing.T) {
+	s := newTestStore(t)
+	p1, _ := s.CreateProject("LOFT", "", "")
+	p2, _ := s.CreateProject("OFFICE", "", "")
+	custom, _ := s.CreateDeviceType(p1.ID, DeviceTypeCreate{Name: "Exotic"})
+	_, err := s.CreateDevice(p2.ID, DeviceCreate{
+		Name: "Wrong", TypeID: &custom.ID,
+		X: 0, Y: 0, Width: 100, Height: 35,
+	})
+	if !errors.Is(err, ErrInvalidInput) {
+		t.Errorf("err = %v, want ErrInvalidInput (cross-project custom type)", err)
+	}
+}
+
+func TestSnapshot_IncludesPorts(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	all, _ := s.ListBuiltInDeviceTypes()
+	for _, dt := range all {
+		if dt.Name == "Mac" {
+			_, _ = s.CreateDevice(p.ID, DeviceCreate{
+				Name: "M1", TypeID: &dt.ID,
+				X: 0, Y: 0, Width: 100, Height: 35,
+			})
+			break
+		}
+	}
+	snap, _ := s.Snapshot(p.ID)
+	if len(snap.Ports) != 4 {
+		t.Errorf("snapshot.Ports = %d, want 4 (Mac: Power+HDMI+USB×2)", len(snap.Ports))
+	}
+}

internal/db/excalidraw_ids.go

@@ -0,0 +1,63 @@
+package db
+
+import (
+	"database/sql"
+)
+
+// PersistExcalidrawIDs writes the assignments returned by the exporter
+// back onto the corresponding rows. Idempotent: only updates rows whose
+// excalidraw_id is currently NULL (the first export "owns" the id; later
+// exports reuse it so mxdrw's collab cursors / undo history survive).
+//
+// Caller passes one map per kind; keys are the in-project row ids,
+// values are the 21-char Excalidraw element ids the exporter minted.
+func (s *Store) PersistExcalidrawIDs(projectID int64,
+	frames, devices, ports, ios, cables, clamps map[int64]string,
+) error {
+	tx, err := s.db.Begin()
+	if err != nil {
+		return err
+	}
+	defer tx.Rollback()
+
+	if err := updateExIDs(tx, "frames", projectID, frames); err != nil {
+		return err
+	}
+	if err := updateExIDs(tx, "devices", projectID, devices); err != nil {
+		return err
+	}
+	if err := updateExIDs(tx, "ports", projectID, ports); err != nil {
+		return err
+	}
+	if err := updateExIDs(tx, "io_markers", projectID, ios); err != nil {
+		return err
+	}
+	if err := updateExIDs(tx, "cables", projectID, cables); err != nil {
+		return err
+	}
+	if err := updateExIDs(tx, "clamps", projectID, clamps); err != nil {
+		return err
+	}
+	return tx.Commit()
+}
+
+func updateExIDs(tx *sql.Tx, table string, projectID int64, m map[int64]string) error {
+	if len(m) == 0 {
+		return nil
+	}
+	stmt, err := tx.Prepare(
+		`UPDATE ` + table + `
+		 SET excalidraw_id = ?
+		 WHERE id = ? AND project_id = ? AND excalidraw_id IS NULL`,
+	)
+	if err != nil {
+		return err
+	}
+	defer stmt.Close()
+	for id, exID := range m {
+		if _, err := stmt.Exec(exID, id, projectID); err != nil {
+			return err
+		}
+	}
+	return nil
+}

internal/db/frames_devices.go

@@ -166,9 +166,14 @@ func (s *Store) DeleteFrame(projectID, id int64) error {
 // -----------------------------------------------------------------------------
 
 // DeviceCreate is the create-shape. FrameID may be nil ("outside any frame").
+// TypeID may be nil for a freeform device (no auto-seeded ports). If set,
+// the type must be either built-in or a project-custom type belonging to
+// the same project — and CreateDevice seeds the device's ports from the
+// type's port profile in the same transaction.
 type DeviceCreate struct {
 	Name    string
 	FrameID *int64
+	TypeID  *int64
 	Color   string
 	X       float64
 	Y       float64
@@ -179,10 +184,11 @@ type DeviceCreate struct {
 // DeviceUpdate is the partial-update shape. project_id deliberately not
 // settable. FrameID is *(*int64) so callers can distinguish "leave as-is"
 // (nil) from "set to NULL" (&nil) — Go syntax: pass a *(*int64) where the
-// inner pointer is nil to clear.
+// inner pointer is nil to clear. TypeID uses the same FrameRef tri-state.
 type DeviceUpdate struct {
 	Name      *string
 	FrameID   FrameRef // see FrameRef below
+	TypeID    FrameRef // tri-state for type_id: same shape as FrameRef
 	Color     *string
 	X         *float64
 	Y         *float64
@@ -201,7 +207,11 @@ type FrameRef struct {
 }
 
 // CreateDevice inserts a new device. FrameID, if provided, must reference
-// a frame in the same project.
+// a frame in the same project. TypeID, if provided, must reference a
+// built-in or a project-custom device_type in the same project — the
+// store seeds the device's ports from that type's profile in the same
+// transaction so a half-created device (row inserted, ports missing)
+// can never exist.
 func (s *Store) CreateDevice(projectID int64, d DeviceCreate) (*Device, error) {
 	name := strings.TrimSpace(d.Name)
 	if name == "" {
@@ -221,32 +231,62 @@ func (s *Store) CreateDevice(projectID int64, d DeviceCreate) (*Device, error) {
 			return nil, err
 		}
 	}
+	if d.TypeID != nil {
+		dt, err := s.GetDeviceType(*d.TypeID)
+		if err != nil {
+			if errors.Is(err, ErrNotFound) {
+				return nil, fmt.Errorf("%w: device type %d not found", ErrInvalidInput, *d.TypeID)
+			}
+			return nil, err
+		}
+		// Project-custom types must match the device's project. Built-ins
+		// (project_id NULL) are available to every project.
+		if dt.ProjectID != nil && *dt.ProjectID != projectID {
+			return nil, fmt.Errorf("%w: device type %d is custom to another project", ErrInvalidInput, *d.TypeID)
+		}
+	}
 	color := strings.TrimSpace(d.Color)
 	if color == "" {
 		color = "#1e1e1e"
 	}
 
-	res, err := s.db.Exec(
-		`INSERT INTO devices (project_id, frame_id, name, color, x, y, width, height)
-		 VALUES (?, ?, ?, ?, ?, ?, ?, ?)`,
-		projectID, nullableInt64(d.FrameID), name, color, d.X, d.Y, d.Width, d.Height,
+	tx, err := s.db.Begin()
+	if err != nil {
+		return nil, err
+	}
+	defer tx.Rollback()
+
+	res, err := tx.Exec(
+		`INSERT INTO devices (project_id, frame_id, type_id, name, color, x, y, width, height)
+		 VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?)`,
+		projectID, nullableInt64(d.FrameID), nullableInt64(d.TypeID),
+		name, color, d.X, d.Y, d.Width, d.Height,
 	)
 	if err != nil {
 		return nil, mapWriteErr(err)
 	}
-	id, _ := res.LastInsertId()
-	return s.GetDevice(projectID, id)
+	deviceID, _ := res.LastInsertId()
+
+	if d.TypeID != nil {
+		if err := s.seedPortsFromType(tx, projectID, deviceID, *d.TypeID, d.Width, d.Height); err != nil {
+			return nil, err
+		}
+	}
+	if err := tx.Commit(); err != nil {
+		return nil, err
+	}
+	return s.GetDevice(projectID, deviceID)
 }
 
 // GetDevice loads a device, project-scoped.
 func (s *Store) GetDevice(projectID, id int64) (*Device, error) {
 	var d Device
-	var frame sql.NullInt64
+	var frame, typeID sql.NullInt64
 	var ex sql.NullString
 	err := s.db.QueryRow(
-		`SELECT id, project_id, frame_id, name, color, x, y, width, height, excalidraw_id, created_at, updated_at
+		`SELECT id, project_id, frame_id, type_id, name, color, x, y, width, height, excalidraw_id, created_at, updated_at
 		 FROM devices WHERE id = ? AND project_id = ?`, id, projectID,
-	).Scan(&d.ID, &d.ProjectID, &frame, &d.Name, &d.Color, &d.X, &d.Y, &d.Width, &d.Height,
+	).Scan(&d.ID, &d.ProjectID, &frame, &typeID, &d.Name, &d.Color, &d.X, &d.Y, &d.Width, &d.Height,
 		&ex, &d.CreatedAt, &d.UpdatedAt)
 	if errors.Is(err, sql.ErrNoRows) {
 		return nil, ErrNotFound
@@ -258,6 +298,10 @@ func (s *Store) GetDevice(projectID, id int64) (*Device, error) {
 		v := frame.Int64
 		d.FrameID = &v
 	}
+	if typeID.Valid {
+		v := typeID.Int64
+		d.TypeID = &v
+	}
 	if ex.Valid {
 		d.ExcalidrawID = &ex.String
 	}
@@ -277,13 +321,13 @@ func (s *Store) ListDevices(projectID int64, frameID *int64) ([]Device, error) {
 	)
 	if frameID != nil {
 		rows, err = s.db.Query(
-			`SELECT id, project_id, frame_id, name, color, x, y, width, height, excalidraw_id, created_at, updated_at
+			`SELECT id, project_id, frame_id, type_id, name, color, x, y, width, height, excalidraw_id, created_at, updated_at
 			 FROM devices WHERE project_id = ? AND frame_id = ? ORDER BY created_at, id`,
 			projectID, *frameID,
 		)
 	} else {
 		rows, err = s.db.Query(
-			`SELECT id, project_id, frame_id, name, color, x, y, width, height, excalidraw_id, created_at, updated_at
+			`SELECT id, project_id, frame_id, type_id, name, color, x, y, width, height, excalidraw_id, created_at, updated_at
 			 FROM devices WHERE project_id = ? ORDER BY created_at, id`,
 			projectID,
 		)
@@ -295,9 +339,9 @@ func (s *Store) ListDevices(projectID int64, frameID *int64) ([]Device, error) {
 	out := []Device{}
 	for rows.Next() {
 		var d Device
-		var frame sql.NullInt64
+		var frame, typeID sql.NullInt64
 		var ex sql.NullString
-		if err := rows.Scan(&d.ID, &d.ProjectID, &frame, &d.Name, &d.Color, &d.X, &d.Y, &d.Width, &d.Height,
+		if err := rows.Scan(&d.ID, &d.ProjectID, &frame, &typeID, &d.Name, &d.Color, &d.X, &d.Y, &d.Width, &d.Height,
 			&ex, &d.CreatedAt, &d.UpdatedAt); err != nil {
 			return nil, err
 		}
@@ -305,6 +349,10 @@ func (s *Store) ListDevices(projectID int64, frameID *int64) ([]Device, error) {
 			v := frame.Int64
 			d.FrameID = &v
 		}
+		if typeID.Valid {
+			v := typeID.Int64
+			d.TypeID = &v
+		}
 		if ex.Valid {
 			d.ExcalidrawID = &ex.String
 		}
@@ -363,11 +411,27 @@ func (s *Store) UpdateDevice(projectID, id int64, u DeviceUpdate) (*Device, erro
 		}
 		cur.FrameID = u.FrameID.ID
 	}
+	if u.TypeID.Set {
+		if u.TypeID.ID != nil {
+			dt, err := s.GetDeviceType(*u.TypeID.ID)
+			if err != nil {
+				if errors.Is(err, ErrNotFound) {
+					return nil, fmt.Errorf("%w: device type %d not found", ErrInvalidInput, *u.TypeID.ID)
+				}
+				return nil, err
+			}
+			if dt.ProjectID != nil && *dt.ProjectID != projectID {
+				return nil, fmt.Errorf("%w: device type %d is custom to another project", ErrInvalidInput, *u.TypeID.ID)
+			}
+		}
+		cur.TypeID = u.TypeID.ID
+	}
 	if _, err := s.db.Exec(
 		`UPDATE devices
-		 SET frame_id = ?, name = ?, color = ?, x = ?, y = ?, width = ?, height = ?, updated_at = datetime('now')
+		 SET frame_id = ?, type_id = ?, name = ?, color = ?, x = ?, y = ?, width = ?, height = ?, updated_at = datetime('now')
 		 WHERE id = ? AND project_id = ?`,
-		nullableInt64(cur.FrameID), cur.Name, cur.Color, cur.X, cur.Y, cur.Width, cur.Height, id, projectID,
+		nullableInt64(cur.FrameID), nullableInt64(cur.TypeID),
+		cur.Name, cur.Color, cur.X, cur.Y, cur.Width, cur.Height, id, projectID,
 	); err != nil {
 		return nil, mapWriteErr(err)
 	}

internal/db/io_markers.go

@@ -0,0 +1,180 @@
+package db
+
+import (
+	"database/sql"
+	"errors"
+	"fmt"
+	"strings"
+)
+
+// IOMarker is a wall-outlet terminator inside a project. Mostly Power
+// by convention; the schema doesn't enforce it.
+type IOMarker struct {
+	ID            int64   `json:"id"`
+	ProjectID     int64   `json:"project_id"`
+	FrameID       *int64  `json:"frame_id"`
+	Label         string  `json:"label"`
+	X             float64 `json:"x"`
+	Y             float64 `json:"y"`
+	ExcalidrawID  *string `json:"excalidraw_id,omitempty"`
+	CreatedAt     string  `json:"created_at"`
+	UpdatedAt     string  `json:"updated_at"`
+}
+
+// IOMarkerCreate is the create-shape.
+type IOMarkerCreate struct {
+	FrameID *int64
+	Label   string
+	X       float64
+	Y       float64
+}
+
+// IOMarkerUpdate is the partial-update shape. project_id deliberately not
+// settable; frame_id uses the same tri-state shape as DeviceUpdate.FrameID.
+type IOMarkerUpdate struct {
+	Label   *string
+	FrameID FrameRef
+	X       *float64
+	Y       *float64
+}
+
+// CreateIOMarker inserts a new IO marker. If frame_id is set, it must
+// reference a frame in the same project.
+func (s *Store) CreateIOMarker(projectID int64, m IOMarkerCreate) (*IOMarker, error) {
+	label := strings.TrimSpace(m.Label)
+	if label == "" {
+		label = "IO"
+	}
+	if _, err := s.GetProject(projectID); err != nil {
+		return nil, err
+	}
+	if m.FrameID != nil {
+		if _, err := s.GetFrame(projectID, *m.FrameID); err != nil {
+			if errors.Is(err, ErrNotFound) {
+				return nil, fmt.Errorf("%w: frame_id %d not in project %d", ErrInvalidInput, *m.FrameID, projectID)
+			}
+			return nil, err
+		}
+	}
+	res, err := s.db.Exec(
+		`INSERT INTO io_markers (project_id, frame_id, label, x, y)
+		 VALUES (?, ?, ?, ?, ?)`,
+		projectID, nullableInt64(m.FrameID), label, m.X, m.Y,
+	)
+	if err != nil {
+		return nil, mapWriteErr(err)
+	}
+	id, _ := res.LastInsertId()
+	return s.GetIOMarker(projectID, id)
+}
+
+// GetIOMarker loads an IO marker, project-scoped.
+func (s *Store) GetIOMarker(projectID, id int64) (*IOMarker, error) {
+	var m IOMarker
+	var frame sql.NullInt64
+	var ex sql.NullString
+	err := s.db.QueryRow(
+		`SELECT id, project_id, frame_id, label, x, y, excalidraw_id, created_at, updated_at
+		 FROM io_markers WHERE id = ? AND project_id = ?`, id, projectID,
+	).Scan(&m.ID, &m.ProjectID, &frame, &m.Label, &m.X, &m.Y, &ex, &m.CreatedAt, &m.UpdatedAt)
+	if errors.Is(err, sql.ErrNoRows) {
+		return nil, ErrNotFound
+	}
+	if err != nil {
+		return nil, err
+	}
+	if frame.Valid {
+		v := frame.Int64
+		m.FrameID = &v
+	}
+	if ex.Valid {
+		m.ExcalidrawID = &ex.String
+	}
+	return &m, nil
+}
+
+// ListIOMarkers returns every IO marker in a project, ordered by creation.
+func (s *Store) ListIOMarkers(projectID int64) ([]IOMarker, error) {
+	rows, err := s.db.Query(
+		`SELECT id, project_id, frame_id, label, x, y, excalidraw_id, created_at, updated_at
+		 FROM io_markers WHERE project_id = ? ORDER BY created_at, id`, projectID,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []IOMarker{}
+	for rows.Next() {
+		var m IOMarker
+		var frame sql.NullInt64
+		var ex sql.NullString
+		if err := rows.Scan(&m.ID, &m.ProjectID, &frame, &m.Label, &m.X, &m.Y,
+			&ex, &m.CreatedAt, &m.UpdatedAt); err != nil {
+			return nil, err
+		}
+		if frame.Valid {
+			v := frame.Int64
+			m.FrameID = &v
+		}
+		if ex.Valid {
+			m.ExcalidrawID = &ex.String
+		}
+		out = append(out, m)
+	}
+	return out, rows.Err()
+}
+
+// UpdateIOMarker applies a partial update. project_id is locked; frame_id
+// tri-state mirrors DeviceUpdate.FrameID.
+func (s *Store) UpdateIOMarker(projectID, id int64, u IOMarkerUpdate) (*IOMarker, error) {
+	cur, err := s.GetIOMarker(projectID, id)
+	if err != nil {
+		return nil, err
+	}
+	if u.Label != nil {
+		v := strings.TrimSpace(*u.Label)
+		if v == "" {
+			return nil, fmt.Errorf("%w: label cannot be empty", ErrInvalidInput)
+		}
+		cur.Label = v
+	}
+	if u.X != nil {
+		cur.X = *u.X
+	}
+	if u.Y != nil {
+		cur.Y = *u.Y
+	}
+	if u.FrameID.Set {
+		if u.FrameID.ID != nil {
+			if _, err := s.GetFrame(projectID, *u.FrameID.ID); err != nil {
+				if errors.Is(err, ErrNotFound) {
+					return nil, fmt.Errorf("%w: frame_id %d not in project %d", ErrInvalidInput, *u.FrameID.ID, projectID)
+				}
+				return nil, err
+			}
+		}
+		cur.FrameID = u.FrameID.ID
+	}
+	if _, err := s.db.Exec(
+		`UPDATE io_markers
+		 SET frame_id = ?, label = ?, x = ?, y = ?, updated_at = datetime('now')
+		 WHERE id = ? AND project_id = ?`,
+		nullableInt64(cur.FrameID), cur.Label, cur.X, cur.Y, id, projectID,
+	); err != nil {
+		return nil, mapWriteErr(err)
+	}
+	return s.GetIOMarker(projectID, id)
+}
+
+// DeleteIOMarker removes an IO marker from a project.
+func (s *Store) DeleteIOMarker(projectID, id int64) error {
+	if _, err := s.GetIOMarker(projectID, id); err != nil {
+		return err
+	}
+	if _, err := s.db.Exec(
+		`DELETE FROM io_markers WHERE id = ? AND project_id = ?`, id, projectID,
+	); err != nil {
+		return err
+	}
+	return nil
+}

internal/db/io_markers_test.go

@@ -0,0 +1,113 @@
+package db
+
+import (
+	"errors"
+	"testing"
+)
+
+func TestCreateIOMarker_DefaultsLabel(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	m, err := s.CreateIOMarker(p.ID, IOMarkerCreate{X: 10, Y: 20})
+	if err != nil {
+		t.Fatalf("create: %v", err)
+	}
+	if m.Label != "IO" {
+		t.Errorf("default label = %q, want IO", m.Label)
+	}
+	if m.FrameID != nil {
+		t.Errorf("frame_id = %v, want nil", m.FrameID)
+	}
+}
+
+func TestCreateIOMarker_CustomLabel(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	m, err := s.CreateIOMarker(p.ID, IOMarkerCreate{Label: "Wall A", X: 0, Y: 0})
+	if err != nil {
+		t.Fatalf("create: %v", err)
+	}
+	if m.Label != "Wall A" {
+		t.Errorf("label = %q, want Wall A", m.Label)
+	}
+}
+
+func TestCreateIOMarker_CrossProjectFrameRejected(t *testing.T) {
+	s := newTestStore(t)
+	p1, _ := s.CreateProject("LOFT", "", "")
+	p2, _ := s.CreateProject("OFFICE", "", "")
+	f2, _ := s.CreateFrame(p2.ID, FrameCreate{Name: "desk", Width: 100, Height: 50})
+	_, err := s.CreateIOMarker(p1.ID, IOMarkerCreate{FrameID: &f2.ID, X: 0, Y: 0})
+	if !errors.Is(err, ErrInvalidInput) {
+		t.Errorf("cross-project frame_id should ErrInvalidInput; got %v", err)
+	}
+}
+
+func TestGetIOMarker_WrongProjectIsNotFound(t *testing.T) {
+	s := newTestStore(t)
+	p1, _ := s.CreateProject("LOFT", "", "")
+	p2, _ := s.CreateProject("OFFICE", "", "")
+	m, _ := s.CreateIOMarker(p1.ID, IOMarkerCreate{X: 0, Y: 0})
+	if _, err := s.GetIOMarker(p2.ID, m.ID); !errors.Is(err, ErrNotFound) {
+		t.Errorf("cross-project GetIOMarker should be ErrNotFound; got %v", err)
+	}
+}
+
+func TestUpdateIOMarker_FrameIDTriState(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	f, _ := s.CreateFrame(p.ID, FrameCreate{Name: "desk", Width: 100, Height: 50})
+	m, _ := s.CreateIOMarker(p.ID, IOMarkerCreate{FrameID: &f.ID, X: 0, Y: 0})
+
+	// Leave alone — passing a different X must not clear frame_id.
+	nx := 99.0
+	u1, _ := s.UpdateIOMarker(p.ID, m.ID, IOMarkerUpdate{X: &nx})
+	if u1.FrameID == nil || *u1.FrameID != f.ID {
+		t.Errorf("frame_id should still be set (Set=false); got %v", u1.FrameID)
+	}
+
+	// Clear.
+	u2, _ := s.UpdateIOMarker(p.ID, m.ID, IOMarkerUpdate{FrameID: FrameRef{Set: true, ID: nil}})
+	if u2.FrameID != nil {
+		t.Errorf("frame_id should be nil after clear; got %v", *u2.FrameID)
+	}
+}
+
+func TestDeleteFrame_SetsIOMarkerFrameIDToNull(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	f, _ := s.CreateFrame(p.ID, FrameCreate{Name: "desk", Width: 800, Height: 600})
+	m, _ := s.CreateIOMarker(p.ID, IOMarkerCreate{FrameID: &f.ID, X: 10, Y: 20})
+	if m.FrameID == nil {
+		t.Fatalf("pre-condition: io marker should have frame_id")
+	}
+	if err := s.DeleteFrame(p.ID, f.ID); err != nil {
+		t.Fatalf("delete frame: %v", err)
+	}
+	m2, _ := s.GetIOMarker(p.ID, m.ID)
+	if m2.FrameID != nil {
+		t.Errorf("io marker frame_id post-delete = %v, want nil (SET NULL)", m2.FrameID)
+	}
+}
+
+func TestSnapshot_PopulatesIOMarkers(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	_, _ = s.CreateIOMarker(p.ID, IOMarkerCreate{Label: "Wall A", X: 10, Y: 20})
+	_, _ = s.CreateIOMarker(p.ID, IOMarkerCreate{Label: "UPS rear", X: 100, Y: 200})
+	snap, err := s.Snapshot(p.ID)
+	if err != nil {
+		t.Fatalf("snapshot: %v", err)
+	}
+	if len(snap.IOMarkers) != 2 {
+		t.Errorf("io_markers len = %d, want 2", len(snap.IOMarkers))
+	}
+}
+
+func TestDeleteIOMarker_NotFound(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	if err := s.DeleteIOMarker(p.ID, 999); !errors.Is(err, ErrNotFound) {
+		t.Errorf("got %v, want ErrNotFound", err)
+	}
+}

internal/db/migrations/001_init.sql

@@ -1,4 +1,4 @@
--- mCables v3 initial schema. See docs/design.md §2.
+-- CableGUI v3 initial schema. See docs/design.md §2.
 
 -- A project IS a drawing. LOFT and OFFICE are separate projects.
 -- One project ↔ one .excalidraw file in mExDraw.

internal/db/migrations/002_device_catalog.sql

@@ -0,0 +1,167 @@
+-- CableGUI v4 device-type catalog. See docs/design.md §2.1 + §2.2.
+
+-- v4 — device-type catalog. Built-in types live globally (project_id NULL).
+-- Per-project custom types use project_id = X.
+CREATE TABLE device_types (
+    id              INTEGER PRIMARY KEY,
+    project_id      INTEGER REFERENCES projects(id) ON DELETE CASCADE,
+    name            TEXT NOT NULL,
+    kind            TEXT NOT NULL DEFAULT 'generic',
+    icon            TEXT,
+    description     TEXT NOT NULL DEFAULT '',
+    built_in        INTEGER NOT NULL DEFAULT 0,
+    created_at      TEXT NOT NULL DEFAULT (datetime('now')),
+    updated_at      TEXT NOT NULL DEFAULT (datetime('now')),
+    UNIQUE (project_id, name)
+);
+CREATE INDEX device_types_project_idx ON device_types(project_id);
+
+-- v4 — port profile per device type. Used to seed ports when a device
+-- of that type is created.
+CREATE TABLE device_type_ports (
+    id              INTEGER PRIMARY KEY,
+    device_type_id  INTEGER NOT NULL REFERENCES device_types(id) ON DELETE CASCADE,
+    cable_type_id   INTEGER NOT NULL REFERENCES cable_types(id)  ON DELETE RESTRICT,
+    label_prefix    TEXT NOT NULL DEFAULT '',
+    count           INTEGER NOT NULL DEFAULT 1 CHECK (count >= 1),
+    edge            TEXT NOT NULL DEFAULT 'bottom' CHECK (edge IN ('top','bottom','left','right')),
+    sort_order      INTEGER NOT NULL DEFAULT 0
+);
+CREATE INDEX device_type_ports_type_idx ON device_type_ports(device_type_id);
+
+-- v4 — devices gain a nullable type_id. SET NULL on type-delete so we
+-- never cascade-delete a device the user still wants.
+ALTER TABLE devices ADD COLUMN type_id INTEGER
+    REFERENCES device_types(id) ON DELETE SET NULL;
+CREATE INDEX devices_type_idx ON devices(type_id);
+
+-- Seed the 14 built-in device types.
+-- project_id stays NULL → built-in. The trio Screen / Keyboard / Mouse
+-- was added in v4.1 to support the Home Office setup template (slice 6).
+INSERT INTO device_types (name, kind, built_in, description) VALUES
+    ('NAS',        'storage',   1, 'Network-attached storage'),
+    ('PC',         'compute',   1, 'Desktop PC / workstation'),
+    ('Mac',        'compute',   1, 'Mac (mini / studio / desktop)'),
+    ('Notebook',   'compute',   1, 'Laptop / notebook'),
+    ('TV',         'display',   1, 'Television'),
+    ('Soundbar',   'audio',     1, 'Soundbar / AV receiver'),
+    ('Switch',     'network',   1, 'Ethernet switch'),
+    ('fritz',      'network',   1, 'AVM Fritz!Box router'),
+    ('ChromeCast', 'display',   1, 'ChromeCast / streaming stick'),
+    ('SteamLink',  'compute',   1, 'Steam Link / dedicated streaming box'),
+    ('IOx-3',      'hub',       1, 'USB hub with 3 downstream ports'),
+    ('IOx-6',      'hub',       1, 'USB hub with 6 downstream ports'),
+    ('IOx-8',      'hub',       1, 'USB hub with 8 downstream ports'),
+    ('Screen',     'display',   1, 'External monitor / display'),
+    ('Keyboard',   'accessory', 1, 'Keyboard'),
+    ('Mouse',      'accessory', 1, 'Mouse / pointing device');
+
+-- Now seed device_type_ports. Each row references its device_type by
+-- (SELECT id FROM device_types WHERE name = ? AND project_id IS NULL).
+--
+-- cable_types ids come from the 001 seed in fixed order:
+--   1=Power, 2=USB, 3=HDMI, 4=DP, 5=RJ45
+--
+-- label_prefix is what the seeder appends a 1..N suffix to when count>1.
+-- Default edge is 'bottom'; sort_order positions the port-types from
+-- left to right along that edge.
+
+-- NAS: Power × 1, RJ45 × 1
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='NAS' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 5, 'RJ45',  1, 'bottom', 1 FROM device_types WHERE name='NAS' AND project_id IS NULL;
+
+-- PC: Power × 1, RJ45 × 1, HDMI × 1, USB × 2
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='PC' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 5, 'RJ45',  1, 'bottom', 1 FROM device_types WHERE name='PC' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 3, 'HDMI',  1, 'bottom', 2 FROM device_types WHERE name='PC' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 2, 'USB',   2, 'bottom', 3 FROM device_types WHERE name='PC' AND project_id IS NULL;
+
+-- Mac: Power × 1, HDMI × 1, USB × 2
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='Mac' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 3, 'HDMI',  1, 'bottom', 1 FROM device_types WHERE name='Mac' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 2, 'USB',   2, 'bottom', 2 FROM device_types WHERE name='Mac' AND project_id IS NULL;
+
+-- Notebook: Power × 1, USB × 2
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='Notebook' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 2, 'USB',   2, 'bottom', 1 FROM device_types WHERE name='Notebook' AND project_id IS NULL;
+
+-- TV: Power × 1, HDMI × 2
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='TV' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 3, 'HDMI',  2, 'bottom', 1 FROM device_types WHERE name='TV' AND project_id IS NULL;
+
+-- Soundbar: Power × 1, HDMI × 1
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='Soundbar' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 3, 'HDMI',  1, 'bottom', 1 FROM device_types WHERE name='Soundbar' AND project_id IS NULL;
+
+-- Switch: Power × 1, RJ45 × 5
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='Switch' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 5, 'RJ45',  5, 'bottom', 1 FROM device_types WHERE name='Switch' AND project_id IS NULL;
+
+-- fritz: Power × 1, RJ45 × 4
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='fritz' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 5, 'RJ45',  4, 'bottom', 1 FROM device_types WHERE name='fritz' AND project_id IS NULL;
+
+-- ChromeCast: Power × 1, HDMI × 1
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='ChromeCast' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 3, 'HDMI',  1, 'bottom', 1 FROM device_types WHERE name='ChromeCast' AND project_id IS NULL;
+
+-- SteamLink: Power × 1, HDMI × 1, USB × 2
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='SteamLink' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 3, 'HDMI',  1, 'bottom', 1 FROM device_types WHERE name='SteamLink' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 2, 'USB',   2, 'bottom', 2 FROM device_types WHERE name='SteamLink' AND project_id IS NULL;
+
+-- IOx-3: Power × 1, USB × 3
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='IOx-3' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 2, 'USB',   3, 'bottom', 1 FROM device_types WHERE name='IOx-3' AND project_id IS NULL;
+
+-- IOx-6: Power × 1, USB × 6
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='IOx-6' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 2, 'USB',   6, 'bottom', 1 FROM device_types WHERE name='IOx-6' AND project_id IS NULL;
+
+-- IOx-8: Power × 1, USB × 8
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='IOx-8' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 2, 'USB',   8, 'bottom', 1 FROM device_types WHERE name='IOx-8' AND project_id IS NULL;
+
+-- Screen: Power × 1, HDMI × 1 (v4.1)
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 1, 'bottom', 0 FROM device_types WHERE name='Screen' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 3, 'HDMI',  1, 'bottom', 1 FROM device_types WHERE name='Screen' AND project_id IS NULL;
+
+-- Keyboard: USB × 1 (v4.1)
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 2, 'USB',   1, 'bottom', 0 FROM device_types WHERE name='Keyboard' AND project_id IS NULL;
+
+-- Mouse: USB × 1 (v4.1)
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 2, 'USB',   1, 'bottom', 0 FROM device_types WHERE name='Mouse' AND project_id IS NULL;

internal/db/migrations/003_connection_requirements.sql

@@ -0,0 +1,34 @@
+-- CableGUI v4.1 connection requirements + solver-owned cable flag.
+-- See docs/design.md §2.1 + §2 connection_requirements + §5b.3.
+
+-- The solver's input: "device A must connect to device B via cable type T".
+-- Many per device. (from, to) is normalised on insert as
+-- (pair_lo, pair_hi) = (MIN(from, to), MAX(from, to)) so (A,B,T) and (B,A,T)
+-- can't coexist (UNIQUE enforces it).
+CREATE TABLE connection_requirements (
+    id                       INTEGER PRIMARY KEY,
+    project_id               INTEGER NOT NULL REFERENCES projects(id) ON DELETE CASCADE,
+    from_device_id           INTEGER NOT NULL REFERENCES devices(id) ON DELETE CASCADE,
+    to_device_id             INTEGER NOT NULL REFERENCES devices(id) ON DELETE CASCADE,
+    preferred_cable_type_id  INTEGER REFERENCES cable_types(id) ON DELETE SET NULL,
+    must_connect             INTEGER NOT NULL DEFAULT 1 CHECK (must_connect IN (0, 1)),
+    notes                    TEXT NOT NULL DEFAULT '',
+    pair_lo                  INTEGER NOT NULL,
+    pair_hi                  INTEGER NOT NULL,
+    created_at               TEXT NOT NULL DEFAULT (datetime('now')),
+    updated_at               TEXT NOT NULL DEFAULT (datetime('now')),
+    CHECK (from_device_id != to_device_id),
+    UNIQUE (project_id, pair_lo, pair_hi, preferred_cable_type_id)
+);
+CREATE INDEX conn_reqs_project_idx ON connection_requirements(project_id);
+CREATE INDEX conn_reqs_pair_idx    ON connection_requirements(project_id, pair_lo, pair_hi);
+CREATE INDEX conn_reqs_from_idx    ON connection_requirements(from_device_id);
+CREATE INDEX conn_reqs_to_idx      ON connection_requirements(to_device_id);
+
+-- Solver-owned cable flag (§5b.3): 1 = the solver placed this cable,
+-- replaceable on re-solve. 0 = m hand-drew it, left alone by the solver.
+-- Slice 6 ships the solver that writes auto=1; slice 7 ships hand-drawn
+-- cable creation that writes auto=0.
+ALTER TABLE cables ADD COLUMN auto INTEGER NOT NULL DEFAULT 0
+    CHECK (auto IN (0, 1));
+CREATE INDEX cables_auto_idx ON cables(auto);

internal/db/migrations/004_setup_templates.sql

@@ -0,0 +1,157 @@
+-- CableGUI v4.1 setup templates. See docs/design.md §2.4.
+--
+-- A template is a named recipe of (device_types + requirements) that
+-- bootstraps a project from blank to solver-ready in one apply call.
+
+CREATE TABLE setup_templates (
+    id              INTEGER PRIMARY KEY,
+    name            TEXT NOT NULL UNIQUE,
+    description     TEXT NOT NULL DEFAULT '',
+    built_in        INTEGER NOT NULL DEFAULT 0,
+    created_at      TEXT NOT NULL DEFAULT (datetime('now')),
+    updated_at      TEXT NOT NULL DEFAULT (datetime('now'))
+);
+
+CREATE TABLE setup_template_devices (
+    id              INTEGER PRIMARY KEY,
+    template_id     INTEGER NOT NULL REFERENCES setup_templates(id) ON DELETE CASCADE,
+    device_type_id  INTEGER NOT NULL REFERENCES device_types(id)    ON DELETE RESTRICT,
+    suggested_name  TEXT,
+    sort_order      INTEGER NOT NULL DEFAULT 0
+);
+CREATE INDEX setup_template_devices_template_idx ON setup_template_devices(template_id);
+
+CREATE TABLE setup_template_requirements (
+    id                       INTEGER PRIMARY KEY,
+    template_id              INTEGER NOT NULL REFERENCES setup_templates(id) ON DELETE CASCADE,
+    from_template_device_id  INTEGER NOT NULL REFERENCES setup_template_devices(id) ON DELETE CASCADE,
+    to_template_device_id    INTEGER NOT NULL REFERENCES setup_template_devices(id) ON DELETE CASCADE,
+    preferred_cable_type_id  INTEGER REFERENCES cable_types(id) ON DELETE SET NULL,
+    must_connect             INTEGER NOT NULL DEFAULT 1 CHECK (must_connect IN (0, 1)),
+    CHECK (from_template_device_id != to_template_device_id)
+);
+CREATE INDEX setup_template_reqs_template_idx ON setup_template_requirements(template_id);
+
+-- ---------------------------------------------------------------- Living Room
+INSERT INTO setup_templates (name, description, built_in)
+    VALUES ('Living Room', 'TV + Soundbar + ChromeCast, HDMI between them.', 1);
+
+INSERT INTO setup_template_devices (template_id, device_type_id, suggested_name, sort_order)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Living Room'),
+        (SELECT id FROM device_types WHERE name='TV' AND project_id IS NULL),
+        'TV', 0;
+INSERT INTO setup_template_devices (template_id, device_type_id, suggested_name, sort_order)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Living Room'),
+        (SELECT id FROM device_types WHERE name='Soundbar' AND project_id IS NULL),
+        'Soundbar', 1;
+INSERT INTO setup_template_devices (template_id, device_type_id, suggested_name, sort_order)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Living Room'),
+        (SELECT id FROM device_types WHERE name='ChromeCast' AND project_id IS NULL),
+        'ChromeCast', 2;
+
+-- TV ↔ Soundbar (HDMI, must)
+INSERT INTO setup_template_requirements
+    (template_id, from_template_device_id, to_template_device_id, preferred_cable_type_id, must_connect)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Living Room'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Living Room') AND suggested_name='TV'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Living Room') AND suggested_name='Soundbar'),
+        3, 1;
+-- TV ↔ ChromeCast (HDMI, must)
+INSERT INTO setup_template_requirements
+    (template_id, from_template_device_id, to_template_device_id, preferred_cable_type_id, must_connect)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Living Room'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Living Room') AND suggested_name='TV'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Living Room') AND suggested_name='ChromeCast'),
+        3, 1;
+
+-- ---------------------------------------------------------------- Home Office
+INSERT INTO setup_templates (name, description, built_in)
+    VALUES ('Home Office', 'PC + Screen + Keyboard + Mouse. HDMI + USB.', 1);
+
+INSERT INTO setup_template_devices (template_id, device_type_id, suggested_name, sort_order)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Home Office'),
+        (SELECT id FROM device_types WHERE name='PC' AND project_id IS NULL),
+        'PC', 0;
+INSERT INTO setup_template_devices (template_id, device_type_id, suggested_name, sort_order)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Home Office'),
+        (SELECT id FROM device_types WHERE name='Screen' AND project_id IS NULL),
+        'Screen', 1;
+INSERT INTO setup_template_devices (template_id, device_type_id, suggested_name, sort_order)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Home Office'),
+        (SELECT id FROM device_types WHERE name='Keyboard' AND project_id IS NULL),
+        'Keyboard', 2;
+INSERT INTO setup_template_devices (template_id, device_type_id, suggested_name, sort_order)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Home Office'),
+        (SELECT id FROM device_types WHERE name='Mouse' AND project_id IS NULL),
+        'Mouse', 3;
+
+-- PC ↔ Screen (HDMI, must)
+INSERT INTO setup_template_requirements
+    (template_id, from_template_device_id, to_template_device_id, preferred_cable_type_id, must_connect)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Home Office'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Home Office') AND suggested_name='PC'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Home Office') AND suggested_name='Screen'),
+        3, 1;
+-- PC ↔ Keyboard (USB, must)
+INSERT INTO setup_template_requirements
+    (template_id, from_template_device_id, to_template_device_id, preferred_cable_type_id, must_connect)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Home Office'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Home Office') AND suggested_name='PC'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Home Office') AND suggested_name='Keyboard'),
+        2, 1;
+-- PC ↔ Mouse (USB, must)
+INSERT INTO setup_template_requirements
+    (template_id, from_template_device_id, to_template_device_id, preferred_cable_type_id, must_connect)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Home Office'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Home Office') AND suggested_name='PC'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Home Office') AND suggested_name='Mouse'),
+        2, 1;
+
+-- ---------------------------------------------------------------- Server Rack
+INSERT INTO setup_templates (name, description, built_in)
+    VALUES ('Server Rack', 'NAS + Switch + fritz. Ethernet trunk + power.', 1);
+
+INSERT INTO setup_template_devices (template_id, device_type_id, suggested_name, sort_order)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Server Rack'),
+        (SELECT id FROM device_types WHERE name='NAS' AND project_id IS NULL),
+        'NAS', 0;
+INSERT INTO setup_template_devices (template_id, device_type_id, suggested_name, sort_order)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Server Rack'),
+        (SELECT id FROM device_types WHERE name='Switch' AND project_id IS NULL),
+        'Switch', 1;
+INSERT INTO setup_template_devices (template_id, device_type_id, suggested_name, sort_order)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Server Rack'),
+        (SELECT id FROM device_types WHERE name='fritz' AND project_id IS NULL),
+        'fritz', 2;
+
+-- NAS ↔ Switch (RJ45, must)
+INSERT INTO setup_template_requirements
+    (template_id, from_template_device_id, to_template_device_id, preferred_cable_type_id, must_connect)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Server Rack'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Server Rack') AND suggested_name='NAS'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Server Rack') AND suggested_name='Switch'),
+        5, 1;
+-- Switch ↔ fritz (RJ45, must)
+INSERT INTO setup_template_requirements
+    (template_id, from_template_device_id, to_template_device_id, preferred_cable_type_id, must_connect)
+    SELECT
+        (SELECT id FROM setup_templates WHERE name='Server Rack'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Server Rack') AND suggested_name='Switch'),
+        (SELECT id FROM setup_template_devices WHERE template_id = (SELECT id FROM setup_templates WHERE name='Server Rack') AND suggested_name='fritz'),
+        5, 1;

internal/db/migrations/005_catalog_power.sql

@@ -0,0 +1,32 @@
+-- CableGUI v5 — catalog: power-distribution devices.
+-- Adds 5 built-in device_types (project_id NULL, built_in=1).
+--
+-- Multi-plug N exposes Power × (N+1) ports — one input + N outputs. The
+-- solver treats every Power port identically regardless of in/out
+-- direction; m knows which end is which from the physical setup.
+--
+-- Wifi-plug is a pass-through outlet (Power × 2: one in, one out).
+
+INSERT INTO device_types (name, kind, icon, built_in, description) VALUES
+    ('Multi-plug 3', 'hub',       '🔌', 1, '3-way power strip (1 in + 3 out)'),
+    ('Multi-plug 4', 'hub',       '🔌', 1, '4-way power strip (1 in + 4 out)'),
+    ('Multi-plug 5', 'hub',       '🔌', 1, '5-way power strip (1 in + 5 out)'),
+    ('Multi-plug 6', 'hub',       '🔌', 1, '6-way power strip (1 in + 6 out)'),
+    ('Wifi-plug',    'accessory', '📶', 1, 'WiFi-controllable pass-through outlet');
+
+-- Port profiles. cable_types id 1 = Power (seeded in 001).
+
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 4, 'bottom', 0 FROM device_types WHERE name='Multi-plug 3' AND project_id IS NULL;
+
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 5, 'bottom', 0 FROM device_types WHERE name='Multi-plug 4' AND project_id IS NULL;
+
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 6, 'bottom', 0 FROM device_types WHERE name='Multi-plug 5' AND project_id IS NULL;
+
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 7, 'bottom', 0 FROM device_types WHERE name='Multi-plug 6' AND project_id IS NULL;
+
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power', 2, 'bottom', 0 FROM device_types WHERE name='Wifi-plug' AND project_id IS NULL;

internal/db/migrations/006_fix_power_hubs.sql

@@ -0,0 +1,87 @@
+-- CableGUI v6 — fix IOx-* and Multi-plug-* + Wifi-plug port profiles.
+--
+-- v4 seeded the IOx-3 / IOx-6 / IOx-8 as USB hubs (Power × 1 + USB × N),
+-- but m's physical IOx-* devices are power strips (1 power input on
+-- the back, N power outputs on the front). v5's Multi-plug 3/4/5/6
+-- profiles also lumped every Power port on the bottom edge without
+-- distinguishing the input from the outputs.
+--
+-- This migration replaces the port profile for the 8 power-distribution
+-- types with the canonical "1 in (top/back) + N out (bottom/front)"
+-- layout. Convention: top=back, bottom=front.
+--
+-- N for each type:
+--   IOx-3 / Multi-plug 3 → 3 outputs
+--   IOx-6                 → 6 outputs
+--   IOx-8                 → 8 outputs
+--   Multi-plug 4          → 4 outputs
+--   Multi-plug 5          → 5 outputs
+--   Multi-plug 6          → 6 outputs
+--   Wifi-plug             → 1 output (it's a pass-through outlet)
+--
+-- Existing devices m may have created with the old profile keep their
+-- already-seeded ports — per design §2.3, ports are instance-owned. To
+-- get the new layout on an existing instance, delete it and re-create.
+--
+-- cable_types id 1 = Power (seeded in 001).
+
+-- 1) Drop the existing port-profile rows for each affected type.
+DELETE FROM device_type_ports
+ WHERE device_type_id IN (
+     SELECT id FROM device_types
+      WHERE project_id IS NULL
+        AND name IN (
+            'IOx-3', 'IOx-6', 'IOx-8',
+            'Multi-plug 3', 'Multi-plug 4', 'Multi-plug 5', 'Multi-plug 6',
+            'Wifi-plug'
+        )
+ );
+
+-- 2) Insert the canonical (1 in on top, N out on bottom) profile.
+-- IOx-3 — 1 in + 3 out
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power In',  1, 'top',    0 FROM device_types WHERE name='IOx-3' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power Out', 3, 'bottom', 1 FROM device_types WHERE name='IOx-3' AND project_id IS NULL;
+
+-- IOx-6 — 1 in + 6 out
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power In',  1, 'top',    0 FROM device_types WHERE name='IOx-6' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power Out', 6, 'bottom', 1 FROM device_types WHERE name='IOx-6' AND project_id IS NULL;
+
+-- IOx-8 — 1 in + 8 out
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power In',  1, 'top',    0 FROM device_types WHERE name='IOx-8' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power Out', 8, 'bottom', 1 FROM device_types WHERE name='IOx-8' AND project_id IS NULL;
+
+-- Multi-plug 3 — 1 in + 3 out
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power In',  1, 'top',    0 FROM device_types WHERE name='Multi-plug 3' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power Out', 3, 'bottom', 1 FROM device_types WHERE name='Multi-plug 3' AND project_id IS NULL;
+
+-- Multi-plug 4 — 1 in + 4 out
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power In',  1, 'top',    0 FROM device_types WHERE name='Multi-plug 4' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power Out', 4, 'bottom', 1 FROM device_types WHERE name='Multi-plug 4' AND project_id IS NULL;
+
+-- Multi-plug 5 — 1 in + 5 out
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power In',  1, 'top',    0 FROM device_types WHERE name='Multi-plug 5' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power Out', 5, 'bottom', 1 FROM device_types WHERE name='Multi-plug 5' AND project_id IS NULL;
+
+-- Multi-plug 6 — 1 in + 6 out
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power In',  1, 'top',    0 FROM device_types WHERE name='Multi-plug 6' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power Out', 6, 'bottom', 1 FROM device_types WHERE name='Multi-plug 6' AND project_id IS NULL;
+
+-- Wifi-plug — 1 in + 1 out (pass-through outlet)
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power In',  1, 'top',    0 FROM device_types WHERE name='Wifi-plug' AND project_id IS NULL;
+INSERT INTO device_type_ports (device_type_id, cable_type_id, label_prefix, count, edge, sort_order)
+    SELECT id, 1, 'Power Out', 1, 'bottom', 1 FROM device_types WHERE name='Wifi-plug' AND project_id IS NULL;

internal/db/migrations/007_clamps.sql

@@ -0,0 +1,31 @@
+-- CableGUI v5 — cable routing via clamps. See docs/design.md §11.
+--
+-- A clamp is a physical anchor placed on the canvas. A cable's polyline
+-- runs from its `from` endpoint → its clamps in `ord` sequence → its
+-- `to` endpoint. Cables that share an ordered pair of consecutive
+-- clamps are visibly bundled along that segment (computed live by the
+-- frontend; no detection pass).
+
+CREATE TABLE clamps (
+    id              INTEGER PRIMARY KEY,
+    project_id      INTEGER NOT NULL REFERENCES projects(id) ON DELETE CASCADE,
+    x               REAL NOT NULL,
+    y               REAL NOT NULL,
+    label           TEXT NOT NULL DEFAULT '',
+    frame_id        INTEGER REFERENCES frames(id) ON DELETE SET NULL,
+    excalidraw_id   TEXT,
+    created_at      TEXT NOT NULL DEFAULT (datetime('now')),
+    updated_at      TEXT NOT NULL DEFAULT (datetime('now')),
+    UNIQUE (project_id, excalidraw_id)
+);
+CREATE INDEX clamps_project_idx ON clamps(project_id);
+CREATE INDEX clamps_frame_idx   ON clamps(frame_id);
+
+CREATE TABLE cable_clamps (
+    cable_id        INTEGER NOT NULL REFERENCES cables(id) ON DELETE CASCADE,
+    clamp_id        INTEGER NOT NULL REFERENCES clamps(id) ON DELETE CASCADE,
+    ord             INTEGER NOT NULL,            -- 1-based along from→to
+    PRIMARY KEY (cable_id, ord),
+    UNIQUE (cable_id, clamp_id)
+);
+CREATE INDEX cable_clamps_clamp_idx ON cable_clamps(clamp_id);

internal/db/models.go

@@ -34,10 +34,13 @@ type Frame struct {
 }
 
 // Device is a hardware item inside a project, optionally inside a frame.
+// v4: type_id (nullable) lets a device inherit its port profile from a
+// device_types catalog row.
 type Device struct {
 	ID            int64   `json:"id"`
 	ProjectID     int64   `json:"project_id"`
 	FrameID       *int64  `json:"frame_id"`           // nullable: device "outside" any frame
+	TypeID        *int64  `json:"type_id"`            // nullable: freeform device when null
 	Name          string  `json:"name"`
 	Color         string  `json:"color"`
 	X             float64 `json:"x"`
@@ -49,16 +52,197 @@ type Device struct {
 	UpdatedAt     string  `json:"updated_at"`
 }
 
+// DeviceType is a catalog row. Built-in rows have ProjectID nil and
+// BuiltIn true. Project-custom rows have ProjectID set.
+type DeviceType struct {
+	ID          int64             `json:"id"`
+	ProjectID   *int64            `json:"project_id"`
+	Name        string            `json:"name"`
+	Kind        string            `json:"kind"`
+	Icon        *string           `json:"icon,omitempty"`
+	Description string            `json:"description"`
+	BuiltIn     bool              `json:"built_in"`
+	Ports       []DeviceTypePort  `json:"ports"`
+	CreatedAt   string            `json:"created_at"`
+	UpdatedAt   string            `json:"updated_at"`
+}
+
+// DeviceTypePort is a row of a type's port profile. The seeder uses
+// (cable_type_id, count, label_prefix, edge, sort_order) to lay out
+// concrete ports on a freshly-created device.
+type DeviceTypePort struct {
+	ID            int64  `json:"id"`
+	DeviceTypeID  int64  `json:"device_type_id"`
+	CableTypeID   int64  `json:"cable_type_id"`
+	LabelPrefix   string `json:"label_prefix"`
+	Count         int    `json:"count"`
+	Edge          string `json:"edge"`
+	SortOrder     int    `json:"sort_order"`
+}
+
+// Port is a connector on a device. cable_type colour drives the visual
+// rendering; ports are instance-owned even when seeded from a type.
+type Port struct {
+	ID            int64   `json:"id"`
+	ProjectID     int64   `json:"project_id"`
+	DeviceID      int64   `json:"device_id"`
+	TypeID        int64   `json:"type_id"`         // cable type
+	Label         *string `json:"label"`
+	XOffset       float64 `json:"x_offset"`
+	YOffset       float64 `json:"y_offset"`
+	ExcalidrawID  *string `json:"excalidraw_id,omitempty"`
+	CreatedAt     string  `json:"created_at"`
+	UpdatedAt     string  `json:"updated_at"`
+}
+
+// ConnectionRequirement is the solver's per-project input.
+// pair_lo/pair_hi are the ordered (MIN,MAX) of (from, to) so the
+// UNIQUE on (project_id, pair_lo, pair_hi, preferred_cable_type_id)
+// prevents (A,B,T) AND (B,A,T) from coexisting.
+type ConnectionRequirement struct {
+	ID                    int64  `json:"id"`
+	ProjectID             int64  `json:"project_id"`
+	FromDeviceID          int64  `json:"from_device_id"`
+	ToDeviceID            int64  `json:"to_device_id"`
+	PreferredCableTypeID  *int64 `json:"preferred_cable_type_id"`
+	MustConnect           bool   `json:"must_connect"`
+	Notes                 string `json:"notes"`
+	CreatedAt             string `json:"created_at"`
+	UpdatedAt             string `json:"updated_at"`
+}
+
+// Cable is a typed connection. Each endpoint is exactly one of
+// (port, device, io-marker). Auto=true means the solver placed it.
+type Cable struct {
+	ID            int64   `json:"id"`
+	ProjectID     int64   `json:"project_id"`
+	TypeID        int64   `json:"type_id"`
+	Label         *string `json:"label"`
+	FromPortID    *int64  `json:"from_port_id"`
+	FromDeviceID  *int64  `json:"from_device_id"`
+	FromIOID      *int64  `json:"from_io_id"`
+	ToPortID      *int64  `json:"to_port_id"`
+	ToDeviceID    *int64  `json:"to_device_id"`
+	ToIOID        *int64  `json:"to_io_id"`
+	Auto          bool    `json:"auto"`
+	ExcalidrawID  *string `json:"excalidraw_id,omitempty"`
+	CreatedAt     string  `json:"created_at"`
+	UpdatedAt     string  `json:"updated_at"`
+}
+
+// Bundle is a named group of cables that physically run together.
+type Bundle struct {
+	ID         int64   `json:"id"`
+	ProjectID  int64   `json:"project_id"`
+	Name       string  `json:"name"`
+	Auto       bool    `json:"auto"`
+	CableIDs   []int64 `json:"cable_ids"`
+	CreatedAt  string  `json:"created_at"`
+	UpdatedAt  string  `json:"updated_at"`
+}
+
+// SetupTemplate is a named recipe of device-types + requirements.
+type SetupTemplate struct {
+	ID           int64                       `json:"id"`
+	Name         string                      `json:"name"`
+	Description  string                      `json:"description"`
+	BuiltIn      bool                        `json:"built_in"`
+	Devices      []SetupTemplateDevice       `json:"devices"`
+	Requirements []SetupTemplateRequirement  `json:"requirements"`
+	CreatedAt    string                      `json:"created_at"`
+	UpdatedAt    string                      `json:"updated_at"`
+}
+
+type SetupTemplateDevice struct {
+	ID             int64       `json:"id"`
+	TemplateID     int64       `json:"template_id"`
+	DeviceTypeID   int64       `json:"device_type_id"`
+	DeviceType     *DeviceType `json:"device_type,omitempty"`
+	SuggestedName  *string     `json:"suggested_name"`
+	SortOrder      int         `json:"sort_order"`
+}
+
+type SetupTemplateRequirement struct {
+	ID                      int64  `json:"id"`
+	TemplateID              int64  `json:"template_id"`
+	FromTemplateDeviceID    int64  `json:"from_template_device_id"`
+	ToTemplateDeviceID      int64  `json:"to_template_device_id"`
+	PreferredCableTypeID    *int64 `json:"preferred_cable_type_id"`
+	MustConnect             bool   `json:"must_connect"`
+}
+
+// SolveResult is the response shape from POST /api/projects/:pid/solve.
+type SolveResult struct {
+	CablesAdded     []Cable                `json:"cables_added"`
+	CablesKept      []int64                `json:"cables_kept"`
+	CablesRemoved   []int64                `json:"cables_removed"`
+	BundlesAdded    []Bundle               `json:"bundles_added"`
+	BundlesRemoved  []int64                `json:"bundles_removed"`
+	Unsatisfied     []UnsatisfiedReq       `json:"unsatisfied"`
+	Warnings        []string               `json:"warnings"`
+}
+
+type UnsatisfiedReq struct {
+	RequirementID int64  `json:"requirement_id"`
+	Reason        string `json:"reason"`
+	WhichSide     string `json:"which_side,omitempty"` // "from" | "to" | "" when both/neither
+	CableType     string `json:"cable_type,omitempty"`  // when known
+}
+
+// ApplyTemplateResult is the response from POST /apply-template.
+type ApplyTemplateResult struct {
+	FramesAdded         []Frame                 `json:"frames_added"`
+	DevicesAdded        []Device                `json:"devices_added"`
+	RequirementsAdded   []ConnectionRequirement `json:"requirements_added"`
+	SkippedDevices      []SkippedTemplateDevice `json:"skipped_devices"`
+	RequirementsSkipped []SkippedTemplateReq    `json:"requirements_skipped"`
+}
+
+type SkippedTemplateDevice struct {
+	TemplateDeviceID int64  `json:"template_device_id"`
+	Reason           string `json:"reason"`
+}
+type SkippedTemplateReq struct {
+	TemplateRequirementID int64  `json:"template_requirement_id"`
+	Reason                string `json:"reason"`
+}
+
 // Snapshot is the editor's one-shot loader payload for a single project.
 // Arrays for collections still gated by future slices stay non-nil [] so
 // JSON encodes as [] not null.
 type Snapshot struct {
-	Project    Project     `json:"project"`
-	Frames     []Frame     `json:"frames"`
-	Devices    []Device    `json:"devices"`
-	Ports      []any       `json:"ports"`
-	Cables     []any       `json:"cables"`
-	IOMarkers  []any       `json:"io_markers"`
-	Bundles    []any       `json:"bundles"`
-	CableTypes []CableType `json:"cable_types"`
+	Project                Project                 `json:"project"`
+	Frames                 []Frame                 `json:"frames"`
+	Devices                []Device                `json:"devices"`
+	Ports                  []Port                  `json:"ports"`
+	Cables                 []Cable                 `json:"cables"`
+	IOMarkers              []IOMarker              `json:"io_markers"`
+	Bundles                []Bundle                `json:"bundles"`
+	CableTypes             []CableType             `json:"cable_types"`
+	ConnectionRequirements []ConnectionRequirement `json:"connection_requirements"`
+	Clamps                 []Clamp                 `json:"clamps"`
+	CableClamps            []CableClamp            `json:"cable_clamps"`
+}
+
+// Clamp is a routing anchor on the canvas. Cables route through clamps
+// in `ord` sequence (see cable_clamps), giving m a physical handle on
+// where bundles converge.
+type Clamp struct {
+	ID           int64   `json:"id"`
+	ProjectID    int64   `json:"project_id"`
+	X            float64 `json:"x"`
+	Y            float64 `json:"y"`
+	Label        string  `json:"label"`
+	FrameID      *int64  `json:"frame_id"`
+	ExcalidrawID *string `json:"excalidraw_id,omitempty"`
+	CreatedAt    string  `json:"created_at"`
+	UpdatedAt    string  `json:"updated_at"`
+}
+
+// CableClamp is one (cable, clamp, ord) row. Ord is 1-based along the
+// cable's from→to direction.
+type CableClamp struct {
+	CableID int64 `json:"cable_id"`
+	ClampID int64 `json:"clamp_id"`
+	Ord     int   `json:"ord"`
 }

internal/db/ports.go

@@ -0,0 +1,359 @@
+package db
+
+import (
+	"database/sql"
+	"errors"
+	"fmt"
+	"strings"
+)
+
+// PortCreate is the create-shape for POST /api/projects/:pid/devices/:id/ports.
+type PortCreate struct {
+	TypeID  int64
+	Label   string
+	XOffset float64
+	YOffset float64
+}
+
+// PortUpdate is the partial-update shape.
+type PortUpdate struct {
+	TypeID  *int64
+	Label   *string
+	XOffset *float64
+	YOffset *float64
+}
+
+// CreatePort inserts a port on a device. The device must exist in the
+// project; the cable type must exist globally.
+func (s *Store) CreatePort(projectID, deviceID int64, p PortCreate) (*Port, error) {
+	if _, err := s.GetDevice(projectID, deviceID); err != nil {
+		return nil, err
+	}
+	if _, err := s.GetCableType(p.TypeID); err != nil {
+		if errors.Is(err, ErrNotFound) {
+			return nil, fmt.Errorf("%w: cable type %d not found", ErrInvalidInput, p.TypeID)
+		}
+		return nil, err
+	}
+	label := strings.TrimSpace(p.Label)
+	var labelArg any
+	if label != "" {
+		labelArg = label
+	}
+	res, err := s.db.Exec(
+		`INSERT INTO ports (project_id, device_id, type_id, label, x_offset, y_offset)
+		 VALUES (?, ?, ?, ?, ?, ?)`,
+		projectID, deviceID, p.TypeID, labelArg, p.XOffset, p.YOffset,
+	)
+	if err != nil {
+		return nil, mapWriteErr(err)
+	}
+	id, _ := res.LastInsertId()
+	return s.GetPort(projectID, id)
+}
+
+// GetPort loads a port by id, project-scoped.
+func (s *Store) GetPort(projectID, id int64) (*Port, error) {
+	var p Port
+	var label, ex sql.NullString
+	err := s.db.QueryRow(
+		`SELECT id, project_id, device_id, type_id, label, x_offset, y_offset,
+		        excalidraw_id, created_at, updated_at
+		 FROM ports WHERE id = ? AND project_id = ?`, id, projectID,
+	).Scan(&p.ID, &p.ProjectID, &p.DeviceID, &p.TypeID, &label,
+		&p.XOffset, &p.YOffset, &ex, &p.CreatedAt, &p.UpdatedAt)
+	if errors.Is(err, sql.ErrNoRows) {
+		return nil, ErrNotFound
+	}
+	if err != nil {
+		return nil, err
+	}
+	if label.Valid {
+		v := label.String
+		p.Label = &v
+	}
+	if ex.Valid {
+		p.ExcalidrawID = &ex.String
+	}
+	return &p, nil
+}
+
+// UpdatePort applies a partial update.
+func (s *Store) UpdatePort(projectID, id int64, u PortUpdate) (*Port, error) {
+	cur, err := s.GetPort(projectID, id)
+	if err != nil {
+		return nil, err
+	}
+	if u.TypeID != nil {
+		if _, err := s.GetCableType(*u.TypeID); err != nil {
+			if errors.Is(err, ErrNotFound) {
+				return nil, fmt.Errorf("%w: cable type %d not found", ErrInvalidInput, *u.TypeID)
+			}
+			return nil, err
+		}
+		cur.TypeID = *u.TypeID
+	}
+	if u.Label != nil {
+		v := strings.TrimSpace(*u.Label)
+		if v == "" {
+			cur.Label = nil
+		} else {
+			cur.Label = &v
+		}
+	}
+	if u.XOffset != nil {
+		cur.XOffset = *u.XOffset
+	}
+	if u.YOffset != nil {
+		cur.YOffset = *u.YOffset
+	}
+	var labelArg any
+	if cur.Label != nil {
+		labelArg = *cur.Label
+	}
+	if _, err := s.db.Exec(
+		`UPDATE ports
+		 SET type_id = ?, label = ?, x_offset = ?, y_offset = ?, updated_at = datetime('now')
+		 WHERE id = ? AND project_id = ?`,
+		cur.TypeID, labelArg, cur.XOffset, cur.YOffset, id, projectID,
+	); err != nil {
+		return nil, mapWriteErr(err)
+	}
+	return s.GetPort(projectID, id)
+}
+
+// DeletePort removes a port from a device. The schema's
+// ON DELETE SET NULL on cables.from_port_id / to_port_id collides with
+// the cable's CHECK ((from_port|from_device|from_io) = 1 non-null), so
+// we instead cascade-delete any cables that referenced the port on
+// either side — same effect from m's POV: the cable is gone, m can
+// re-draw if he still wants it.
+func (s *Store) DeletePort(projectID, id int64) error {
+	if _, err := s.GetPort(projectID, id); err != nil {
+		return err
+	}
+	tx, err := s.db.Begin()
+	if err != nil {
+		return err
+	}
+	defer tx.Rollback()
+	if _, err := tx.Exec(
+		`DELETE FROM cables WHERE project_id = ? AND (from_port_id = ? OR to_port_id = ?)`,
+		projectID, id, id,
+	); err != nil {
+		return err
+	}
+	if _, err := tx.Exec(
+		`DELETE FROM ports WHERE id = ? AND project_id = ?`, id, projectID,
+	); err != nil {
+		return err
+	}
+	return tx.Commit()
+}
+
+// ListPortsForDevice returns every port on one device, project-scoped.
+func (s *Store) ListPortsForDevice(projectID, deviceID int64) ([]Port, error) {
+	rows, err := s.db.Query(
+		`SELECT id, project_id, device_id, type_id, label, x_offset, y_offset,
+		        excalidraw_id, created_at, updated_at
+		 FROM ports WHERE project_id = ? AND device_id = ? ORDER BY id`,
+		projectID, deviceID,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []Port{}
+	for rows.Next() {
+		var p Port
+		var label, ex sql.NullString
+		if err := rows.Scan(&p.ID, &p.ProjectID, &p.DeviceID, &p.TypeID, &label,
+			&p.XOffset, &p.YOffset, &ex, &p.CreatedAt, &p.UpdatedAt); err != nil {
+			return nil, err
+		}
+		if label.Valid {
+			v := label.String
+			p.Label = &v
+		}
+		if ex.Valid {
+			p.ExcalidrawID = &ex.String
+		}
+		out = append(out, p)
+	}
+	return out, rows.Err()
+}
+
+// ListPortsForProject returns every port in a project, ordered by
+// device_id + id so callers can group cheaply.
+func (s *Store) ListPortsForProject(projectID int64) ([]Port, error) {
+	rows, err := s.db.Query(
+		`SELECT id, project_id, device_id, type_id, label, x_offset, y_offset,
+		        excalidraw_id, created_at, updated_at
+		 FROM ports WHERE project_id = ? ORDER BY device_id, id`, projectID,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []Port{}
+	for rows.Next() {
+		var p Port
+		var label, ex sql.NullString
+		if err := rows.Scan(&p.ID, &p.ProjectID, &p.DeviceID, &p.TypeID,
+			&label, &p.XOffset, &p.YOffset, &ex, &p.CreatedAt, &p.UpdatedAt); err != nil {
+			return nil, err
+		}
+		if label.Valid {
+			v := label.String
+			p.Label = &v
+		}
+		if ex.Valid {
+			p.ExcalidrawID = &ex.String
+		}
+		out = append(out, p)
+	}
+	return out, rows.Err()
+}
+
+// seedPortsFromType inserts the ports for a freshly-created device using
+// the type's `device_type_ports` profile. Port positions are computed by
+// laying out cable-type groups evenly along the configured edge of the
+// device, ordered by sort_order. Within a multi-count group the per-port
+// spacing is also even. Runs inside the same transaction as the device
+// insert so a failure rolls everything back.
+//
+// Layout strategy (v0):
+//   - All ports for a given type sit on the type's configured edge.
+//   - For each edge, compute total port count N (sum of count across
+//     entries on that edge) and distribute as t_i = (i + 1)/(N+1) along
+//     the edge length, so ports don't touch the corners.
+//   - For top/bottom: x_offset = w * t, y_offset = 0 (top) or h (bottom).
+//   - For left/right: x_offset = 0 (left) or w (right), y_offset = h * t.
+//   - Labels: '<prefix>' if count==1, '<prefix> N' (1-indexed) if count>1.
+//     Empty prefix → NULL label.
+func (s *Store) seedPortsFromType(tx *sql.Tx, projectID, deviceID, typeID int64, width, height float64) error {
+	rows, err := tx.Query(
+		`SELECT cable_type_id, label_prefix, count, edge, sort_order
+		 FROM device_type_ports
+		 WHERE device_type_id = ?
+		 ORDER BY edge, sort_order, id`, typeID,
+	)
+	if err != nil {
+		return err
+	}
+	type pendingPort struct {
+		cableTypeID int64
+		label       *string
+		xOff        float64
+		yOff        float64
+	}
+	// Group rows by edge first; emit per-port y-or-x slots inside each edge.
+	type groupRow struct {
+		cableTypeID int64
+		labelPrefix string
+		count       int
+	}
+	byEdge := map[string][]groupRow{}
+	for rows.Next() {
+		var g groupRow
+		var edge string
+		var sortOrder int
+		if err := rows.Scan(&g.cableTypeID, &g.labelPrefix, &g.count, &edge, &sortOrder); err != nil {
+			rows.Close()
+			return err
+		}
+		byEdge[edge] = append(byEdge[edge], g)
+	}
+	if err := rows.Close(); err != nil {
+		return err
+	}
+	if err := rows.Err(); err != nil {
+		return err
+	}
+
+	var pending []pendingPort
+	for _, edge := range []string{"top", "bottom", "left", "right"} {
+		groups := byEdge[edge]
+		if len(groups) == 0 {
+			continue
+		}
+		total := 0
+		for _, g := range groups {
+			total += g.count
+		}
+		if total == 0 {
+			continue
+		}
+		// Emit ports in group + within-group order.
+		idx := 0
+		for _, g := range groups {
+			for k := 0; k < g.count; k++ {
+				t := float64(idx+1) / float64(total+1)
+				var xOff, yOff float64
+				switch edge {
+				case "top":
+					xOff, yOff = width*t, 0
+				case "bottom":
+					xOff, yOff = width*t, height
+				case "left":
+					xOff, yOff = 0, height*t
+				case "right":
+					xOff, yOff = width, height*t
+				}
+				var labelPtr *string
+				if g.labelPrefix != "" {
+					var lbl string
+					if g.count == 1 {
+						lbl = g.labelPrefix
+					} else {
+						lbl = g.labelPrefix + " " + itoa(k+1)
+					}
+					labelPtr = &lbl
+				}
+				pending = append(pending, pendingPort{
+					cableTypeID: g.cableTypeID, label: labelPtr,
+					xOff: xOff, yOff: yOff,
+				})
+				idx++
+			}
+		}
+	}
+
+	for _, p := range pending {
+		var labelArg any
+		if p.label != nil {
+			labelArg = *p.label
+		}
+		if _, err := tx.Exec(
+			`INSERT INTO ports (project_id, device_id, type_id, label, x_offset, y_offset)
+			 VALUES (?, ?, ?, ?, ?, ?)`,
+			projectID, deviceID, p.cableTypeID, labelArg, p.xOff, p.yOff,
+		); err != nil {
+			return mapWriteErr(err)
+		}
+	}
+	return nil
+}
+
+// itoa is a tiny non-allocating int-to-string for port labels.
+func itoa(i int) string {
+	if i == 0 {
+		return "0"
+	}
+	buf := [20]byte{}
+	pos := len(buf)
+	neg := i < 0
+	if neg {
+		i = -i
+	}
+	for i > 0 {
+		pos--
+		buf[pos] = byte('0' + i%10)
+		i /= 10
+	}
+	if neg {
+		pos--
+		buf[pos] = '-'
+	}
+	return string(buf[pos:])
+}

internal/db/setup_templates.go

@@ -0,0 +1,465 @@
+package db
+
+import (
+	"database/sql"
+	"errors"
+	"fmt"
+	"math"
+	"strings"
+)
+
+// ListSetupTemplates returns every template with its devices +
+// requirements hydrated.
+func (s *Store) ListSetupTemplates() ([]SetupTemplate, error) {
+	rows, err := s.db.Query(
+		`SELECT id, name, description, built_in, created_at, updated_at
+		 FROM setup_templates ORDER BY id`,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []SetupTemplate{}
+	for rows.Next() {
+		var t SetupTemplate
+		var built int
+		if err := rows.Scan(&t.ID, &t.Name, &t.Description, &built,
+			&t.CreatedAt, &t.UpdatedAt); err != nil {
+			return nil, err
+		}
+		t.BuiltIn = built != 0
+		out = append(out, t)
+	}
+	if err := rows.Err(); err != nil {
+		return nil, err
+	}
+	for i := range out {
+		devs, err := s.listTemplateDevices(out[i].ID)
+		if err != nil {
+			return nil, err
+		}
+		out[i].Devices = devs
+		reqs, err := s.listTemplateRequirements(out[i].ID)
+		if err != nil {
+			return nil, err
+		}
+		out[i].Requirements = reqs
+	}
+	return out, nil
+}
+
+// GetSetupTemplate is a one-template variant of List.
+func (s *Store) GetSetupTemplate(id int64) (*SetupTemplate, error) {
+	var t SetupTemplate
+	var built int
+	err := s.db.QueryRow(
+		`SELECT id, name, description, built_in, created_at, updated_at
+		 FROM setup_templates WHERE id = ?`, id,
+	).Scan(&t.ID, &t.Name, &t.Description, &built, &t.CreatedAt, &t.UpdatedAt)
+	if errors.Is(err, sql.ErrNoRows) {
+		return nil, ErrNotFound
+	}
+	if err != nil {
+		return nil, err
+	}
+	t.BuiltIn = built != 0
+	t.Devices, err = s.listTemplateDevices(t.ID)
+	if err != nil {
+		return nil, err
+	}
+	t.Requirements, err = s.listTemplateRequirements(t.ID)
+	if err != nil {
+		return nil, err
+	}
+	return &t, nil
+}
+
+func (s *Store) listTemplateDevices(templateID int64) ([]SetupTemplateDevice, error) {
+	rows, err := s.db.Query(
+		`SELECT id, template_id, device_type_id, suggested_name, sort_order
+		 FROM setup_template_devices WHERE template_id = ? ORDER BY sort_order, id`,
+		templateID,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []SetupTemplateDevice{}
+	for rows.Next() {
+		var d SetupTemplateDevice
+		var sn sql.NullString
+		if err := rows.Scan(&d.ID, &d.TemplateID, &d.DeviceTypeID, &sn, &d.SortOrder); err != nil {
+			return nil, err
+		}
+		if sn.Valid {
+			v := sn.String
+			d.SuggestedName = &v
+		}
+		out = append(out, d)
+	}
+	if err := rows.Err(); err != nil {
+		return nil, err
+	}
+	// Hydrate the device_type for the UI's optgroup labels.
+	for i := range out {
+		dt, err := s.GetDeviceType(out[i].DeviceTypeID)
+		if err == nil {
+			out[i].DeviceType = dt
+		}
+	}
+	return out, nil
+}
+
+func (s *Store) listTemplateRequirements(templateID int64) ([]SetupTemplateRequirement, error) {
+	rows, err := s.db.Query(
+		`SELECT id, template_id, from_template_device_id, to_template_device_id,
+		        preferred_cable_type_id, must_connect
+		 FROM setup_template_requirements WHERE template_id = ? ORDER BY id`,
+		templateID,
+	)
+	if err != nil {
+		return nil, err
+	}
+	defer rows.Close()
+	out := []SetupTemplateRequirement{}
+	for rows.Next() {
+		var r SetupTemplateRequirement
+		var pct sql.NullInt64
+		var must int
+		if err := rows.Scan(&r.ID, &r.TemplateID, &r.FromTemplateDeviceID, &r.ToTemplateDeviceID,
+			&pct, &must); err != nil {
+			return nil, err
+		}
+		if pct.Valid {
+			v := pct.Int64
+			r.PreferredCableTypeID = &v
+		}
+		r.MustConnect = must != 0
+		out = append(out, r)
+	}
+	return out, rows.Err()
+}
+
+// ApplyTemplateOptions controls per-device name overrides + opt-outs.
+type ApplyTemplateOptions struct {
+	NameOverrides map[int64]string // template_device_id → custom name
+	SkipDevices   map[int64]bool   // template_device_id → skip
+	// Layout: where to place the first device in the cluster on the canvas.
+	OriginX, OriginY float64
+}
+
+// ApplyTemplate seeds devices + requirements from the template into
+// projectID in a single transaction. Name collisions skip the device
+// (recorded in skipped_devices); requirements whose endpoints both fail
+// to land are also skipped.
+func (s *Store) ApplyTemplate(projectID, templateID int64, opts ApplyTemplateOptions) (*ApplyTemplateResult, error) {
+	tmpl, err := s.GetSetupTemplate(templateID)
+	if err != nil {
+		return nil, err
+	}
+	if _, err := s.GetProject(projectID); err != nil {
+		return nil, err
+	}
+
+	out := &ApplyTemplateResult{
+		FramesAdded:         []Frame{},
+		DevicesAdded:        []Device{},
+		RequirementsAdded:   []ConnectionRequirement{},
+		SkippedDevices:      []SkippedTemplateDevice{},
+		RequirementsSkipped: []SkippedTemplateReq{},
+	}
+
+	if opts.OriginX == 0 && opts.OriginY == 0 {
+		opts.OriginX, opts.OriginY = 200, 200
+	}
+
+	// Pull existing device + frame names in the project so we can
+	// pre-check collisions without aborting the whole transaction.
+	existing, err := s.ListDevices(projectID, nil)
+	if err != nil {
+		return nil, err
+	}
+	nameTaken := map[string]bool{}
+	for _, d := range existing {
+		nameTaken[d.Name] = true
+	}
+	existingFrames, err := s.ListFrames(projectID)
+	if err != nil {
+		return nil, err
+	}
+	frameNameTaken := map[string]bool{}
+	for _, f := range existingFrames {
+		frameNameTaken[f.Name] = true
+	}
+
+	tx, err := s.db.Begin()
+	if err != nil {
+		return nil, err
+	}
+	defer tx.Rollback()
+
+	// Plan a uniform grid for the template's devices inside a new frame
+	// named after the template. The grid drives both frame size and
+	// per-device (x, y). Devices that get skipped (name collision /
+	// SkipDevices) leave their grid cell empty.
+	const (
+		devW, devH = 100.0, 35.0
+		gapX, gapY = 30.0, 50.0
+		padX, padY = 32.0, 48.0 // padY larger so the frame title clears row 1
+	)
+	n := len(tmpl.Devices)
+	cols := 1
+	if n > 0 {
+		cols = min(int(math.Ceil(math.Sqrt(float64(n)))), 4)
+	}
+	rows := 1
+	if n > 0 {
+		rows = (n + cols - 1) / cols
+	}
+	frameW := padX*2 + float64(cols)*devW + float64(cols-1)*gapX
+	frameH := padY + padX + float64(rows)*devH + float64(rows-1)*gapY
+	frameName := pickFrameName(tmpl.Name, frameNameTaken)
+
+	frame, err := createFrameTx(tx, projectID, FrameCreate{
+		Name: frameName, X: opts.OriginX, Y: opts.OriginY,
+		Width: frameW, Height: frameH,
+	})
+	if err != nil {
+		return nil, fmt.Errorf("seed frame %q: %w", frameName, err)
+	}
+	out.FramesAdded = append(out.FramesAdded, *frame)
+
+	// Map: template_device_id → newly-created device_id (or 0 if skipped).
+	tmplToDevice := map[int64]int64{}
+
+	for i, td := range tmpl.Devices {
+		if opts.SkipDevices[td.ID] {
+			out.SkippedDevices = append(out.SkippedDevices, SkippedTemplateDevice{
+				TemplateDeviceID: td.ID, Reason: "skip requested",
+			})
+			tmplToDevice[td.ID] = 0
+			continue
+		}
+		name := opts.NameOverrides[td.ID]
+		if name == "" && td.SuggestedName != nil {
+			name = *td.SuggestedName
+		}
+		if name == "" {
+			name = fmt.Sprintf("Device %d", td.ID)
+		}
+		name = strings.TrimSpace(name)
+		if nameTaken[name] {
+			out.SkippedDevices = append(out.SkippedDevices, SkippedTemplateDevice{
+				TemplateDeviceID: td.ID,
+				Reason:           fmt.Sprintf("name %q already used in project", name),
+			})
+			tmplToDevice[td.ID] = 0
+			continue
+		}
+		// Grid cell (col, row) within the frame. Cell anchor is the
+		// top-left of the device rect; offsets are added to the frame's
+		// own (x, y) so the device sits inside the frame.
+		col := i % cols
+		row := i / cols
+		x := frame.X + padX + float64(col)*(devW+gapX)
+		y := frame.Y + padY + float64(row)*(devH+gapY)
+		// Use createDeviceTx so port-seeding shares the same transaction.
+		d, err := s.createDeviceTx(tx, projectID, DeviceCreate{
+			Name:    name,
+			TypeID:  &td.DeviceTypeID,
+			FrameID: &frame.ID,
+			X:       x,
+			Y:       y,
+			Width:   devW,
+			Height:  devH,
+		})
+		if err != nil {
+			return nil, fmt.Errorf("seed %s: %w", name, err)
+		}
+		nameTaken[name] = true
+		tmplToDevice[td.ID] = d.ID
+		out.DevicesAdded = append(out.DevicesAdded, *d)
+	}
+
+	for _, tr := range tmpl.Requirements {
+		fromID := tmplToDevice[tr.FromTemplateDeviceID]
+		toID := tmplToDevice[tr.ToTemplateDeviceID]
+		if fromID == 0 || toID == 0 {
+			out.RequirementsSkipped = append(out.RequirementsSkipped, SkippedTemplateReq{
+				TemplateRequirementID: tr.ID,
+				Reason:                "one or both endpoint devices were skipped",
+			})
+			continue
+		}
+		// Normalise pair_lo/pair_hi, mirror what CreateConnectionRequirement does.
+		lo, hi := fromID, toID
+		if lo > hi {
+			lo, hi = hi, lo
+		}
+		must := 0
+		if tr.MustConnect {
+			must = 1
+		}
+		var ctArg any
+		if tr.PreferredCableTypeID != nil {
+			ctArg = *tr.PreferredCableTypeID
+		}
+		res, err := tx.Exec(
+			`INSERT INTO connection_requirements
+			   (project_id, from_device_id, to_device_id, preferred_cable_type_id,
+			    must_connect, notes, pair_lo, pair_hi)
+			 VALUES (?, ?, ?, ?, ?, '', ?, ?)`,
+			projectID, fromID, toID, ctArg, must, lo, hi,
+		)
+		if err != nil {
+			// A UNIQUE collision (project already has the same requirement)
+			// is non-fatal — record as skipped, continue.
+			if strings.Contains(err.Error(), "UNIQUE constraint failed") {
+				out.RequirementsSkipped = append(out.RequirementsSkipped, SkippedTemplateReq{
+					TemplateRequirementID: tr.ID,
+					Reason:                "requirement already exists in project",
+				})
+				continue
+			}
+			return nil, err
+		}
+		rid, _ := res.LastInsertId()
+		out.RequirementsAdded = append(out.RequirementsAdded, ConnectionRequirement{
+			ID:                   rid,
+			ProjectID:            projectID,
+			FromDeviceID:         fromID,
+			ToDeviceID:           toID,
+			PreferredCableTypeID: tr.PreferredCableTypeID,
+			MustConnect:          tr.MustConnect,
+		})
+	}
+
+	if err := tx.Commit(); err != nil {
+		return nil, err
+	}
+	return out, nil
+}
+
+// pickFrameName returns a frame name that doesn't collide with anything
+// in `taken`. Tries the template name first, then "<name> 2", "<name> 3",
+// and so on.
+func pickFrameName(base string, taken map[string]bool) string {
+	if !taken[base] {
+		return base
+	}
+	for i := 2; ; i++ {
+		candidate := fmt.Sprintf("%s %d", base, i)
+		if !taken[candidate] {
+			return candidate
+		}
+	}
+}
+
+// createFrameTx inserts a frame inside the caller's transaction. Mirrors
+// the validation in CreateFrame (name + positive size) but avoids the
+// s.db.Exec call so ApplyTemplate can keep everything on the same
+// connection under MaxOpenConns(1).
+func createFrameTx(tx *sql.Tx, projectID int64, f FrameCreate) (*Frame, error) {
+	name := strings.TrimSpace(f.Name)
+	if name == "" {
+		return nil, fmt.Errorf("%w: name is required", ErrInvalidInput)
+	}
+	if f.Width <= 0 || f.Height <= 0 {
+		return nil, fmt.Errorf("%w: width and height must be positive", ErrInvalidInput)
+	}
+	res, err := tx.Exec(
+		`INSERT INTO frames (project_id, name, x, y, width, height)
+		 VALUES (?, ?, ?, ?, ?, ?)`,
+		projectID, name, f.X, f.Y, f.Width, f.Height,
+	)
+	if err != nil {
+		return nil, mapWriteErr(err)
+	}
+	id, _ := res.LastInsertId()
+	var out Frame
+	var ex sql.NullString
+	err = tx.QueryRow(
+		`SELECT id, project_id, name, x, y, width, height, excalidraw_id, created_at, updated_at
+		 FROM frames WHERE id = ? AND project_id = ?`, id, projectID,
+	).Scan(&out.ID, &out.ProjectID, &out.Name, &out.X, &out.Y, &out.Width, &out.Height,
+		&ex, &out.CreatedAt, &out.UpdatedAt)
+	if err != nil {
+		return nil, err
+	}
+	if ex.Valid {
+		out.ExcalidrawID = &ex.String
+	}
+	return &out, nil
+}
+
+// createDeviceTx is a tx-aware variant of CreateDevice used by
+// ApplyTemplate so seeding the template's devices + their ports stays
+// inside one atomic apply.
+//
+// Validation is intentionally lighter than CreateDevice: callers (only
+// ApplyTemplate today) hold a tx on the single SQLite connection, so
+// any "validate by reading from s.db" call would deadlock. The template's
+// device_type_id + frame_id come from already-validated template rows,
+// and SQLite FK constraints catch any genuine corruption on INSERT
+// (mapped to ErrInvalidInput by mapWriteErr).
+func (s *Store) createDeviceTx(tx *sql.Tx, projectID int64, d DeviceCreate) (*Device, error) {
+	name := strings.TrimSpace(d.Name)
+	if name == "" {
+		return nil, fmt.Errorf("%w: name is required", ErrInvalidInput)
+	}
+	if d.Width <= 0 || d.Height <= 0 {
+		return nil, fmt.Errorf("%w: width and height must be positive", ErrInvalidInput)
+	}
+	color := strings.TrimSpace(d.Color)
+	if color == "" {
+		color = "#1e1e1e"
+	}
+	res, err := tx.Exec(
+		`INSERT INTO devices (project_id, frame_id, type_id, name, color, x, y, width, height)
+		 VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?)`,
+		projectID, nullableInt64(d.FrameID), nullableInt64(d.TypeID),
+		name, color, d.X, d.Y, d.Width, d.Height,
+	)
+	if err != nil {
+		return nil, mapWriteErr(err)
+	}
+	deviceID, _ := res.LastInsertId()
+	if d.TypeID != nil {
+		if err := s.seedPortsFromType(tx, projectID, deviceID, *d.TypeID, d.Width, d.Height); err != nil {
+			return nil, err
+		}
+	}
+	// Read back via the public store path is fine — the row exists in
+	// the in-flight tx and SQLite sees its own writes within the tx.
+	// Use a sub-helper that takes the tx executor for clean isolation.
+	return s.readDeviceTx(tx, projectID, deviceID)
+}
+
+func (s *Store) readDeviceTx(ex execer, projectID, id int64) (*Device, error) {
+	var d Device
+	var frame, typeID sql.NullInt64
+	var ex2 sql.NullString
+	err := ex.QueryRow(
+		`SELECT id, project_id, frame_id, type_id, name, color, x, y, width, height, excalidraw_id, created_at, updated_at
+		 FROM devices WHERE id = ? AND project_id = ?`, id, projectID,
+	).Scan(&d.ID, &d.ProjectID, &frame, &typeID, &d.Name, &d.Color, &d.X, &d.Y, &d.Width, &d.Height,
+		&ex2, &d.CreatedAt, &d.UpdatedAt)
+	if errors.Is(err, sql.ErrNoRows) {
+		return nil, ErrNotFound
+	}
+	if err != nil {
+		return nil, err
+	}
+	if frame.Valid {
+		v := frame.Int64
+		d.FrameID = &v
+	}
+	if typeID.Valid {
+		v := typeID.Int64
+		d.TypeID = &v
+	}
+	if ex2.Valid {
+		d.ExcalidrawID = &ex2.String
+	}
+	return &d, nil
+}

internal/db/solver.go

@@ -0,0 +1,509 @@
+package db
+
+import (
+	"database/sql"
+	"fmt"
+	"sort"
+)
+
+// Solve runs the v0 algorithm (design v4.1 §5b.2) against the project.
+// If preview is true, no DB writes happen — the function returns the
+// diff it WOULD apply. If preview is false, the diff is applied in a
+// single transaction.
+//
+// Algorithm:
+//   1. Read all auto cables, manual cables, ports, requirements.
+//   2. Reserve ports used by manual cables (auto=0) so the solver
+//      doesn't reuse them.
+//   3. For each requirement (must_connect DESC, id ASC):
+//        - Resolve cable type: preferred, or T = port-types(from) ∩
+//          port-types(to). |T|==1 → that. |T|>1 → unsatisfied (ambiguous).
+//          |T|==0 → unsatisfied (no compat type).
+//        - Find lowest-id free port on each side. None → unsatisfied
+//          (no free port). Reserve both.
+//        - Stage an "add cable {from_port, to_port, type, auto=1}".
+//   4. Endpoint-pair bundle: any pair of device endpoints with ≥ 2
+//      staged cables becomes an auto bundle.
+//   5. Diff against existing auto cables/bundles: removed = existing
+//      auto rows not in the staged set; kept = those that match by
+//      (from_port, to_port, type); add = remaining staged rows.
+func (s *Store) Solve(projectID int64, preview bool) (*SolveResult, error) {
+	res := &SolveResult{
+		CablesAdded:    []Cable{},
+		CablesKept:     []int64{},
+		CablesRemoved:  []int64{},
+		BundlesAdded:   []Bundle{},
+		BundlesRemoved: []int64{},
+		Unsatisfied:    []UnsatisfiedReq{},
+		Warnings:       []string{},
+	}
+
+	if _, err := s.GetProject(projectID); err != nil {
+		return nil, err
+	}
+	devices, err := s.ListDevices(projectID, nil)
+	if err != nil {
+		return nil, err
+	}
+	ports, err := s.ListPortsForProject(projectID)
+	if err != nil {
+		return nil, err
+	}
+	cables, err := s.ListCables(projectID)
+	if err != nil {
+		return nil, err
+	}
+	reqs, err := s.ListConnectionRequirements(projectID)
+	if err != nil {
+		return nil, err
+	}
+	bundles, err := s.ListBundles(projectID)
+	if err != nil {
+		return nil, err
+	}
+
+	// Index ports by (device_id, type_id), sorted by id (deterministic).
+	portsByDevice := map[int64][]Port{}
+	for _, p := range ports {
+		portsByDevice[p.DeviceID] = append(portsByDevice[p.DeviceID], p)
+	}
+	for did := range portsByDevice {
+		sort.SliceStable(portsByDevice[did], func(i, j int) bool {
+			return portsByDevice[did][i].ID < portsByDevice[did][j].ID
+		})
+	}
+	deviceByID := map[int64]Device{}
+	for _, d := range devices {
+		deviceByID[d.ID] = d
+	}
+
+	// Reserve ports used by manual cables.
+	usedPorts := map[int64]bool{}
+	autoCablesByID := map[int64]Cable{}
+	for _, c := range cables {
+		if c.Auto {
+			autoCablesByID[c.ID] = c
+			continue
+		}
+		if c.FromPortID != nil {
+			usedPorts[*c.FromPortID] = true
+		}
+		if c.ToPortID != nil {
+			usedPorts[*c.ToPortID] = true
+		}
+	}
+
+	// Sort requirements: must_connect DESC, id ASC.
+	rs := append([]ConnectionRequirement{}, reqs...)
+	sort.SliceStable(rs, func(i, j int) bool {
+		if rs[i].MustConnect != rs[j].MustConnect {
+			return rs[i].MustConnect
+		}
+		return rs[i].ID < rs[j].ID
+	})
+
+	type staged struct {
+		typeID       int64
+		fromPortID   int64
+		toPortID     int64
+		fromDeviceID int64
+		toDeviceID   int64
+	}
+	var staging []staged
+
+	for _, r := range rs {
+		_, fromOK := deviceByID[r.FromDeviceID]
+		_, toOK := deviceByID[r.ToDeviceID]
+		if !fromOK || !toOK {
+			// Shouldn't happen (FK CASCADE removes the row when a device
+			// goes), but be defensive.
+			continue
+		}
+
+		// Resolve cable type.
+		var typeID int64
+		if r.PreferredCableTypeID != nil {
+			typeID = *r.PreferredCableTypeID
+		} else {
+			fromTypes := map[int64]bool{}
+			for _, p := range portsByDevice[r.FromDeviceID] {
+				fromTypes[p.TypeID] = true
+			}
+			candidates := []int64{}
+			for _, p := range portsByDevice[r.ToDeviceID] {
+				if fromTypes[p.TypeID] {
+					// Add unique.
+					already := false
+					for _, c := range candidates {
+						if c == p.TypeID {
+							already = true
+							break
+						}
+					}
+					if !already {
+						candidates = append(candidates, p.TypeID)
+					}
+				}
+			}
+			if len(candidates) == 0 {
+				if r.MustConnect {
+					res.Unsatisfied = append(res.Unsatisfied, UnsatisfiedReq{
+						RequirementID: r.ID,
+						Reason:        "no compatible cable type — devices share no port-type",
+					})
+				}
+				continue
+			}
+			if len(candidates) > 1 {
+				if r.MustConnect {
+					res.Unsatisfied = append(res.Unsatisfied, UnsatisfiedReq{
+						RequirementID: r.ID,
+						Reason:        "ambiguous cable type — specify preferred_cable_type_id",
+					})
+				}
+				continue
+			}
+			typeID = candidates[0]
+		}
+
+		// Pick lowest-id free port of `typeID` on each side.
+		pickFree := func(deviceID, t int64) *int64 {
+			for _, p := range portsByDevice[deviceID] {
+				if p.TypeID != t {
+					continue
+				}
+				if usedPorts[p.ID] {
+					continue
+				}
+				return &p.ID
+			}
+			return nil
+		}
+		fromPort := pickFree(r.FromDeviceID, typeID)
+		toPort := pickFree(r.ToDeviceID, typeID)
+		if fromPort == nil || toPort == nil {
+			if r.MustConnect {
+				side := ""
+				if fromPort == nil && toPort == nil {
+					side = ""
+				} else if fromPort == nil {
+					side = "from"
+				} else {
+					side = "to"
+				}
+				typeName := ""
+				if ct, err := s.GetCableType(typeID); err == nil {
+					typeName = ct.Name
+				}
+				res.Unsatisfied = append(res.Unsatisfied, UnsatisfiedReq{
+					RequirementID: r.ID,
+					Reason:        fmt.Sprintf("no free %s port", typeName),
+					WhichSide:     side,
+					CableType:     typeName,
+				})
+			}
+			continue
+		}
+		usedPorts[*fromPort] = true
+		usedPorts[*toPort] = true
+		staging = append(staging, staged{
+			typeID: typeID, fromPortID: *fromPort, toPortID: *toPort,
+			fromDeviceID: r.FromDeviceID, toDeviceID: r.ToDeviceID,
+		})
+	}
+
+	// Match staged → existing auto cables by (typeID, fromPortID, toPortID)
+	// or its reverse. Anything matched is "kept"; the rest of auto cables
+	// is "removed". Unmatched staged entries become "added".
+	type sigKey struct{ typeID, a, b int64 }
+	matched := map[int64]bool{} // existing auto cable IDs that match
+	sigToAuto := map[sigKey]int64{}
+	for id, c := range autoCablesByID {
+		if c.FromPortID == nil || c.ToPortID == nil {
+			continue
+		}
+		a, b := *c.FromPortID, *c.ToPortID
+		if a > b {
+			a, b = b, a
+		}
+		sigToAuto[sigKey{c.TypeID, a, b}] = id
+	}
+	var toAdd []staged
+	for _, st := range staging {
+		a, b := st.fromPortID, st.toPortID
+		if a > b {
+			a, b = b, a
+		}
+		if existingID, ok := sigToAuto[sigKey{st.typeID, a, b}]; ok {
+			matched[existingID] = true
+			res.CablesKept = append(res.CablesKept, existingID)
+			continue
+		}
+		toAdd = append(toAdd, st)
+	}
+	for id := range autoCablesByID {
+		if !matched[id] {
+			res.CablesRemoved = append(res.CablesRemoved, id)
+		}
+	}
+	sort.Slice(res.CablesKept, func(i, j int) bool { return res.CablesKept[i] < res.CablesKept[j] })
+	sort.Slice(res.CablesRemoved, func(i, j int) bool { return res.CablesRemoved[i] < res.CablesRemoved[j] })
+
+	// Endpoint-pair bundling for the final set of auto cables (kept + added).
+	// Group by unordered (deviceA, deviceB). Build the map of port_id → device_id
+	// for fast lookup.
+	portToDevice := map[int64]int64{}
+	for _, p := range ports {
+		portToDevice[p.ID] = p.DeviceID
+	}
+	type pairKey struct{ a, b int64 }
+	pairGroup := map[pairKey][]string{} // staged-or-kept tags (we just count)
+	pairOrder := []pairKey{}            // first-seen order
+
+	// We'll need the final list of cables-after-apply (with their IDs) to
+	// build bundles. For preview, kept IDs are real, added IDs are zero;
+	// for apply, we'll re-bundle after inserts.
+
+	if preview {
+		// In preview mode, "kept" IDs are real cables; "added" are
+		// staged. We still compute bundles_added so the UI can show
+		// which cable groups will be bundled. Bundles_added carry
+		// `CableIDs: []` for the staged entries because they don't
+		// have IDs yet — the UI maps by position. cables_kept that
+		// belong to a bundle group also list their existing ids.
+		// In short, slot every staged cable into the same pair bucket
+		// + the kept cables.
+		for _, st := range staging {
+			da, db := st.fromDeviceID, st.toDeviceID
+			if da > db {
+				da, db = db, da
+			}
+			pk := pairKey{da, db}
+			if _, ok := pairGroup[pk]; !ok {
+				pairOrder = append(pairOrder, pk)
+			}
+			pairGroup[pk] = append(pairGroup[pk], "")
+		}
+		// Materialise preview-shape Cable structs for the added rows.
+		for _, st := range toAdd {
+			c := Cable{
+				ProjectID:  projectID,
+				TypeID:     st.typeID,
+				FromPortID: ptr(st.fromPortID),
+				ToPortID:   ptr(st.toPortID),
+				Auto:       true,
+			}
+			res.CablesAdded = append(res.CablesAdded, c)
+		}
+		for _, pk := range pairOrder {
+			if len(pairGroup[pk]) < 2 {
+				continue
+			}
+			a := deviceByID[pk.a].Name
+			b := deviceByID[pk.b].Name
+			res.BundlesAdded = append(res.BundlesAdded, Bundle{
+				ProjectID: projectID,
+				Name:      a + " ↔ " + b,
+				Auto:      true,
+				CableIDs:  nil, // post-apply only
+			})
+		}
+		// Existing auto bundles all "would be removed" since we rebuild
+		// from scratch each solve (slice-6 v0 is wholesale-replace).
+		for _, b := range bundles {
+			if b.Auto {
+				res.BundlesRemoved = append(res.BundlesRemoved, b.ID)
+			}
+		}
+		return res, nil
+	}
+
+	// Apply mode: open a transaction, delete removed auto cables + auto
+	// bundles, insert added cables, re-bundle by endpoint pair.
+	tx, err := s.db.Begin()
+	if err != nil {
+		return nil, err
+	}
+	defer tx.Rollback()
+
+	// Delete obsolete auto bundles (we'll rebuild).
+	if _, err := tx.Exec(
+		`DELETE FROM bundles WHERE project_id = ? AND auto = 1`, projectID,
+	); err != nil {
+		return nil, err
+	}
+	for _, b := range bundles {
+		if b.Auto {
+			res.BundlesRemoved = append(res.BundlesRemoved, b.ID)
+		}
+	}
+
+	// Delete removed auto cables.
+	for _, id := range res.CablesRemoved {
+		if _, err := tx.Exec(
+			`DELETE FROM cables WHERE id = ? AND project_id = ?`, id, projectID,
+		); err != nil {
+			return nil, err
+		}
+	}
+
+	// Insert added cables. Track new ids by their staged signature for
+	// bundle wiring.
+	type addedRow struct {
+		id           int64
+		staged       staged
+	}
+	addedRows := []addedRow{}
+	for _, st := range toAdd {
+		c, err := s.createCable(tx, projectID, CableCreate{
+			TypeID: st.typeID,
+			From:   CableEndpoint{PortID: &st.fromPortID},
+			To:     CableEndpoint{PortID: &st.toPortID},
+			Auto:   true,
+		})
+		if err != nil {
+			return nil, err
+		}
+		res.CablesAdded = append(res.CablesAdded, *c)
+		addedRows = append(addedRows, addedRow{id: c.ID, staged: st})
+	}
+
+	// Re-bundle: all auto cables (kept + added) grouped by endpoint pair.
+	// First, collect cable IDs per (deviceA, deviceB) — both kept (from
+	// matched map) and added.
+	groups := map[pairKey][]int64{}
+	order := []pairKey{}
+	addToGroup := func(da, db, cid int64) {
+		if da > db {
+			da, db = db, da
+		}
+		pk := pairKey{da, db}
+		if _, ok := groups[pk]; !ok {
+			order = append(order, pk)
+		}
+		groups[pk] = append(groups[pk], cid)
+	}
+	for id, c := range autoCablesByID {
+		if !matched[id] {
+			continue
+		}
+		if c.FromPortID == nil || c.ToPortID == nil {
+			continue
+		}
+		da := portToDevice[*c.FromPortID]
+		db := portToDevice[*c.ToPortID]
+		if da == 0 || db == 0 {
+			continue
+		}
+		addToGroup(da, db, id)
+	}
+	for _, ar := range addedRows {
+		addToGroup(ar.staged.fromDeviceID, ar.staged.toDeviceID, ar.id)
+	}
+
+	for _, pk := range order {
+		ids := groups[pk]
+		if len(ids) < 2 {
+			continue
+		}
+		a := deviceByID[pk.a].Name
+		b := deviceByID[pk.b].Name
+		bundle, err := s.createBundle(tx, projectID, BundleCreate{
+			Name:     a + " ↔ " + b,
+			CableIDs: ids,
+			Auto:     true,
+		}, false)
+		if err != nil {
+			return nil, err
+		}
+		res.BundlesAdded = append(res.BundlesAdded, *bundle)
+	}
+
+	if err := tx.Commit(); err != nil {
+		return nil, err
+	}
+	return res, nil
+}
+
+func ptr[T any](v T) *T { return &v }
+
+// PortsAndResolve adds a port to a device + re-runs Solve in one tx.
+// Used by the inspector's "+ Add <type> port and re-solve" quick-fix.
+type PortsAndResolveResult struct {
+	Port  Port         `json:"port"`
+	Solve *SolveResult `json:"solve"`
+}
+
+func (s *Store) PortsAndResolve(projectID, deviceID int64, typeID int64, label string, xOff, yOff float64) (*PortsAndResolveResult, error) {
+	d, err := s.GetDevice(projectID, deviceID)
+	if err != nil {
+		return nil, err
+	}
+	if _, err := s.GetCableType(typeID); err != nil {
+		if err == sql.ErrNoRows {
+			return nil, fmt.Errorf("%w: cable type %d not found", ErrInvalidInput, typeID)
+		}
+	}
+	tx, err := s.db.Begin()
+	if err != nil {
+		return nil, err
+	}
+	defer tx.Rollback()
+	// Default the new port to the bottom edge at the right-most existing offset.
+	if xOff == 0 && yOff == 0 {
+		xOff = d.Width / 2
+		yOff = d.Height
+	}
+	var labelArg any
+	if label != "" {
+		labelArg = label
+	}
+	res, err := tx.Exec(
+		`INSERT INTO ports (project_id, device_id, type_id, label, x_offset, y_offset)
+		 VALUES (?, ?, ?, ?, ?, ?)`,
+		projectID, deviceID, typeID, labelArg, xOff, yOff,
+	)
+	if err != nil {
+		return nil, mapWriteErr(err)
+	}
+	portID, _ := res.LastInsertId()
+	if err := tx.Commit(); err != nil {
+		return nil, err
+	}
+	// Now re-solve outside the tx — Solve manages its own tx for the
+	// apply path. This is a slight relaxation of "single round-trip" — if
+	// the solver run fails the port stays, but that's fine; the port is
+	// what m wanted regardless.
+	solveRes, err := s.Solve(projectID, false)
+	if err != nil {
+		return nil, err
+	}
+	// Re-fetch the port row to return its full shape.
+	port, err := s.getPortByID(portID)
+	if err != nil {
+		return nil, err
+	}
+	return &PortsAndResolveResult{Port: *port, Solve: solveRes}, nil
+}
+
+func (s *Store) getPortByID(id int64) (*Port, error) {
+	var p Port
+	var label, ex sql.NullString
+	err := s.db.QueryRow(
+		`SELECT id, project_id, device_id, type_id, label, x_offset, y_offset,
+		        excalidraw_id, created_at, updated_at
+		 FROM ports WHERE id = ?`, id,
+	).Scan(&p.ID, &p.ProjectID, &p.DeviceID, &p.TypeID, &label,
+		&p.XOffset, &p.YOffset, &ex, &p.CreatedAt, &p.UpdatedAt)
+	if err != nil {
+		return nil, err
+	}
+	if label.Valid {
+		v := label.String
+		p.Label = &v
+	}
+	if ex.Valid {
+		p.ExcalidrawID = &ex.String
+	}
+	return &p, nil
+}

internal/db/solver_test.go

@@ -0,0 +1,329 @@
+package db
+
+import (
+	"testing"
+)
+
+// builtInTypeID returns the id of the named built-in device type.
+func builtInTypeID(t *testing.T, s *Store, name string) int64 {
+	t.Helper()
+	all, _ := s.ListBuiltInDeviceTypes()
+	for _, dt := range all {
+		if dt.Name == name {
+			return dt.ID
+		}
+	}
+	t.Fatalf("built-in %q not found", name)
+	return 0
+}
+
+// ------------------------------------------------------ basic solver wins
+
+func TestSolve_BasicNAStoSwitch(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	nasT := builtInTypeID(t, s, "NAS")
+	swT := builtInTypeID(t, s, "Switch")
+	nas, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "NAS", TypeID: &nasT, X: 0, Y: 0, Width: 100, Height: 35})
+	sw, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "Switch", TypeID: &swT, X: 200, Y: 0, Width: 100, Height: 35})
+	rj45 := int64(5)
+	_, _ = s.CreateConnectionRequirement(p.ID, ConnectionRequirementCreate{
+		FromDeviceID: nas.ID, ToDeviceID: sw.ID, PreferredCableTypeID: &rj45,
+	})
+	res, err := s.Solve(p.ID, false)
+	if err != nil {
+		t.Fatalf("solve: %v", err)
+	}
+	if len(res.CablesAdded) != 1 {
+		t.Fatalf("cables_added len = %d, want 1", len(res.CablesAdded))
+	}
+	if res.CablesAdded[0].TypeID != rj45 {
+		t.Errorf("cable type = %d, want %d (RJ45)", res.CablesAdded[0].TypeID, rj45)
+	}
+	if !res.CablesAdded[0].Auto {
+		t.Errorf("cable.auto should be true")
+	}
+	if len(res.Unsatisfied) != 0 {
+		t.Errorf("unsatisfied should be empty; got %+v", res.Unsatisfied)
+	}
+}
+
+func TestSolve_AmbiguousType_RequirementUnsatisfied(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	// Both PCs have Power + USB + HDMI + RJ45 → multiple types match.
+	pcT := builtInTypeID(t, s, "PC")
+	a, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "A", TypeID: &pcT, X: 0, Y: 0, Width: 100, Height: 35})
+	b, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "B", TypeID: &pcT, X: 200, Y: 0, Width: 100, Height: 35})
+	_, _ = s.CreateConnectionRequirement(p.ID, ConnectionRequirementCreate{
+		FromDeviceID: a.ID, ToDeviceID: b.ID, // no PreferredCableTypeID
+	})
+	res, _ := s.Solve(p.ID, true)
+	if len(res.CablesAdded) != 0 {
+		t.Errorf("ambiguous: should not add cables, got %d", len(res.CablesAdded))
+	}
+	if len(res.Unsatisfied) != 1 || res.Unsatisfied[0].Reason == "" {
+		t.Errorf("expected 1 unsatisfied req with non-empty reason; got %+v", res.Unsatisfied)
+	}
+}
+
+func TestSolve_NoFreePort_RequirementUnsatisfied(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	// Mouse only has 1 USB port. Two USB requirements against it should
+	// leave one unsatisfied.
+	mouseT := builtInTypeID(t, s, "Mouse")
+	pcT := builtInTypeID(t, s, "PC")
+	mouse, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "Mouse", TypeID: &mouseT, X: 0, Y: 0, Width: 100, Height: 35})
+	pc1, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "PC1", TypeID: &pcT, X: 200, Y: 0, Width: 100, Height: 35})
+	pc2, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "PC2", TypeID: &pcT, X: 400, Y: 0, Width: 100, Height: 35})
+	usb := int64(2)
+	_, _ = s.CreateConnectionRequirement(p.ID, ConnectionRequirementCreate{
+		FromDeviceID: mouse.ID, ToDeviceID: pc1.ID, PreferredCableTypeID: &usb,
+	})
+	_, _ = s.CreateConnectionRequirement(p.ID, ConnectionRequirementCreate{
+		FromDeviceID: mouse.ID, ToDeviceID: pc2.ID, PreferredCableTypeID: &usb,
+	})
+	res, _ := s.Solve(p.ID, true)
+	if len(res.CablesAdded) != 1 {
+		t.Errorf("expected 1 cable to land (one mouse USB), got %d", len(res.CablesAdded))
+	}
+	if len(res.Unsatisfied) != 1 {
+		t.Errorf("expected 1 unsatisfied; got %d (%+v)", len(res.Unsatisfied), res.Unsatisfied)
+	}
+}
+
+// ----------------------------------------------- preview vs apply semantics
+
+func TestSolve_PreviewDoesNotWrite(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	nasT := builtInTypeID(t, s, "NAS")
+	swT := builtInTypeID(t, s, "Switch")
+	nas, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "NAS", TypeID: &nasT, X: 0, Y: 0, Width: 100, Height: 35})
+	sw, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "Switch", TypeID: &swT, X: 200, Y: 0, Width: 100, Height: 35})
+	rj45 := int64(5)
+	_, _ = s.CreateConnectionRequirement(p.ID, ConnectionRequirementCreate{
+		FromDeviceID: nas.ID, ToDeviceID: sw.ID, PreferredCableTypeID: &rj45,
+	})
+	_, _ = s.Solve(p.ID, true) // preview
+	cables, _ := s.ListCables(p.ID)
+	if len(cables) != 0 {
+		t.Errorf("preview wrote %d cables; want 0", len(cables))
+	}
+}
+
+func TestSolve_ApplyThenIdempotent(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	nasT := builtInTypeID(t, s, "NAS")
+	swT := builtInTypeID(t, s, "Switch")
+	nas, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "NAS", TypeID: &nasT, X: 0, Y: 0, Width: 100, Height: 35})
+	sw, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "Switch", TypeID: &swT, X: 200, Y: 0, Width: 100, Height: 35})
+	rj45 := int64(5)
+	_, _ = s.CreateConnectionRequirement(p.ID, ConnectionRequirementCreate{
+		FromDeviceID: nas.ID, ToDeviceID: sw.ID, PreferredCableTypeID: &rj45,
+	})
+	r1, _ := s.Solve(p.ID, false)
+	if len(r1.CablesAdded) != 1 {
+		t.Fatalf("first apply: cables_added=%d, want 1", len(r1.CablesAdded))
+	}
+	r2, _ := s.Solve(p.ID, false)
+	if len(r2.CablesAdded) != 0 {
+		t.Errorf("second apply: cables_added=%d, want 0 (idempotent)", len(r2.CablesAdded))
+	}
+	if len(r2.CablesKept) != 1 {
+		t.Errorf("second apply: cables_kept=%d, want 1", len(r2.CablesKept))
+	}
+}
+
+func TestSolve_ManualCableReservesPort(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	mouseT := builtInTypeID(t, s, "Mouse")
+	pcT := builtInTypeID(t, s, "PC")
+	mouse, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "Mouse", TypeID: &mouseT, X: 0, Y: 0, Width: 100, Height: 35})
+	pc, _ := s.CreateDevice(p.ID, DeviceCreate{Name: "PC", TypeID: &pcT, X: 200, Y: 0, Width: 100, Height: 35})
+
+	// Manual cable USB Mouse↔PC: claims the only mouse USB port.
+	ports, _ := s.ListPortsForProject(p.ID)
+	var mouseUSB, pcUSB int64
+	for _, prt := range ports {
+		if prt.DeviceID == mouse.ID && prt.TypeID == 2 {
+			mouseUSB = prt.ID
+		}
+		if prt.DeviceID == pc.ID && prt.TypeID == 2 {
+			pcUSB = prt.ID
+			break
+		}
+	}
+	usb := int64(2)
+	_, _ = s.CreateCable(p.ID, CableCreate{
+		TypeID: usb,
+		From:   CableEndpoint{PortID: &mouseUSB},
+		To:     CableEndpoint{PortID: &pcUSB},
+		Auto:   false,
+	})
+
+	// Now add a requirement that also wants USB on the mouse → no free port.
+	_, _ = s.CreateConnectionRequirement(p.ID, ConnectionRequirementCreate{
+		FromDeviceID: mouse.ID, ToDeviceID: pc.ID, PreferredCableTypeID: &usb,
+	})
+	res, _ := s.Solve(p.ID, true)
+	if len(res.Unsatisfied) == 0 {
+		t.Errorf("expected unsatisfied req (manual cable should reserve the only mouse USB port)")
+	}
+}
+
+// -------------------------------------------------------- setup templates
+
+func TestApplyTemplate_LivingRoom(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	tmpls, _ := s.ListSetupTemplates()
+	var lr SetupTemplate
+	for _, tm := range tmpls {
+		if tm.Name == "Living Room" {
+			lr = tm
+			break
+		}
+	}
+	if lr.ID == 0 {
+		t.Fatal("Living Room template not seeded")
+	}
+	res, err := s.ApplyTemplate(p.ID, lr.ID, ApplyTemplateOptions{})
+	if err != nil {
+		t.Fatalf("apply: %v", err)
+	}
+	if len(res.DevicesAdded) != 3 {
+		t.Errorf("devices added = %d, want 3 (TV, Soundbar, ChromeCast)", len(res.DevicesAdded))
+	}
+	if len(res.RequirementsAdded) != 2 {
+		t.Errorf("requirements added = %d, want 2 (TV↔Soundbar, TV↔ChromeCast)", len(res.RequirementsAdded))
+	}
+	// Ports were seeded as part of the device creation.
+	ports, _ := s.ListPortsForProject(p.ID)
+	if len(ports) < 6 { // TV(3) + Soundbar(2) + ChromeCast(2) = 7
+		t.Errorf("ports after template apply = %d, expected ≥6", len(ports))
+	}
+}
+
+func TestApplyTemplate_HomeOffice_ThenSolve(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	tmpls, _ := s.ListSetupTemplates()
+	var ho SetupTemplate
+	for _, tm := range tmpls {
+		if tm.Name == "Home Office" {
+			ho = tm
+			break
+		}
+	}
+	if _, err := s.ApplyTemplate(p.ID, ho.ID, ApplyTemplateOptions{}); err != nil {
+		t.Fatalf("apply: %v", err)
+	}
+	res, err := s.Solve(p.ID, false)
+	if err != nil {
+		t.Fatalf("solve: %v", err)
+	}
+	if len(res.CablesAdded) != 3 {
+		t.Errorf("Home Office should solve to 3 cables (PC↔Screen, PC↔Keyboard, PC↔Mouse); got %d", len(res.CablesAdded))
+	}
+	if len(res.Unsatisfied) != 0 {
+		t.Errorf("unsatisfied = %+v, want []", res.Unsatisfied)
+	}
+}
+
+func TestApplyTemplate_CreatesFrameAndPlacesDevicesInside(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	tmpls, _ := s.ListSetupTemplates()
+	var lr SetupTemplate
+	for _, tm := range tmpls {
+		if tm.Name == "Living Room" {
+			lr = tm
+			break
+		}
+	}
+	res, err := s.ApplyTemplate(p.ID, lr.ID, ApplyTemplateOptions{})
+	if err != nil {
+		t.Fatalf("apply: %v", err)
+	}
+	if len(res.FramesAdded) != 1 {
+		t.Fatalf("frames added = %d, want 1", len(res.FramesAdded))
+	}
+	frame := res.FramesAdded[0]
+	if frame.Name != "Living Room" {
+		t.Errorf("frame name = %q, want %q", frame.Name, "Living Room")
+	}
+	for _, d := range res.DevicesAdded {
+		if d.FrameID == nil || *d.FrameID != frame.ID {
+			t.Errorf("device %q: frame_id = %v, want %d", d.Name, d.FrameID, frame.ID)
+		}
+		// Device top-left should be inside the frame rect.
+		if d.X < frame.X || d.X+d.Width > frame.X+frame.Width {
+			t.Errorf("device %q: x=%v width=%v outside frame [%v..%v]", d.Name, d.X, d.Width, frame.X, frame.X+frame.Width)
+		}
+		if d.Y < frame.Y || d.Y+d.Height > frame.Y+frame.Height {
+			t.Errorf("device %q: y=%v height=%v outside frame [%v..%v]", d.Name, d.Y, d.Height, frame.Y, frame.Y+frame.Height)
+		}
+	}
+	// No two devices share the same (X, Y) — the grid layout spreads them out.
+	seen := map[[2]float64]string{}
+	for _, d := range res.DevicesAdded {
+		key := [2]float64{d.X, d.Y}
+		if prev, ok := seen[key]; ok {
+			t.Errorf("devices %q and %q share grid cell (%v, %v)", prev, d.Name, d.X, d.Y)
+		}
+		seen[key] = d.Name
+	}
+}
+
+func TestApplyTemplate_FrameNameSuffixOnCollision(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	// Pre-create a frame called "Living Room" so the template's frame name collides.
+	_, _ = s.CreateFrame(p.ID, FrameCreate{Name: "Living Room", X: 0, Y: 0, Width: 100, Height: 100})
+	tmpls, _ := s.ListSetupTemplates()
+	var lr SetupTemplate
+	for _, tm := range tmpls {
+		if tm.Name == "Living Room" {
+			lr = tm
+			break
+		}
+	}
+	res, err := s.ApplyTemplate(p.ID, lr.ID, ApplyTemplateOptions{})
+	if err != nil {
+		t.Fatalf("apply: %v", err)
+	}
+	if len(res.FramesAdded) != 1 {
+		t.Fatalf("frames added = %d, want 1", len(res.FramesAdded))
+	}
+	if res.FramesAdded[0].Name != "Living Room 2" {
+		t.Errorf("frame name = %q, want %q (suffixed)", res.FramesAdded[0].Name, "Living Room 2")
+	}
+}
+
+func TestApplyTemplate_NameCollisionSkipped(t *testing.T) {
+	s := newTestStore(t)
+	p, _ := s.CreateProject("LOFT", "", "")
+	pcT := builtInTypeID(t, s, "PC")
+	// Pre-create a device called "PC" so the Home Office template's PC collides.
+	_, _ = s.CreateDevice(p.ID, DeviceCreate{Name: "PC", TypeID: &pcT, X: 0, Y: 0, Width: 100, Height: 35})
+
+	tmpls, _ := s.ListSetupTemplates()
+	var ho SetupTemplate
+	for _, tm := range tmpls {
+		if tm.Name == "Home Office" {
+			ho = tm
+			break
+		}
+	}
+	res, _ := s.ApplyTemplate(p.ID, ho.ID, ApplyTemplateOptions{})
+	if len(res.SkippedDevices) == 0 {
+		t.Errorf("expected at least one skipped device for name collision; got %+v", res.SkippedDevices)
+	}
+	if len(res.RequirementsSkipped) == 0 {
+		t.Errorf("PC requirements should be skipped when PC device skipped; got %+v", res.RequirementsSkipped)
+	}
+}

internal/db/store.go

@@ -167,15 +167,46 @@ func (s *Store) Snapshot(id int64) (*Snapshot, error) {
 	if err != nil {
 		return nil, err
 	}
+	ios, err := s.ListIOMarkers(id)
+	if err != nil {
+		return nil, err
+	}
+	ports, err := s.ListPortsForProject(id)
+	if err != nil {
+		return nil, err
+	}
+	reqs, err := s.ListConnectionRequirements(id)
+	if err != nil {
+		return nil, err
+	}
+	cables, err := s.ListCables(id)
+	if err != nil {
+		return nil, err
+	}
+	bundles, err := s.ListBundles(id)
+	if err != nil {
+		return nil, err
+	}
+	clamps, err := s.ListClamps(id)
+	if err != nil {
+		return nil, err
+	}
+	cableClamps, err := s.ListCableClamps(id)
+	if err != nil {
+		return nil, err
+	}
 	return &Snapshot{
-		Project:    *p,
-		Frames:     frames,
-		Devices:    devices,
-		Ports:      []any{},
-		Cables:     []any{},
-		IOMarkers:  []any{},
-		Bundles:    []any{},
-		CableTypes: types,
+		Project:                *p,
+		Frames:                 frames,
+		Devices:                devices,
+		Ports:                  ports,
+		Cables:                 cables,
+		IOMarkers:              ios,
+		Bundles:                bundles,
+		CableTypes:             types,
+		ConnectionRequirements: reqs,
+		Clamps:                 clamps,
+		CableClamps:            cableClamps,
 	}, nil
 }
 

internal/exporter/exporter.go

@@ -0,0 +1,630 @@
+// Package exporter builds an Excalidraw scene JSON from a project
+// snapshot per docs/design.md §4 ("Export — DB → Excalidraw").
+//
+// The exporter is a pure function on a *db.Snapshot — no DB access, no
+// IO — so it's trivial to unit-test against fixtures and gives the
+// caller (the HTTP handler) a clean handoff: build scene → upload.
+package exporter
+
+import (
+	"crypto/rand"
+	"encoding/json"
+	"fmt"
+	"math/big"
+	"sort"
+
+	"mgit.msbls.de/m/cablegui/internal/db"
+)
+
+// Scene is the top-level Excalidraw file format. Keys mirror what the
+// official Excalidraw JSON contains (we only emit the keys mxdrw cares
+// about for rendering — `appState`, `files`, `libraryItems` etc. can be
+// added later if m needs them).
+type Scene struct {
+	Type     string    `json:"type"`
+	Version  int       `json:"version"`
+	Source   string    `json:"source"`
+	Elements []Element `json:"elements"`
+	AppState AppState  `json:"appState"`
+	Files    Files     `json:"files"`
+}
+
+type AppState struct {
+	GridSize       *int   `json:"gridSize"`
+	ViewBackground string `json:"viewBackgroundColor"`
+}
+
+type Files struct{}
+
+// Element is one node in the scene. Excalidraw's wire format has a lot
+// of optional fields; we only emit the ones that matter for the shapes
+// we draw. Extra null/zero fields are fine in Excalidraw (it merges
+// defaults). Pointer fields stay nil-omitted via omitempty so the
+// payload stays clean.
+type Element struct {
+	ID              string       `json:"id"`
+	Type            string       `json:"type"`
+	X               float64      `json:"x"`
+	Y               float64      `json:"y"`
+	Width           float64      `json:"width"`
+	Height          float64      `json:"height"`
+	Angle           float64      `json:"angle"`
+	StrokeColor     string       `json:"strokeColor"`
+	BackgroundColor string       `json:"backgroundColor"`
+	FillStyle       string       `json:"fillStyle"`
+	StrokeWidth     int          `json:"strokeWidth"`
+	StrokeStyle     string       `json:"strokeStyle"`
+	Roughness       int          `json:"roughness"`
+	Opacity         int          `json:"opacity"`
+	GroupIDs        []string     `json:"groupIds"`
+	FrameID         *string      `json:"frameId"`
+	Roundness       *Roundness   `json:"roundness"`
+	Seed            int64        `json:"seed"`
+	Version         int          `json:"version"`
+	VersionNonce    int64        `json:"versionNonce"`
+	IsDeleted       bool         `json:"isDeleted"`
+	BoundElements   []BoundRef   `json:"boundElements,omitempty"`
+	Updated         int64        `json:"updated"`
+	Link            *string      `json:"link"`
+	Locked          bool         `json:"locked"`
+
+	// Element-type-specific extras
+	Name string `json:"name,omitempty"`
+
+	// Text-element fields
+	Text         string `json:"text,omitempty"`
+	FontSize     int    `json:"fontSize,omitempty"`
+	FontFamily   int    `json:"fontFamily,omitempty"`
+	TextAlign    string `json:"textAlign,omitempty"`
+	VerticalAlign string `json:"verticalAlign,omitempty"`
+	ContainerID  *string `json:"containerId,omitempty"`
+	OriginalText string `json:"originalText,omitempty"`
+	LineHeight   float64 `json:"lineHeight,omitempty"`
+
+	// Arrow-element fields
+	Points       [][2]float64  `json:"points,omitempty"`
+	StartBinding *Binding      `json:"startBinding,omitempty"`
+	EndBinding   *Binding      `json:"endBinding,omitempty"`
+	StartArrowhead *string     `json:"startArrowhead,omitempty"`
+	EndArrowhead   *string     `json:"endArrowhead,omitempty"`
+	LastCommittedPoint *[2]float64 `json:"lastCommittedPoint,omitempty"`
+}
+
+type Roundness struct {
+	Type int `json:"type"`
+}
+
+type BoundRef struct {
+	ID   string `json:"id"`
+	Type string `json:"type"`
+}
+
+type Binding struct {
+	ElementID string   `json:"elementId"`
+	Focus     float64  `json:"focus"`
+	Gap       float64  `json:"gap"`
+}
+
+// IDAssignment is the result of running BuildScene: the scene to upload
+// + the per-row excalidraw_id assignments that the caller should
+// persist so the next export reuses the same ids (Excalidraw collab
+// cursors / comments / undo history survive that way; design §4.2).
+type IDAssignment struct {
+	Frames    map[int64]string `json:"frames"`
+	Devices   map[int64]string `json:"devices"`
+	Ports     map[int64]string `json:"ports"`
+	IOMarkers map[int64]string `json:"io_markers"`
+	Cables    map[int64]string `json:"cables"`
+	Clamps    map[int64]string `json:"clamps"`
+}
+
+// BuildScene transforms a project snapshot into an Excalidraw Scene +
+// the id-assignment side-table.
+//
+// nowMilli is the Updated timestamp (one millisecond stamp for every
+// element keeps re-exports consistent — mxdrw treats wildly-different
+// updateds as edit-noise).
+//
+// genID is a 21-char ID factory. Tests pass a deterministic generator
+// to lock element ids down across asserts. Production uses Generate21.
+func BuildScene(snap *db.Snapshot, nowMilli int64, genID func() string) (*Scene, *IDAssignment) {
+	a := &IDAssignment{
+		Frames:    map[int64]string{},
+		Devices:   map[int64]string{},
+		Ports:     map[int64]string{},
+		IOMarkers: map[int64]string{},
+		Cables:    map[int64]string{},
+		Clamps:    map[int64]string{},
+	}
+	// idFor: reuse the existing excalidraw_id if present, else mint one.
+	idFor := func(existing *string) string {
+		if existing != nil && *existing != "" {
+			return *existing
+		}
+		return genID()
+	}
+
+	cableTypeColor := map[int64]string{}
+	for _, t := range snap.CableTypes {
+		cableTypeColor[t.ID] = t.Color
+	}
+
+	// We'll need: device-id → element-id, port-id → element-id, io-id → element-id
+	// for binding arrows.
+	deviceElID := map[int64]string{}
+	portElID := map[int64]string{}
+	ioElID := map[int64]string{}
+	frameElID := map[int64]string{}
+
+	var els []Element
+
+	// Frames first (Excalidraw renders later elements on top; frames are
+	// containers that go on the bottom).
+	for _, f := range snap.Frames {
+		elID := idFor(f.ExcalidrawID)
+		a.Frames[f.ID] = elID
+		frameElID[f.ID] = elID
+		els = append(els, Element{
+			ID:              elID,
+			Type:            "frame",
+			X:               f.X,
+			Y:               f.Y,
+			Width:           f.Width,
+			Height:          f.Height,
+			StrokeColor:     "#bbbbbb",
+			BackgroundColor: "transparent",
+			FillStyle:       "solid",
+			StrokeWidth:     2,
+			StrokeStyle:     "solid",
+			Roughness:       0,
+			Opacity:         100,
+			GroupIDs:        []string{},
+			Seed:            randInt(),
+			Version:         1,
+			VersionNonce:    randInt(),
+			Updated:         nowMilli,
+			Name:            f.Name,
+		})
+	}
+
+	// Devices: rectangle + bound text with the device's name. Excalidraw
+	// uses a `containerId` pointer on the text to bind it to the rect,
+	// and `boundElements` on the rect to point back at the text.
+	for _, d := range snap.Devices {
+		rectID := idFor(d.ExcalidrawID)
+		a.Devices[d.ID] = rectID
+		deviceElID[d.ID] = rectID
+		textID := genID()
+		var frameRef *string
+		if d.FrameID != nil {
+			if v, ok := frameElID[*d.FrameID]; ok {
+				frameRef = &v
+			}
+		}
+		// Rect
+		els = append(els, Element{
+			ID:              rectID,
+			Type:            "rectangle",
+			X:               d.X,
+			Y:               d.Y,
+			Width:           d.Width,
+			Height:          d.Height,
+			StrokeColor:     d.Color,
+			BackgroundColor: "transparent",
+			FillStyle:       "solid",
+			StrokeWidth:     2,
+			StrokeStyle:     "solid",
+			Roughness:       0,
+			Opacity:         100,
+			GroupIDs:        []string{},
+			FrameID:         frameRef,
+			Roundness:       &Roundness{Type: 3},
+			Seed:            randInt(),
+			Version:         1,
+			VersionNonce:    randInt(),
+			Updated:         nowMilli,
+			BoundElements:   []BoundRef{{ID: textID, Type: "text"}},
+		})
+		// Bound text — name centered on the rect.
+		els = append(els, Element{
+			ID:              textID,
+			Type:            "text",
+			X:               d.X,
+			Y:               d.Y + d.Height/2 - 8,
+			Width:           d.Width,
+			Height:          16,
+			StrokeColor:     d.Color,
+			BackgroundColor: "transparent",
+			FillStyle:       "solid",
+			StrokeWidth:     2,
+			StrokeStyle:     "solid",
+			Roughness:       0,
+			Opacity:         100,
+			GroupIDs:        []string{},
+			FrameID:         frameRef,
+			Seed:            randInt(),
+			Version:         1,
+			VersionNonce:    randInt(),
+			Updated:         nowMilli,
+			Text:            d.Name,
+			OriginalText:    d.Name,
+			FontSize:        16,
+			FontFamily:      1,
+			TextAlign:       "center",
+			VerticalAlign:   "middle",
+			ContainerID:     &rectID,
+			LineHeight:      1.25,
+		})
+	}
+
+	// Ports — small ellipses at device.x + port.x_offset (positional,
+	// not containerId-bound per the seed drawing's grammar; design §4.1).
+	for _, p := range snap.Ports {
+		elID := idFor(p.ExcalidrawID)
+		a.Ports[p.ID] = elID
+		portElID[p.ID] = elID
+		// Locate the parent device for absolute pos + frame ref.
+		var dev *db.Device
+		for i := range snap.Devices {
+			if snap.Devices[i].ID == p.DeviceID {
+				dev = &snap.Devices[i]
+				break
+			}
+		}
+		if dev == nil {
+			continue
+		}
+		var frameRef *string
+		if dev.FrameID != nil {
+			if v, ok := frameElID[*dev.FrameID]; ok {
+				frameRef = &v
+			}
+		}
+		color := cableTypeColor[p.TypeID]
+		if color == "" {
+			color = "#1e1e1e"
+		}
+		els = append(els, Element{
+			ID:              elID,
+			Type:            "ellipse",
+			X:               dev.X + p.XOffset - 6,
+			Y:               dev.Y + p.YOffset - 4,
+			Width:           12,
+			Height:          9,
+			StrokeColor:     color,
+			BackgroundColor: "transparent",
+			FillStyle:       "solid",
+			StrokeWidth:     2,
+			StrokeStyle:     "solid",
+			Roughness:       0,
+			Opacity:         100,
+			GroupIDs:        []string{},
+			FrameID:         frameRef,
+			Roundness:       &Roundness{Type: 2},
+			Seed:            randInt(),
+			Version:         1,
+			VersionNonce:    randInt(),
+			Updated:         nowMilli,
+		})
+	}
+
+	// IO markers — diamonds with bound "IO" (or m's label) text.
+	powerColor := ""
+	for _, t := range snap.CableTypes {
+		if t.Name == "Power" {
+			powerColor = t.Color
+			break
+		}
+	}
+	if powerColor == "" {
+		powerColor = "#e03131"
+	}
+	for _, m := range snap.IOMarkers {
+		elID := idFor(m.ExcalidrawID)
+		a.IOMarkers[m.ID] = elID
+		ioElID[m.ID] = elID
+		textID := genID()
+		var frameRef *string
+		if m.FrameID != nil {
+			if v, ok := frameElID[*m.FrameID]; ok {
+				frameRef = &v
+			}
+		}
+		els = append(els, Element{
+			ID:              elID,
+			Type:            "diamond",
+			X:               m.X,
+			Y:               m.Y,
+			Width:           30,
+			Height:          30,
+			StrokeColor:     powerColor,
+			BackgroundColor: "transparent",
+			FillStyle:       "solid",
+			StrokeWidth:     2,
+			StrokeStyle:     "solid",
+			Roughness:       0,
+			Opacity:         100,
+			GroupIDs:        []string{},
+			FrameID:         frameRef,
+			Roundness:       &Roundness{Type: 2},
+			Seed:            randInt(),
+			Version:         1,
+			VersionNonce:    randInt(),
+			Updated:         nowMilli,
+			BoundElements:   []BoundRef{{ID: textID, Type: "text"}},
+		})
+		els = append(els, Element{
+			ID:              textID,
+			Type:            "text",
+			X:               m.X,
+			Y:               m.Y + 7,
+			Width:           30,
+			Height:          16,
+			StrokeColor:     powerColor,
+			BackgroundColor: "transparent",
+			FillStyle:       "solid",
+			StrokeWidth:     2,
+			StrokeStyle:     "solid",
+			Roughness:       0,
+			Opacity:         100,
+			GroupIDs:        []string{},
+			FrameID:         frameRef,
+			Seed:            randInt(),
+			Version:         1,
+			VersionNonce:    randInt(),
+			Updated:         nowMilli,
+			Text:            m.Label,
+			OriginalText:    m.Label,
+			FontSize:        11,
+			FontFamily:      1,
+			TextAlign:       "center",
+			VerticalAlign:   "middle",
+			ContainerID:     &elID,
+			LineHeight:      1.25,
+		})
+	}
+
+	// Clamps — small grey rounded squares (v5 §11.7). Distinct from the
+	// red IO marker diamonds so m can tell routing anchors from wall
+	// outlets at a glance.
+	const clampSize = 12.0
+	for _, cl := range snap.Clamps {
+		elID := idFor(cl.ExcalidrawID)
+		a.Clamps[cl.ID] = elID
+		var frameRef *string
+		if cl.FrameID != nil {
+			if v, ok := frameElID[*cl.FrameID]; ok {
+				frameRef = &v
+			}
+		}
+		els = append(els, Element{
+			ID:              elID,
+			Type:            "rectangle",
+			X:               cl.X - clampSize/2,
+			Y:               cl.Y - clampSize/2,
+			Width:           clampSize,
+			Height:          clampSize,
+			StrokeColor:     "#555555",
+			BackgroundColor: "#888888",
+			FillStyle:       "solid",
+			StrokeWidth:     1,
+			StrokeStyle:     "solid",
+			Roughness:       0,
+			Opacity:         100,
+			GroupIDs:        []string{},
+			FrameID:         frameRef,
+			Roundness:       &Roundness{Type: 3},
+			Seed:            randInt(),
+			Version:         1,
+			VersionNonce:    randInt(),
+			Updated:         nowMilli,
+		})
+	}
+
+	// Pre-group cable_clamps by cable for the arrow mid-points pass.
+	clampsByCable := map[int64][]db.CableClamp{}
+	for _, cc := range snap.CableClamps {
+		clampsByCable[cc.CableID] = append(clampsByCable[cc.CableID], cc)
+	}
+	for _, arr := range clampsByCable {
+		// Already sorted by ListCableClamps (ORDER BY cable_id, ord),
+		// but defend against unsorted inputs.
+		sort.Slice(arr, func(i, j int) bool { return arr[i].Ord < arr[j].Ord })
+	}
+	clampPos := map[int64][2]float64{}
+	for _, cl := range snap.Clamps {
+		clampPos[cl.ID] = [2]float64{cl.X, cl.Y}
+	}
+
+	// Cables — arrows with startBinding/endBinding to the port / device /
+	// IO marker excalidraw_ids. Endpoint anchors (the visible "from" /
+	// "to" points) come from the same anchor logic the canvas uses.
+	for _, c := range snap.Cables {
+		elID := idFor(c.ExcalidrawID)
+		a.Cables[c.ID] = elID
+		fromAnchor, fromRef := exportAnchor(c.FromPortID, c.FromDeviceID, c.FromIOID,
+			snap, deviceElID, portElID, ioElID)
+		toAnchor, toRef := exportAnchor(c.ToPortID, c.ToDeviceID, c.ToIOID,
+			snap, deviceElID, portElID, ioElID)
+		// fromRef/toRef are nil when the endpoint row vanished (manual
+		// cable referencing a deleted port, say). Skip rather than emit
+		// a half-bound arrow.
+		if fromRef == nil || toRef == nil {
+			continue
+		}
+		color := cableTypeColor[c.TypeID]
+		if color == "" {
+			color = "#1e1e1e"
+		}
+		startArr := ""
+		endArr := "arrow"
+		// Excalidraw arrow `points` is relative to (X, Y). We anchor at
+		// the from-point, so vertex 0 is always (0, 0). Mid-vertices
+		// (clamps) and the final to-vertex are offsets from there.
+		pts := [][2]float64{{0, 0}}
+		for _, cc := range clampsByCable[c.ID] {
+			pos, ok := clampPos[cc.ClampID]
+			if !ok {
+				continue
+			}
+			pts = append(pts, [2]float64{pos[0] - fromAnchor[0], pos[1] - fromAnchor[1]})
+		}
+		pts = append(pts, [2]float64{toAnchor[0] - fromAnchor[0], toAnchor[1] - fromAnchor[1]})
+		els = append(els, Element{
+			ID:              elID,
+			Type:            "arrow",
+			X:               fromAnchor[0],
+			Y:               fromAnchor[1],
+			Width:           toAnchor[0] - fromAnchor[0],
+			Height:          toAnchor[1] - fromAnchor[1],
+			StrokeColor:     color,
+			BackgroundColor: "transparent",
+			FillStyle:       "solid",
+			StrokeWidth:     2,
+			StrokeStyle:     "solid",
+			Roughness:       0,
+			Opacity:         100,
+			GroupIDs:        []string{},
+			Seed:            randInt(),
+			Version:         1,
+			VersionNonce:    randInt(),
+			Updated:         nowMilli,
+			Points:          pts,
+			StartArrowhead:  &startArr,
+			EndArrowhead:    &endArr,
+			StartBinding:    bindingPtr(fromRef),
+			EndBinding:      bindingPtr(toRef),
+		})
+	}
+
+	// Legend in the top-left of the first frame (or at 20,20 if there
+	// are no frames). One text row per cable_type, stacked vertically.
+	legendX, legendY := 20.0, 20.0
+	if len(snap.Frames) > 0 {
+		legendX = snap.Frames[0].X + 10
+		legendY = snap.Frames[0].Y + 10
+	}
+	for i, t := range snap.CableTypes {
+		els = append(els, Element{
+			ID:              genID(),
+			Type:            "text",
+			X:               legendX,
+			Y:               legendY + float64(i*18),
+			Width:           80,
+			Height:          16,
+			StrokeColor:     t.Color,
+			BackgroundColor: "transparent",
+			FillStyle:       "solid",
+			StrokeWidth:     1,
+			StrokeStyle:     "solid",
+			Roughness:       0,
+			Opacity:         100,
+			GroupIDs:        []string{},
+			Seed:            randInt(),
+			Version:         1,
+			VersionNonce:    randInt(),
+			Updated:         nowMilli,
+			Text:            t.Name,
+			OriginalText:    t.Name,
+			FontSize:        16,
+			FontFamily:      1,
+			TextAlign:       "left",
+			VerticalAlign:   "top",
+			LineHeight:      1.25,
+		})
+	}
+
+	scene := &Scene{
+		Type:     "excalidraw",
+		Version:  2,
+		Source:   "cablegui",
+		Elements: els,
+		AppState: AppState{
+			GridSize:       nil,
+			ViewBackground: "#ffffff",
+		},
+		Files: Files{},
+	}
+	return scene, a
+}
+
+func bindingPtr(b *Binding) *Binding {
+	if b == nil {
+		return nil
+	}
+	return b
+}
+
+// exportAnchor returns (x,y) + a Binding for the endpoint kind passed in.
+func exportAnchor(portID, deviceID, ioID *int64, snap *db.Snapshot,
+	devElID, portElID, ioElID map[int64]string,
+) ([2]float64, *Binding) {
+	if portID != nil {
+		// Find the port + its parent device.
+		for _, p := range snap.Ports {
+			if p.ID != *portID {
+				continue
+			}
+			for _, d := range snap.Devices {
+				if d.ID == p.DeviceID {
+					id := portElID[p.ID]
+					return [2]float64{d.X + p.XOffset, d.Y + p.YOffset}, &Binding{ElementID: id, Focus: 0, Gap: 1}
+				}
+			}
+		}
+	}
+	if deviceID != nil {
+		for _, d := range snap.Devices {
+			if d.ID != *deviceID {
+				continue
+			}
+			id := devElID[d.ID]
+			return [2]float64{d.X + d.Width/2, d.Y + d.Height/2}, &Binding{ElementID: id, Focus: 0, Gap: 1}
+		}
+	}
+	if ioID != nil {
+		for _, m := range snap.IOMarkers {
+			if m.ID != *ioID {
+				continue
+			}
+			id := ioElID[m.ID]
+			return [2]float64{m.X + 15, m.Y + 15}, &Binding{ElementID: id, Focus: 0, Gap: 1}
+		}
+	}
+	return [2]float64{}, nil
+}
+
+// Generate21 mints a 21-char base62 identifier, the shape Excalidraw
+// uses for element ids (nanoid-style). crypto/rand source.
+func Generate21() string {
+	const alphabet = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz"
+	buf := make([]byte, 21)
+	max := big.NewInt(int64(len(alphabet)))
+	for i := range buf {
+		n, err := rand.Int(rand.Reader, max)
+		if err != nil {
+			// crypto/rand failure is unrecoverable in practice; fall back
+			// to a deterministic alphabet position so callers see a panic-
+			// adjacent symptom rather than a half-initialised id.
+			return fmt.Sprintf("crypto-rand-failed-%d", i)
+		}
+		buf[i] = alphabet[n.Int64()]
+	}
+	return string(buf)
+}
+
+// randInt returns a non-negative int64 derived from crypto/rand for
+// Excalidraw's `seed` / `versionNonce`. Excalidraw treats these as
+// noise — only the IDs and the structural fields matter.
+func randInt() int64 {
+	n, err := rand.Int(rand.Reader, big.NewInt(1<<62))
+	if err != nil {
+		return 0
+	}
+	return n.Int64()
+}
+
+// MarshalScene returns the scene as Excalidraw-flavoured JSON.
+func MarshalScene(s *Scene) ([]byte, error) {
+	return json.Marshal(s)
+}

internal/exporter/exporter_test.go

@@ -0,0 +1,225 @@
+package exporter
+
+import (
+	"encoding/json"
+	"strings"
+	"testing"
+
+	"mgit.msbls.de/m/cablegui/internal/db"
+)
+
+// deterministic id generator for tests
+func newSeq() func() string {
+	i := 0
+	return func() string {
+		i++
+		return "id" + strings.Repeat("0", 19-len(itoa(i))) + itoa(i)
+	}
+}
+
+func itoa(i int) string {
+	if i == 0 {
+		return "0"
+	}
+	buf := [20]byte{}
+	pos := len(buf)
+	for i > 0 {
+		pos--
+		buf[pos] = byte('0' + i%10)
+		i /= 10
+	}
+	return string(buf[pos:])
+}
+
+func sampleSnapshot() *db.Snapshot {
+	pid := int64(1)
+	devID := int64(10)
+	devID2 := int64(11)
+	portID := int64(100)
+	portID2 := int64(101)
+	ioID := int64(200)
+
+	return &db.Snapshot{
+		Project: db.Project{ID: pid, Name: "LOFT", DrawingName: "LOFT.excalidraw"},
+		Frames: []db.Frame{
+			{ID: 1, ProjectID: pid, Name: "desk", X: 100, Y: 100, Width: 800, Height: 500},
+		},
+		Devices: []db.Device{
+			{ID: devID, ProjectID: pid, Name: "NAS", Color: "#1e1e1e", X: 200, Y: 200, Width: 100, Height: 35, FrameID: ptr(int64(1))},
+			{ID: devID2, ProjectID: pid, Name: "Switch", Color: "#1e1e1e", X: 400, Y: 200, Width: 100, Height: 35},
+		},
+		Ports: []db.Port{
+			{ID: portID, ProjectID: pid, DeviceID: devID, TypeID: 5, XOffset: 50, YOffset: 35},
+			{ID: portID2, ProjectID: pid, DeviceID: devID2, TypeID: 5, XOffset: 50, YOffset: 35},
+		},
+		IOMarkers: []db.IOMarker{
+			{ID: ioID, ProjectID: pid, Label: "Wall A", X: 50, Y: 50},
+		},
+		Cables: []db.Cable{
+			{ID: 1000, ProjectID: pid, TypeID: 5,
+				FromPortID: &portID, ToPortID: &portID2, Auto: false},
+		},
+		CableTypes: []db.CableType{
+			{ID: 1, Name: "Power", Color: "#e03131"},
+			{ID: 2, Name: "USB", Color: "#2f9e44"},
+			{ID: 3, Name: "HDMI", Color: "#1971c2"},
+			{ID: 4, Name: "DP", Color: "#9c36b5"},
+			{ID: 5, Name: "RJ45", Color: "#ffd500"},
+		},
+	}
+}
+
+func ptr[T any](v T) *T { return &v }
+
+func TestBuildScene_BasicShape(t *testing.T) {
+	snap := sampleSnapshot()
+	scene, ids := BuildScene(snap, 1700000000000, newSeq())
+
+	if scene.Type != "excalidraw" || scene.Version != 2 {
+		t.Errorf("bad header: %+v", scene)
+	}
+	// frame(1) + device-rect+text(2 each) + ports(2) + io+text(2) +
+	// cable(1) + legend(5) = 1 + 4 + 2 + 2 + 1 + 5 = 15.
+	if len(scene.Elements) < 15 {
+		t.Errorf("element count = %d, want ≥15", len(scene.Elements))
+	}
+	if len(ids.Frames) != 1 || len(ids.Devices) != 2 || len(ids.Ports) != 2 ||
+		len(ids.IOMarkers) != 1 || len(ids.Cables) != 1 {
+		t.Errorf("id assignment shape wrong: %+v", ids)
+	}
+}
+
+func TestBuildScene_ReusesExistingExcalidrawIDs(t *testing.T) {
+	snap := sampleSnapshot()
+	// Pre-assign an excalidraw_id on the first device.
+	preset := "preset0000000000000NAS"[:21]
+	snap.Devices[0].ExcalidrawID = &preset
+	_, ids := BuildScene(snap, 1700000000000, newSeq())
+	if ids.Devices[snap.Devices[0].ID] != preset {
+		t.Errorf("preset id not reused: got %q, want %q", ids.Devices[snap.Devices[0].ID], preset)
+	}
+}
+
+func TestBuildScene_ArrowsBindToPorts(t *testing.T) {
+	snap := sampleSnapshot()
+	scene, ids := BuildScene(snap, 1700000000000, newSeq())
+	// The arrow's startBinding should reference the from-port's element id.
+	fromPortElID := ids.Ports[100]
+	toPortElID := ids.Ports[101]
+	var found *Element
+	for i := range scene.Elements {
+		if scene.Elements[i].Type == "arrow" {
+			found = &scene.Elements[i]
+			break
+		}
+	}
+	if found == nil {
+		t.Fatal("no arrow in scene")
+	}
+	if found.StartBinding == nil || found.StartBinding.ElementID != fromPortElID {
+		t.Errorf("start binding wrong: %+v", found.StartBinding)
+	}
+	if found.EndBinding == nil || found.EndBinding.ElementID != toPortElID {
+		t.Errorf("end binding wrong: %+v", found.EndBinding)
+	}
+}
+
+func TestBuildScene_BundlesIgnored(t *testing.T) {
+	snap := sampleSnapshot()
+	// Snapshot.Bundles is unused in the exporter for v0 per design §4.1.
+	// Add some and confirm no bundle elements appear in the scene.
+	snap.Bundles = []db.Bundle{{ID: 1, Name: "trunk", CableIDs: []int64{1000}}}
+	scene, _ := BuildScene(snap, 1700000000000, newSeq())
+	for _, e := range scene.Elements {
+		if strings.Contains(e.Type, "bundle") {
+			t.Errorf("bundle element leaked into scene: %+v", e)
+		}
+	}
+}
+
+func TestBuildScene_ClampsRenderAsRectangles(t *testing.T) {
+	snap := sampleSnapshot()
+	snap.Clamps = []db.Clamp{
+		{ID: 1, ProjectID: 1, X: 500, Y: 300},
+		{ID: 2, ProjectID: 1, X: 550, Y: 320},
+	}
+	scene, ids := BuildScene(snap, 1700000000000, newSeq())
+	if len(ids.Clamps) != 2 {
+		t.Errorf("clamp ids = %d, want 2", len(ids.Clamps))
+	}
+	clampElIDs := map[string]bool{}
+	for _, id := range ids.Clamps {
+		clampElIDs[id] = true
+	}
+	got := 0
+	for _, e := range scene.Elements {
+		if clampElIDs[e.ID] && e.Type == "rectangle" {
+			got++
+		}
+	}
+	if got != 2 {
+		t.Errorf("clamp rectangle elements = %d, want 2", got)
+	}
+}
+
+func TestBuildScene_ArrowPointsIncludeClamps(t *testing.T) {
+	snap := sampleSnapshot()
+	snap.Clamps = []db.Clamp{
+		{ID: 10, ProjectID: 1, X: 350, Y: 250},
+	}
+	snap.CableClamps = []db.CableClamp{
+		{CableID: 1000, ClampID: 10, Ord: 1},
+	}
+	scene, _ := BuildScene(snap, 1700000000000, newSeq())
+	var arrow *Element
+	for i := range scene.Elements {
+		if scene.Elements[i].Type == "arrow" {
+			arrow = &scene.Elements[i]
+			break
+		}
+	}
+	if arrow == nil {
+		t.Fatal("no arrow in scene")
+	}
+	if len(arrow.Points) != 3 {
+		t.Errorf("arrow points = %d, want 3 (from + clamp + to): %+v", len(arrow.Points), arrow.Points)
+	}
+	// First point is always (0, 0) by convention; middle point should
+	// equal the clamp's position relative to the arrow's anchor.
+	if arrow.Points[0][0] != 0 || arrow.Points[0][1] != 0 {
+		t.Errorf("first point = %v, want [0,0]", arrow.Points[0])
+	}
+	// Middle vertex = clamp.x - fromAnchor.x, clamp.y - fromAnchor.y.
+	// fromAnchor for port 100 = (200 + 50, 200 + 35) = (250, 235).
+	wantX, wantY := 350.0-250.0, 250.0-235.0
+	if arrow.Points[1][0] != wantX || arrow.Points[1][1] != wantY {
+		t.Errorf("mid point = %v, want [%v, %v]", arrow.Points[1], wantX, wantY)
+	}
+}
+
+func TestMarshalScene_IsJSON(t *testing.T) {
+	snap := sampleSnapshot()
+	scene, _ := BuildScene(snap, 1700000000000, newSeq())
+	b, err := MarshalScene(scene)
+	if err != nil {
+		t.Fatalf("marshal: %v", err)
+	}
+	var roundtrip map[string]any
+	if err := json.Unmarshal(b, &roundtrip); err != nil {
+		t.Fatalf("roundtrip: %v", err)
+	}
+	if roundtrip["type"] != "excalidraw" {
+		t.Errorf("type field = %v, want excalidraw", roundtrip["type"])
+	}
+}
+
+func TestGenerate21(t *testing.T) {
+	a := Generate21()
+	b := Generate21()
+	if len(a) != 21 || len(b) != 21 {
+		t.Errorf("len wrong: %d / %d", len(a), len(b))
+	}
+	if a == b {
+		t.Errorf("ids collide: %q == %q", a, b)
+	}
+}

internal/server/cables.go

@@ -0,0 +1,225 @@
+package server
+
+import (
+	"encoding/json"
+	"errors"
+	"net/http"
+
+	"mgit.msbls.de/m/cablegui/internal/db"
+)
+
+type cableEndpointBody struct {
+	PortID   *int64 `json:"port_id,omitempty"`
+	DeviceID *int64 `json:"device_id,omitempty"`
+	IOID     *int64 `json:"io_id,omitempty"`
+}
+
+type cableCreate struct {
+	TypeID int64             `json:"type_id"`
+	Label  string            `json:"label,omitempty"`
+	From   cableEndpointBody `json:"from"`
+	To     cableEndpointBody `json:"to"`
+	Auto   bool              `json:"auto,omitempty"`
+}
+
+type cablePatch struct {
+	TypeID *int64             `json:"type_id,omitempty"`
+	Label  *string            `json:"label,omitempty"`
+	From   *cableEndpointBody `json:"from,omitempty"`
+	To     *cableEndpointBody `json:"to,omitempty"`
+	Auto   *bool              `json:"auto,omitempty"`
+	// Promote=true asks the server to set auto=false when an auto cable
+	// is being PATCHed (slice 6 §5b.3 — explicit promote-to-manual).
+	Promote bool `json:"promote,omitempty"`
+}
+
+func toCableEndpoint(b cableEndpointBody) db.CableEndpoint {
+	return db.CableEndpoint{PortID: b.PortID, DeviceID: b.DeviceID, IOID: b.IOID}
+}
+
+func (h *handlers) listCables(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	cs, err := h.store.ListCables(pid)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, cs)
+}
+
+func (h *handlers) createCable(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	var body cableCreate
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	c, err := h.store.CreateCable(pid, db.CableCreate{
+		TypeID: body.TypeID, Label: body.Label,
+		From: toCableEndpoint(body.From), To: toCableEndpoint(body.To),
+		Auto: body.Auto,
+	})
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusCreated, c)
+}
+
+func (h *handlers) patchCable(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	var body cablePatch
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	u := db.CableUpdate{
+		TypeID: body.TypeID, Label: body.Label, Auto: body.Auto,
+	}
+	if body.From != nil {
+		ep := toCableEndpoint(*body.From)
+		u.From = &ep
+	}
+	if body.To != nil {
+		ep := toCableEndpoint(*body.To)
+		u.To = &ep
+	}
+	// Promote semantics: explicit promote=true OR (PATCH touched
+	// type/from/to AND the current cable is auto) → set auto=false.
+	if body.Promote {
+		f := false
+		u.Auto = &f
+	}
+	c, err := h.store.UpdateCable(pid, id, u)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, c)
+}
+
+func (h *handlers) deleteCable(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	if err := h.store.DeleteCable(pid, id); err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	w.WriteHeader(http.StatusNoContent)
+}
+
+// ----------------------------------------------------------------- bundles
+
+type bundleCreate struct {
+	Name     string  `json:"name"`
+	CableIDs []int64 `json:"cable_ids"`
+}
+
+type bundlePatch struct {
+	Name     *string  `json:"name,omitempty"`
+	CableIDs *[]int64 `json:"cable_ids,omitempty"`
+}
+
+func (h *handlers) listBundles(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	bs, err := h.store.ListBundles(pid)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, bs)
+}
+
+func (h *handlers) createBundle(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	var body bundleCreate
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	b, err := h.store.CreateBundle(pid, db.BundleCreate{
+		Name: body.Name, CableIDs: body.CableIDs, Auto: false,
+	})
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusCreated, b)
+}
+
+func (h *handlers) patchBundle(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	var body bundlePatch
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	b, err := h.store.UpdateBundle(pid, id, db.BundleUpdate{
+		Name: body.Name, CableIDs: body.CableIDs,
+	})
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, b)
+}
+
+func (h *handlers) deleteBundle(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	if err := h.store.DeleteBundle(pid, id); err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	w.WriteHeader(http.StatusNoContent)
+}

internal/server/clamps.go

@@ -0,0 +1,195 @@
+package server
+
+import (
+	"encoding/json"
+	"errors"
+	"net/http"
+
+	"mgit.msbls.de/m/cablegui/internal/db"
+)
+
+type clampCreate struct {
+	X       float64         `json:"x"`
+	Y       float64         `json:"y"`
+	Label   string          `json:"label,omitempty"`
+	FrameID json.RawMessage `json:"frame_id,omitempty"`
+}
+
+type clampPatch struct {
+	X       *float64        `json:"x,omitempty"`
+	Y       *float64        `json:"y,omitempty"`
+	Label   *string         `json:"label,omitempty"`
+	FrameID json.RawMessage `json:"frame_id,omitempty"`
+}
+
+type cableClampAttach struct {
+	ClampID int64 `json:"clamp_id"`
+	Ord     int   `json:"ord,omitempty"`
+}
+
+type cableClampReorder struct {
+	ClampIDs []int64 `json:"clamp_ids"`
+}
+
+func (h *handlers) listClamps(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	cs, err := h.store.ListClamps(pid)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, cs)
+}
+
+func (h *handlers) createClamp(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	var body clampCreate
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	ref, err := parseFrameRef(body.FrameID)
+	if err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	c, err := h.store.CreateClamp(pid, db.ClampCreate{
+		X: body.X, Y: body.Y, Label: body.Label, FrameID: ref.ID,
+	})
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusCreated, c)
+}
+
+func (h *handlers) patchClamp(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	var body clampPatch
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	ref, err := parseFrameRef(body.FrameID)
+	if err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	c, err := h.store.UpdateClamp(pid, id, db.ClampUpdate{
+		X: body.X, Y: body.Y, Label: body.Label, FrameID: ref,
+	})
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, c)
+}
+
+func (h *handlers) deleteClamp(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	if err := h.store.DeleteClamp(pid, id); err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	w.WriteHeader(http.StatusNoContent)
+}
+
+// POST /api/projects/:pid/cables/:cid/clamps — attach a clamp to a cable.
+func (h *handlers) attachClampToCable(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	cid, ok := parseInt64Path(r, "cid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "cid must be a positive integer")
+		return
+	}
+	var body cableClampAttach
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	cc, err := h.store.AttachClampToCable(pid, cid, body.ClampID, body.Ord)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusCreated, cc)
+}
+
+// DELETE /api/projects/:pid/cables/:cid/clamps/:cmid — detach a clamp.
+func (h *handlers) detachClampFromCable(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	cid, ok := parseInt64Path(r, "cid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "cid must be a positive integer")
+		return
+	}
+	cmid, ok := parseInt64Path(r, "cmid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "cmid must be a positive integer")
+		return
+	}
+	if err := h.store.DetachClampFromCable(pid, cid, cmid); err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	w.WriteHeader(http.StatusNoContent)
+}
+
+// PUT /api/projects/:pid/cables/:cid/clamps — replace clamp sequence.
+func (h *handlers) reorderCableClamps(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	cid, ok := parseInt64Path(r, "cid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "cid must be a positive integer")
+		return
+	}
+	var body cableClampReorder
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	out, err := h.store.ReorderCableClamps(pid, cid, body.ClampIDs)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, out)
+}

internal/server/connection_requirements.go

@@ -0,0 +1,115 @@
+package server
+
+import (
+	"encoding/json"
+	"errors"
+	"net/http"
+
+	"mgit.msbls.de/m/cablegui/internal/db"
+)
+
+type connReqCreate struct {
+	FromDeviceID         int64  `json:"from_device_id"`
+	ToDeviceID           int64  `json:"to_device_id"`
+	PreferredCableTypeID *int64 `json:"preferred_cable_type_id,omitempty"`
+	MustConnect          *bool  `json:"must_connect,omitempty"`
+	Notes                string `json:"notes,omitempty"`
+}
+
+// connReqPatch uses RawMessage for preferred_cable_type_id so the wire
+// tri-state ({} / null / int) is preserved.
+type connReqPatch struct {
+	PreferredCableTypeID json.RawMessage `json:"preferred_cable_type_id,omitempty"`
+	MustConnect          *bool           `json:"must_connect,omitempty"`
+	Notes                *string         `json:"notes,omitempty"`
+}
+
+func (h *handlers) listConnectionRequirements(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	rs, err := h.store.ListConnectionRequirements(pid)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, rs)
+}
+
+func (h *handlers) createConnectionRequirement(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	var body connReqCreate
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	cr, err := h.store.CreateConnectionRequirement(pid, db.ConnectionRequirementCreate{
+		FromDeviceID:         body.FromDeviceID,
+		ToDeviceID:           body.ToDeviceID,
+		PreferredCableTypeID: body.PreferredCableTypeID,
+		MustConnect:          body.MustConnect,
+		Notes:                body.Notes,
+	})
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusCreated, cr)
+}
+
+func (h *handlers) patchConnectionRequirement(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	var body connReqPatch
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	ctRef, err := parseFrameRef(body.PreferredCableTypeID)
+	if err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), "preferred_cable_type_id must be an integer or null")
+		return
+	}
+	cr, err := h.store.UpdateConnectionRequirement(pid, id, db.ConnectionRequirementUpdate{
+		PreferredCableTypeID: ctRef,
+		MustConnect:          body.MustConnect,
+		Notes:                body.Notes,
+	})
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, cr)
+}
+
+func (h *handlers) deleteConnectionRequirement(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	if err := h.store.DeleteConnectionRequirement(pid, id); err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	w.WriteHeader(http.StatusNoContent)
+}

internal/server/device_types.go

@@ -0,0 +1,147 @@
+package server
+
+import (
+	"encoding/json"
+	"errors"
+	"net/http"
+
+	"mgit.msbls.de/m/cablegui/internal/db"
+)
+
+type deviceTypePortBody struct {
+	CableTypeID int64  `json:"cable_type_id"`
+	LabelPrefix string `json:"label_prefix,omitempty"`
+	Count       int    `json:"count"`
+	Edge        string `json:"edge,omitempty"`
+	SortOrder   int    `json:"sort_order,omitempty"`
+}
+
+type deviceTypeCreate struct {
+	Name        string               `json:"name"`
+	Kind        string               `json:"kind,omitempty"`
+	Icon        string               `json:"icon,omitempty"`
+	Description string               `json:"description,omitempty"`
+	Ports       []deviceTypePortBody `json:"ports,omitempty"`
+}
+
+type deviceTypePatch struct {
+	Name        *string               `json:"name,omitempty"`
+	Kind        *string               `json:"kind,omitempty"`
+	Icon        *string               `json:"icon,omitempty"`
+	Description *string               `json:"description,omitempty"`
+	Ports       *[]deviceTypePortBody `json:"ports,omitempty"`
+}
+
+func portsToStore(body []deviceTypePortBody) []db.DeviceTypePortCreate {
+	out := make([]db.DeviceTypePortCreate, len(body))
+	for i, p := range body {
+		c := p.Count
+		if c <= 0 {
+			c = 1
+		}
+		out[i] = db.DeviceTypePortCreate{
+			CableTypeID: p.CableTypeID,
+			LabelPrefix: p.LabelPrefix,
+			Count:       c,
+			Edge:        p.Edge,
+			SortOrder:   p.SortOrder,
+		}
+	}
+	return out
+}
+
+// GET /api/device-types — built-in catalog only, read-only.
+func (h *handlers) listBuiltInDeviceTypes(w http.ResponseWriter, _ *http.Request) {
+	dts, err := h.store.ListBuiltInDeviceTypes()
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, dts)
+}
+
+// GET /api/projects/:pid/device-types — built-ins + project-custom merged.
+func (h *handlers) listDeviceTypes(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	dts, err := h.store.ListDeviceTypesForProject(pid)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, dts)
+}
+
+func (h *handlers) createDeviceType(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	var body deviceTypeCreate
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	dt, err := h.store.CreateDeviceType(pid, db.DeviceTypeCreate{
+		Name: body.Name, Kind: body.Kind, Icon: body.Icon,
+		Description: body.Description, Ports: portsToStore(body.Ports),
+	})
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusCreated, dt)
+}
+
+func (h *handlers) patchDeviceType(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	var body deviceTypePatch
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	u := db.DeviceTypeUpdate{
+		Name: body.Name, Kind: body.Kind, Icon: body.Icon, Description: body.Description,
+	}
+	if body.Ports != nil {
+		converted := portsToStore(*body.Ports)
+		u.Ports = &converted
+	}
+	dt, err := h.store.UpdateDeviceType(pid, id, u)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, dt)
+}
+
+func (h *handlers) deleteDeviceType(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	if err := h.store.DeleteDeviceType(pid, id); err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	w.WriteHeader(http.StatusNoContent)
+}

internal/server/export.go

@@ -0,0 +1,122 @@
+package server
+
+import (
+	"bytes"
+	"context"
+	"encoding/json"
+	"errors"
+	"fmt"
+	"io"
+	"net/http"
+	"os"
+	"strings"
+	"time"
+
+	"mgit.msbls.de/m/cablegui/internal/db"
+	"mgit.msbls.de/m/cablegui/internal/exporter"
+)
+
+// syncExport runs the project's snapshot through the exporter, persists
+// the assigned excalidraw_ids, then PUTs the scene to mxdrw.msbls.de.
+func (h *handlers) syncExport(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+
+	base := os.Getenv("MEXDRAW_BASE_URL")
+	if base == "" {
+		base = "https://mxdrw.msbls.de"
+	}
+	user := os.Getenv("MEXDRAW_USER")
+	pass := os.Getenv("MEXDRAW_PASS")
+	if user == "" || pass == "" {
+		writeJSON(w, http.StatusBadRequest, errorBody{
+			Error:   "MEXDRAW_USER / MEXDRAW_PASS not set",
+			Details: "Add MEXDRAW_USER and MEXDRAW_PASS to /home/m/secrets/cablegui/.env on mDock and restart the container — mxdrw expects HTTP Basic Auth",
+		})
+		return
+	}
+
+	snap, err := h.store.Snapshot(pid)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+
+	now := time.Now().UnixMilli()
+	scene, ids := exporter.BuildScene(snap, now, exporter.Generate21)
+
+	// Persist the freshly-assigned ids so the next export reuses them.
+	// We pass in the full maps; PersistExcalidrawIDs is idempotent (it
+	// only updates rows whose excalidraw_id is still NULL).
+	if err := h.store.PersistExcalidrawIDs(pid, ids.Frames, ids.Devices, ids.Ports, ids.IOMarkers, ids.Cables, ids.Clamps); err != nil {
+		writeError(w, fmt.Errorf("persist excalidraw_ids: %w", err), nil)
+		return
+	}
+
+	payload, err := exporter.MarshalScene(scene)
+	if err != nil {
+		writeError(w, fmt.Errorf("marshal scene: %w", err), nil)
+		return
+	}
+
+	drawingName := snap.Project.DrawingName
+	if !strings.HasSuffix(drawingName, ".excalidraw") {
+		drawingName += ".excalidraw"
+	}
+	url := strings.TrimSuffix(base, "/") + "/api/drawings/" + drawingName
+
+	// Sane network timeout; mxdrw is on the LAN so this should be quick.
+	ctx, cancel := context.WithTimeout(r.Context(), 10*time.Second)
+	defer cancel()
+
+	req, err := http.NewRequestWithContext(ctx, http.MethodPut, url, bytes.NewReader(payload))
+	if err != nil {
+		writeError(w, fmt.Errorf("build PUT: %w", err), nil)
+		return
+	}
+	req.Header.Set("Content-Type", "application/json")
+	req.SetBasicAuth(user, pass)
+
+	resp, err := http.DefaultClient.Do(req)
+	if err != nil {
+		writeJSON(w, http.StatusBadGateway, errorBody{
+			Error:   "mxdrw unreachable",
+			Details: err.Error(),
+		})
+		return
+	}
+	defer resp.Body.Close()
+	body, _ := io.ReadAll(resp.Body)
+	if resp.StatusCode >= 400 {
+		writeJSON(w, http.StatusBadGateway, errorBody{
+			Error: fmt.Sprintf("mxdrw rejected upload (%d)", resp.StatusCode),
+			Details: map[string]any{
+				"status": resp.StatusCode,
+				"body":   string(body),
+				"url":    url,
+			},
+		})
+		return
+	}
+
+	// Best-effort parse — mxdrw returns whatever it returns; we surface
+	// the public viewer URL no matter what.
+	var serverEcho any
+	_ = json.Unmarshal(body, &serverEcho)
+
+	viewerURL := strings.TrimSuffix(base, "/") + "/draw/" + strings.TrimSuffix(drawingName, ".excalidraw") + ".excalidraw"
+	writeJSON(w, http.StatusOK, map[string]any{
+		"ok":           true,
+		"drawing_name": drawingName,
+		"url":          viewerURL,
+		"element_count": len(scene.Elements),
+		"mxdrw_response": serverEcho,
+	})
+}
+
+// noLeak prevents unused-import errors if errors-pkg ever becomes unused
+// after a refactor — keeps the import light.
+var _ = errors.New

internal/server/frames_devices.go

@@ -5,7 +5,7 @@ import (
 	"errors"
 	"net/http"
 
-	"mgit.msbls.de/m/mcables/internal/db"
+	"mgit.msbls.de/m/cablegui/internal/db"
 )
 
 // ---------------------------------------------------------------- frames
@@ -110,6 +110,7 @@ func (h *handlers) deleteFrame(w http.ResponseWriter, r *http.Request) {
 type deviceCreate struct {
 	Name    string  `json:"name"`
 	FrameID *int64  `json:"frame_id,omitempty"`
+	TypeID  *int64  `json:"type_id,omitempty"`
 	Color   string  `json:"color,omitempty"`
 	X       float64 `json:"x"`
 	Y       float64 `json:"y"`
@@ -117,13 +118,14 @@ type deviceCreate struct {
 	Height  float64 `json:"height"`
 }
 
-// devicePatch uses a raw `json.RawMessage` for frame_id so we can tell
-// "key absent" (leave alone) from "key present and null" (set to NULL)
-// from "key present with an int" (move to that frame). Standard encoding
-// of nullable fields in JSON PATCH.
+// devicePatch uses a raw `json.RawMessage` for frame_id + type_id so we
+// can tell "key absent" (leave alone) from "key present and null"
+// (set to NULL) from "key present with an int" (move to that target).
+// Standard encoding of nullable fields in JSON PATCH.
 type devicePatch struct {
 	Name    *string         `json:"name,omitempty"`
 	FrameID json.RawMessage `json:"frame_id,omitempty"`
+	TypeID  json.RawMessage `json:"type_id,omitempty"`
 	Color   *string         `json:"color,omitempty"`
 	X       *float64        `json:"x,omitempty"`
 	Y       *float64        `json:"y,omitempty"`
@@ -173,7 +175,8 @@ func (h *handlers) createDevice(w http.ResponseWriter, r *http.Request) {
 		return
 	}
 	d, err := h.store.CreateDevice(pid, db.DeviceCreate{
-		Name: body.Name, FrameID: body.FrameID, Color: body.Color,
+		Name: body.Name, FrameID: body.FrameID, TypeID: body.TypeID,
+		Color: body.Color,
 		X: body.X, Y: body.Y, Width: body.Width, Height: body.Height,
 	})
 	if err != nil {
@@ -204,8 +207,13 @@ func (h *handlers) patchDevice(w http.ResponseWriter, r *http.Request) {
 		writeError(w, errors.Join(db.ErrInvalidInput, err), "frame_id must be an integer or null")
 		return
 	}
+	typeRef, err := parseFrameRef(body.TypeID)
+	if err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), "type_id must be an integer or null")
+		return
+	}
 	d, err := h.store.UpdateDevice(pid, id, db.DeviceUpdate{
-		Name: body.Name, FrameID: ref, Color: body.Color,
+		Name: body.Name, FrameID: ref, TypeID: typeRef, Color: body.Color,
 		X: body.X, Y: body.Y, Width: body.Width, Height: body.Height,
 	})
 	if err != nil {

internal/server/handlers.go

@@ -6,7 +6,7 @@ import (
 	"net/http"
 	"strconv"
 
-	"mgit.msbls.de/m/mcables/internal/db"
+	"mgit.msbls.de/m/cablegui/internal/db"
 )
 
 type handlers struct {
@@ -42,6 +42,8 @@ func writeError(w http.ResponseWriter, err error, details any) {
 		writeJSON(w, http.StatusBadRequest, errorBody{Error: err.Error(), Details: details})
 	case errors.Is(err, db.ErrInvalidInput):
 		writeJSON(w, http.StatusBadRequest, errorBody{Error: err.Error(), Details: details})
+	case errors.Is(err, db.ErrForbidden):
+		writeJSON(w, http.StatusForbidden, errorBody{Error: err.Error(), Details: details})
 	default:
 		writeJSON(w, http.StatusInternalServerError, errorBody{Error: err.Error(), Details: details})
 	}

internal/server/io_markers.go

@@ -0,0 +1,109 @@
+package server
+
+import (
+	"encoding/json"
+	"errors"
+	"net/http"
+
+	"mgit.msbls.de/m/cablegui/internal/db"
+)
+
+type ioMarkerCreate struct {
+	FrameID *int64  `json:"frame_id,omitempty"`
+	Label   string  `json:"label,omitempty"`
+	X       float64 `json:"x"`
+	Y       float64 `json:"y"`
+}
+
+// ioMarkerPatch mirrors devicePatch's frame_id tri-state — see
+// devicePatch + parseFrameRef in frames_devices.go for the wire format.
+type ioMarkerPatch struct {
+	Label   *string         `json:"label,omitempty"`
+	FrameID json.RawMessage `json:"frame_id,omitempty"`
+	X       *float64        `json:"x,omitempty"`
+	Y       *float64        `json:"y,omitempty"`
+}
+
+func (h *handlers) listIOMarkers(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	ms, err := h.store.ListIOMarkers(pid)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, ms)
+}
+
+func (h *handlers) createIOMarker(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	var body ioMarkerCreate
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	m, err := h.store.CreateIOMarker(pid, db.IOMarkerCreate{
+		FrameID: body.FrameID, Label: body.Label, X: body.X, Y: body.Y,
+	})
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusCreated, m)
+}
+
+func (h *handlers) patchIOMarker(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	var body ioMarkerPatch
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	ref, err := parseFrameRef(body.FrameID)
+	if err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), "frame_id must be an integer or null")
+		return
+	}
+	m, err := h.store.UpdateIOMarker(pid, id, db.IOMarkerUpdate{
+		Label: body.Label, FrameID: ref, X: body.X, Y: body.Y,
+	})
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, m)
+}
+
+func (h *handlers) deleteIOMarker(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	if err := h.store.DeleteIOMarker(pid, id); err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	w.WriteHeader(http.StatusNoContent)
+}

internal/server/ports.go

@@ -0,0 +1,114 @@
+package server
+
+import (
+	"encoding/json"
+	"errors"
+	"net/http"
+
+	"mgit.msbls.de/m/cablegui/internal/db"
+)
+
+type portCreate struct {
+	TypeID  int64   `json:"type_id"`
+	Label   string  `json:"label,omitempty"`
+	XOffset float64 `json:"x_offset"`
+	YOffset float64 `json:"y_offset"`
+}
+
+type portPatch struct {
+	TypeID  *int64   `json:"type_id,omitempty"`
+	Label   *string  `json:"label,omitempty"`
+	XOffset *float64 `json:"x_offset,omitempty"`
+	YOffset *float64 `json:"y_offset,omitempty"`
+}
+
+func (h *handlers) listPortsForDevice(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	ps, err := h.store.ListPortsForDevice(pid, id)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, ps)
+}
+
+func (h *handlers) createPort(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	var body portCreate
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	p, err := h.store.CreatePort(pid, id, db.PortCreate{
+		TypeID: body.TypeID, Label: body.Label,
+		XOffset: body.XOffset, YOffset: body.YOffset,
+	})
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusCreated, p)
+}
+
+func (h *handlers) patchPort(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	var body portPatch
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	p, err := h.store.UpdatePort(pid, id, db.PortUpdate{
+		TypeID: body.TypeID, Label: body.Label,
+		XOffset: body.XOffset, YOffset: body.YOffset,
+	})
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, p)
+}
+
+func (h *handlers) deletePort(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	if err := h.store.DeletePort(pid, id); err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	w.WriteHeader(http.StatusNoContent)
+}

internal/server/server.go

@@ -7,10 +7,10 @@ import (
 	"io/fs"
 	"net/http"
 
-	"mgit.msbls.de/m/mcables/internal/db"
+	"mgit.msbls.de/m/cablegui/internal/db"
 )
 
-// New returns an http.Handler serving the mCables API at /api/ and the
+// New returns an http.Handler serving the CableGUI API at /api/ and the
 // embedded frontend at /. The frontend FS should be rooted such that
 // "index.html" is at its root.
 func New(store *db.Store, frontend fs.FS) http.Handler {
@@ -45,6 +45,63 @@ func New(store *db.Store, frontend fs.FS) http.Handler {
 	mux.HandleFunc("PATCH /api/projects/{pid}/devices/{id}", h.patchDevice)
 	mux.HandleFunc("DELETE /api/projects/{pid}/devices/{id}", h.deleteDevice)
 
+	// IO markers (project-scoped) — wall-outlet terminators
+	mux.HandleFunc("GET /api/projects/{pid}/io-markers", h.listIOMarkers)
+	mux.HandleFunc("POST /api/projects/{pid}/io-markers", h.createIOMarker)
+	mux.HandleFunc("PATCH /api/projects/{pid}/io-markers/{id}", h.patchIOMarker)
+	mux.HandleFunc("DELETE /api/projects/{pid}/io-markers/{id}", h.deleteIOMarker)
+
+	// Ports — slice 7 lets m add/edit/remove instance ports on a device.
+	mux.HandleFunc("GET /api/projects/{pid}/devices/{id}/ports", h.listPortsForDevice)
+	mux.HandleFunc("POST /api/projects/{pid}/devices/{id}/ports", h.createPort)
+	mux.HandleFunc("PATCH /api/projects/{pid}/ports/{id}", h.patchPort)
+	mux.HandleFunc("DELETE /api/projects/{pid}/ports/{id}", h.deletePort)
+
+	// Device-type catalog. Built-ins are read-only; project-custom rows
+	// support full CRUD scoped to the project.
+	mux.HandleFunc("GET /api/device-types", h.listBuiltInDeviceTypes)
+	mux.HandleFunc("GET /api/projects/{pid}/device-types", h.listDeviceTypes)
+	mux.HandleFunc("POST /api/projects/{pid}/device-types", h.createDeviceType)
+	mux.HandleFunc("PATCH /api/projects/{pid}/device-types/{id}", h.patchDeviceType)
+	mux.HandleFunc("DELETE /api/projects/{pid}/device-types/{id}", h.deleteDeviceType)
+
+	// Connection requirements — the solver's per-project input.
+	mux.HandleFunc("GET /api/projects/{pid}/connection-requirements", h.listConnectionRequirements)
+	mux.HandleFunc("POST /api/projects/{pid}/connection-requirements", h.createConnectionRequirement)
+	mux.HandleFunc("PATCH /api/projects/{pid}/connection-requirements/{id}", h.patchConnectionRequirement)
+	mux.HandleFunc("DELETE /api/projects/{pid}/connection-requirements/{id}", h.deleteConnectionRequirement)
+
+	// Cables — slice 6: solver writes here with auto=1; slice 7 lets m
+	// hand-draw with auto=0. PATCH supports `promote: true` to flip auto→0.
+	mux.HandleFunc("GET /api/projects/{pid}/cables", h.listCables)
+	mux.HandleFunc("POST /api/projects/{pid}/cables", h.createCable)
+	mux.HandleFunc("PATCH /api/projects/{pid}/cables/{id}", h.patchCable)
+	mux.HandleFunc("DELETE /api/projects/{pid}/cables/{id}", h.deleteCable)
+
+	// Bundles — manual + auto.
+	mux.HandleFunc("GET /api/projects/{pid}/bundles", h.listBundles)
+	mux.HandleFunc("POST /api/projects/{pid}/bundles", h.createBundle)
+	mux.HandleFunc("PATCH /api/projects/{pid}/bundles/{id}", h.patchBundle)
+	mux.HandleFunc("DELETE /api/projects/{pid}/bundles/{id}", h.deleteBundle)
+
+	// Solver + quick-fix combo + setup templates.
+	mux.HandleFunc("POST /api/projects/{pid}/solve", h.solve)
+	mux.HandleFunc("POST /api/projects/{pid}/devices/{id}/ports-and-resolve", h.portsAndResolve)
+	mux.HandleFunc("GET /api/setup-templates", h.listSetupTemplates)
+	mux.HandleFunc("POST /api/projects/{pid}/apply-template", h.applyTemplate)
+
+	// Slice 8 — export to mxdrw.msbls.de
+	mux.HandleFunc("POST /api/projects/{pid}/sync/export", h.syncExport)
+
+	// v5 — clamps + cable routing.
+	mux.HandleFunc("GET /api/projects/{pid}/clamps", h.listClamps)
+	mux.HandleFunc("POST /api/projects/{pid}/clamps", h.createClamp)
+	mux.HandleFunc("PATCH /api/projects/{pid}/clamps/{id}", h.patchClamp)
+	mux.HandleFunc("DELETE /api/projects/{pid}/clamps/{id}", h.deleteClamp)
+	mux.HandleFunc("POST /api/projects/{pid}/cables/{cid}/clamps", h.attachClampToCable)
+	mux.HandleFunc("PUT /api/projects/{pid}/cables/{cid}/clamps", h.reorderCableClamps)
+	mux.HandleFunc("DELETE /api/projects/{pid}/cables/{cid}/clamps/{cmid}", h.detachClampFromCable)
+
 	// Frontend (embedded). Serve "/" → index.html via http.FileServerFS.
 	// Wrap in noCache so the browser revalidates with the ETag/Last-Modified
 	// the file server already emits — without this, browsers cache aggressively

internal/server/solver.go

@@ -0,0 +1,149 @@
+package server
+
+import (
+	"encoding/json"
+	"errors"
+	"net/http"
+
+	"mgit.msbls.de/m/cablegui/internal/db"
+)
+
+func (h *handlers) solve(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	preview := r.URL.Query().Get("preview") == "1"
+	res, err := h.store.Solve(pid, preview)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, res)
+}
+
+// ports-and-resolve combo: POST a new port to a device + re-run solve in
+// the same request. Used by the inspector quick-fix.
+type portsAndResolveBody struct {
+	TypeID  int64   `json:"type_id"`
+	Label   string  `json:"label,omitempty"`
+	XOffset float64 `json:"x_offset,omitempty"`
+	YOffset float64 `json:"y_offset,omitempty"`
+}
+
+func (h *handlers) portsAndResolve(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	id, ok := parseInt64Path(r, "id")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "id must be a positive integer")
+		return
+	}
+	var body portsAndResolveBody
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	res, err := h.store.PortsAndResolve(pid, id, body.TypeID, body.Label, body.XOffset, body.YOffset)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, res)
+}
+
+// -------------------------------------------------------- setup templates
+
+func (h *handlers) listSetupTemplates(w http.ResponseWriter, _ *http.Request) {
+	ts, err := h.store.ListSetupTemplates()
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+	writeJSON(w, http.StatusOK, ts)
+}
+
+type applyTemplateBody struct {
+	TemplateID    int64            `json:"template_id"`
+	NameOverrides map[string]string `json:"name_overrides,omitempty"`
+	SkipDevices   []int64          `json:"skip_devices,omitempty"`
+	OriginX       float64          `json:"origin_x,omitempty"`
+	OriginY       float64          `json:"origin_y,omitempty"`
+}
+
+func (h *handlers) applyTemplate(w http.ResponseWriter, r *http.Request) {
+	pid, ok := parseInt64Path(r, "pid")
+	if !ok {
+		writeError(w, db.ErrInvalidInput, "pid must be a positive integer")
+		return
+	}
+	var body applyTemplateBody
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeError(w, errors.Join(db.ErrInvalidInput, err), nil)
+		return
+	}
+	opts := db.ApplyTemplateOptions{
+		NameOverrides: map[int64]string{},
+		SkipDevices:   map[int64]bool{},
+		OriginX:       body.OriginX,
+		OriginY:       body.OriginY,
+	}
+	// JSON keys are strings; parse to int64.
+	for k, v := range body.NameOverrides {
+		var tid int64
+		_, _ = fmtSscan(k, &tid)
+		if tid > 0 {
+			opts.NameOverrides[tid] = v
+		}
+	}
+	for _, tid := range body.SkipDevices {
+		opts.SkipDevices[tid] = true
+	}
+	res, err := h.store.ApplyTemplate(pid, body.TemplateID, opts)
+	if err != nil {
+		writeError(w, err, nil)
+		return
+	}
+
+	// Auto-solve by default. ?solve=0 opts out for power users who want
+	// to inspect the seeded devices/requirements before the solver runs.
+	// This is THE fix for the v6 UX hole: m hit Apply, saw an empty
+	// canvas because nothing reloaded *and* nothing solved. With the
+	// frontend re-snapshotting after the POST returns and the response
+	// already carrying solver output, m sees the wired diagram in one click.
+	skipSolve := r.URL.Query().Get("solve") == "0"
+	combined := map[string]any{"template_apply": res}
+	if !skipSolve {
+		solveRes, err := h.store.Solve(pid, false)
+		if err != nil {
+			// Apply succeeded but Solve failed — don't 500 the whole
+			// call. Return template_apply with the solve error inline so
+			// the UI can recover (devices are there; m can re-solve).
+			combined["solve_error"] = err.Error()
+		} else {
+			combined["solve"] = solveRes
+		}
+	}
+	writeJSON(w, http.StatusOK, combined)
+}
+
+// fmtSscan parses a base-10 int from a string, returning (n, nil) on success.
+// Inline so handlers don't pull in strconv just for one call site.
+func fmtSscan(s string, out *int64) (int, error) {
+	var v int64
+	read := 0
+	for i := 0; i < len(s); i++ {
+		c := s[i]
+		if c < '0' || c > '9' {
+			break
+		}
+		v = v*10 + int64(c-'0')
+		read++
+	}
+	*out = v
+	return read, nil
+}

web/static/index.html

@@ -3,12 +3,12 @@
 <head>
   <meta charset="utf-8" />
   <meta name="viewport" content="width=device-width, initial-scale=1" />
-  <title>mCables</title>
+  <title>CableGUI</title>
   <link rel="stylesheet" href="/style.css" />
 </head>
 <body>
   <header class="topbar">
-    <span class="brand">mCables</span>
+    <span class="brand">CableGUI</span>
     <div class="project-picker">
       <label for="project-select" class="sr-only">Project</label>
       <select id="project-select" aria-label="Active project">
@@ -20,9 +20,15 @@
       </button>
     </div>
     <div class="topbar-spacer"></div>
-    <button type="button" id="btn-export" class="btn" disabled title="Slice 5">
-      Export
-    </button>
+    <button type="button" id="btn-apply-template" class="btn">Apply template…</button>
+    <button type="button" id="btn-solve" class="btn btn-primary">Solve</button>
+    <button type="button" id="btn-export" class="btn">Export</button>
+    <button type="button" id="btn-admin" class="btn" title="Admin: projects, cable types, device types, setup templates">⚙ Admin</button>
+    <span class="zoom-cluster">
+      <span id="zoom-pct" title="Zoom — scroll on canvas, or 0/Home to reset">100%</span>
+      <button type="button" id="btn-fit" class="btn btn-tiny" title="Fit content to view">Fit</button>
+    </span>
+    <span id="toast" class="toast" hidden></span>
   </header>
 
   <main class="layout">
@@ -30,25 +36,29 @@
       <section class="legend">
         <h2 class="sidebar-heading">Cable types</h2>
         <ul id="legend-list" class="legend-list"></ul>
-        <button type="button" id="btn-add-type" class="btn btn-tiny">+ Type</button>
       </section>
       <section class="tools">
         <h2 class="sidebar-heading">Tools</h2>
         <ul class="tool-list">
           <li><button type="button" id="tool-frame"  class="btn btn-tiny" data-tool="frame">+ Frame</button></li>
           <li><button type="button" id="tool-device" class="btn btn-tiny" data-tool="device">+ Device</button></li>
-          <li><button type="button" class="btn btn-tiny" disabled title="Slice 4">+ IO</button></li>
-          <li><button type="button" class="btn btn-tiny" disabled title="Slice 3">Draw cable</button></li>
+          <li><button type="button" id="tool-io"     class="btn btn-tiny" data-tool="io">+ IO</button></li>
+          <li><button type="button" id="tool-clamp"  class="btn btn-tiny" data-tool="clamp" title="Click canvas to drop a clamp. Cables can then route through it.">+ Clamp</button></li>
+          <li><button type="button" id="tool-req"    class="btn btn-tiny" data-tool="req">Drag req A→B</button></li>
+          <li><button type="button" id="tool-cable"  class="btn btn-tiny" data-tool="cable" title="Click a port to start, then click another port / device / IO marker">Draw cable</button></li>
         </ul>
       </section>
     </aside>
 
     <section class="canvas-wrap" aria-label="Diagram">
       <svg id="canvas" viewBox="0 0 2000 1500" preserveAspectRatio="xMidYMid meet">
+        <defs id="canvas-defs"></defs>
         <g id="canvas-frames"></g>
         <g id="canvas-devices"></g>
         <g id="canvas-ports"></g>
         <g id="canvas-cables"></g>
+        <g id="canvas-bundles"></g>
+        <g id="canvas-clamps"></g>
         <g id="canvas-io"></g>
       </svg>
       <p id="empty-hint" class="empty-hint">
@@ -113,6 +123,91 @@
     </form>
   </dialog>
 
+  <!-- New device (slice 4: type-aware) -->
+  <dialog id="modal-new-device" class="modal" aria-labelledby="nd-title">
+    <form method="dialog" id="form-new-device">
+      <h2 id="nd-title">New device</h2>
+      <label class="field">
+        <span>Type</span>
+        <select id="nd-type" name="type_id" required>
+          <option value="">Loading…</option>
+        </select>
+      </label>
+      <label class="field">
+        <span>Name</span>
+        <input type="text" name="name" id="nd-name" required autocomplete="off" />
+      </label>
+      <p class="form-error" id="nd-error" hidden></p>
+      <div class="actions">
+        <button type="submit" class="btn btn-primary">Create</button>
+        <button type="button" class="btn" data-close>Cancel</button>
+      </div>
+    </form>
+  </dialog>
+
+  <!-- New / Edit connection requirement (slice 5) -->
+  <dialog id="modal-requirement" class="modal" aria-labelledby="rq-title">
+    <form method="dialog" id="form-requirement">
+      <h2 id="rq-title">New requirement</h2>
+      <label class="field">
+        <span>From device</span>
+        <select id="rq-from" name="from_device_id" required></select>
+      </label>
+      <label class="field">
+        <span>To device</span>
+        <select id="rq-to" name="to_device_id" required></select>
+      </label>
+      <label class="field">
+        <span>Cable type</span>
+        <select id="rq-cable" name="preferred_cable_type_id">
+          <option value="">— solver picks —</option>
+        </select>
+      </label>
+      <label class="field" style="flex-direction: row; align-items: center; gap: 8px;">
+        <input type="checkbox" id="rq-must" name="must_connect" checked />
+        <span style="font-size: 13px; color: var(--text);">Must connect (solver hard-requires this link)</span>
+      </label>
+      <label class="field">
+        <span>Notes</span>
+        <textarea name="notes" rows="2"></textarea>
+      </label>
+      <p class="form-error" id="rq-error" hidden></p>
+      <div class="actions">
+        <button type="submit" class="btn btn-primary">Save</button>
+        <button type="button" class="btn" data-close>Cancel</button>
+      </div>
+    </form>
+  </dialog>
+
+  <!-- Solve preview-diff (slice 6) -->
+  <dialog id="modal-solve" class="modal modal-wide" aria-labelledby="sv-title">
+    <div style="padding: 16px;">
+      <h2 id="sv-title">Solve preview</h2>
+      <div id="sv-body" class="sv-body"></div>
+      <div class="actions" style="margin-top: 12px;">
+        <button type="button" class="btn btn-primary" id="sv-apply">Apply</button>
+        <button type="button" class="btn" data-close>Cancel</button>
+      </div>
+    </div>
+  </dialog>
+
+  <!-- Apply template (slice 6) -->
+  <dialog id="modal-template" class="modal modal-wide" aria-labelledby="tp-title">
+    <form method="dialog" id="form-template">
+      <h2 id="tp-title">Apply setup template</h2>
+      <label class="field">
+        <span>Template</span>
+        <select id="tp-select" required></select>
+      </label>
+      <div id="tp-preview" class="tp-preview"></div>
+      <p class="form-error" id="tp-error" hidden></p>
+      <div class="actions">
+        <button type="submit" class="btn btn-primary">Apply</button>
+        <button type="button" class="btn" data-close>Cancel</button>
+      </div>
+    </form>
+  </dialog>
+
   <!-- Delete Project confirm -->
   <dialog id="modal-delete-project" class="modal" aria-labelledby="dp-title">
     <form method="dialog" id="form-delete-project">
@@ -132,6 +227,24 @@
     </form>
   </dialog>
 
+  <!-- Admin: projects + cable types + device types + setup templates -->
+  <dialog id="modal-admin" class="modal modal-wide" aria-labelledby="adm-title">
+    <div class="admin-shell">
+      <header class="admin-header">
+        <h2 id="adm-title">Admin</h2>
+        <button type="button" class="btn btn-link admin-close" data-close>✕</button>
+      </header>
+      <nav class="admin-tabs" role="tablist">
+        <button type="button" class="admin-tab" data-admin-tab="projects" role="tab" aria-selected="true">Projects</button>
+        <button type="button" class="admin-tab" data-admin-tab="cable-types" role="tab">Cable types</button>
+        <button type="button" class="admin-tab" data-admin-tab="device-types" role="tab">Device types</button>
+        <button type="button" class="admin-tab" data-admin-tab="setup-templates" role="tab">Setup templates</button>
+        <button type="button" class="admin-tab" data-admin-tab="requirements" role="tab">Requirements</button>
+      </nav>
+      <section class="admin-body" id="admin-body" role="tabpanel"></section>
+    </div>
+  </dialog>
+
   <script type="module" src="/main.js"></script>
 </body>
 </html>

web/static/style.css

@@ -180,17 +180,43 @@ body {
   fill: var(--accent);
   font-size: 13px;
   font-weight: 600;
-  pointer-events: none;
+  cursor: grab;
 }
 
+/* Frame bottom-right resize affordance. Mirrors .device-resize-handle
+   but uses the accent-on-frame palette so it reads as part of the frame
+   chrome rather than the device. */
+.frame-resize-handle {
+  fill: rgba(0, 0, 0, 0.15);
+  stroke: rgba(0, 0, 0, 0.25);
+  stroke-width: 1;
+  cursor: nwse-resize;
+}
+.frame-resize-handle:hover {
+  fill: rgba(0, 0, 0, 0.3);
+}
+
+/* Stroke + fill come from the device's user-set colour, written as
+   inline style in renderCanvas — leaving them out of .device-rect so
+   the author CSS doesn't override the inline style. */
 .device-rect {
-  fill: #fff;
-  stroke: var(--text);
   stroke-width: 1.5;
 }
 .device-rect.selected { stroke-width: 3; }
 .device-rect:hover { filter: drop-shadow(0 1px 2px rgba(0, 0, 0, 0.15)); }
 
+/* Bottom-right resize affordance per device. Subtle grey by default,
+   stronger on hover so m can find it without it dominating the rect. */
+.device-resize-handle {
+  fill: rgba(120, 120, 120, 0.35);
+  stroke: rgba(60, 60, 60, 0.45);
+  stroke-width: 1;
+  cursor: nwse-resize;
+}
+.device-resize-handle:hover {
+  fill: rgba(60, 60, 60, 0.65);
+}
+
 .device-label {
   fill: var(--text);
   font-size: 12px;
@@ -211,7 +237,394 @@ body {
 .canvas-wrap.tool-frame  #canvas,
 .canvas-wrap.tool-frame  #canvas *,
 .canvas-wrap.tool-device #canvas,
-.canvas-wrap.tool-device #canvas * { cursor: crosshair !important; }
+.canvas-wrap.tool-device #canvas *,
+.canvas-wrap.tool-io     #canvas,
+.canvas-wrap.tool-io     #canvas *,
+.canvas-wrap.tool-clamp  #canvas,
+.canvas-wrap.tool-clamp  #canvas *,
+.canvas-wrap.tool-cable  #canvas,
+.canvas-wrap.tool-cable  #canvas * { cursor: crosshair !important; }
+
+/* Clamps — small grey rounded squares (v5 §11). Cables route through
+   them in `ord` sequence. */
+.clamp {
+  fill: rgba(120, 120, 120, 0.85);
+  stroke: rgba(40, 40, 40, 0.85);
+  stroke-width: 1.5;
+  cursor: grab;
+}
+.clamp.selected {
+  stroke-width: 3;
+  filter: drop-shadow(0 0 4px var(--accent));
+}
+.clamp-label {
+  fill: var(--text-muted);
+  font-size: 10px;
+  pointer-events: none;
+}
+/* Shared-segment count badge — m sees ×N next to clamps that route
+   ≥ 2 cables. */
+.clamp-badge {
+  fill: var(--text);
+  font-size: 10px;
+  font-weight: 700;
+  pointer-events: none;
+}
+/* Bundle overlay — thick striped polyline drawn on top of individual
+   cables along shared segments. v5 §11.3. */
+.bundle-line {
+  fill: none;
+  pointer-events: none;
+  opacity: 0.85;
+}
+
+.btn-link {
+  background: transparent;
+  border: 0;
+  color: var(--text-muted);
+  cursor: pointer;
+  font: inherit;
+  padding: 0 4px;
+  line-height: 1;
+}
+.btn-link:hover { color: var(--danger); }
+
+/* Highlight a port that's been picked as the cable-draw source. */
+.port-circle.cable-from {
+  stroke-width: 3;
+  filter: drop-shadow(0 0 4px var(--accent));
+}
+
+/* Zoom cluster — % + Fit button next to Admin. */
+.zoom-cluster {
+  display: inline-flex;
+  align-items: center;
+  gap: 6px;
+  margin-left: 8px;
+  padding-left: 12px;
+  border-left: 1px solid var(--border);
+}
+#zoom-pct {
+  font-size: 12px;
+  color: var(--text-muted);
+  min-width: 38px;
+  text-align: right;
+  font-variant-numeric: tabular-nums;
+}
+.canvas-wrap.panning #canvas,
+.canvas-wrap.panning #canvas * { cursor: grabbing !important; }
+.canvas-wrap.space-pan-ready #canvas,
+.canvas-wrap.space-pan-ready #canvas * { cursor: grab !important; }
+
+/* Header toast — slice 8 export feedback */
+.toast {
+  display: inline-block;
+  margin-left: 12px;
+  font-size: 13px;
+  padding: 4px 10px;
+  border-radius: var(--radius);
+  background: var(--surface-2);
+  color: var(--text);
+  max-width: 420px;
+  overflow: hidden;
+  text-overflow: ellipsis;
+  white-space: nowrap;
+}
+.toast.ok    { background: #e8f5e9; color: #1b5e20; }
+.toast.error { background: #fdecea; color: #911313; }
+.toast a { color: inherit; text-decoration: underline; }
+
+/* IO markers — diamonds. Power-by-convention, so the default fill is
+   the Power cable_type colour (#e03131). Rotated 45° rect is the
+   easiest way to draw a diamond that still hit-tests at the rotated
+   bounds (a <polygon> would also work; rect-with-rotate keeps the
+   same DOM shape as device/frame so the drag helpers reuse). */
+.io-marker {
+  fill: var(--danger);
+  fill-opacity: 0.18;
+  stroke: var(--danger);
+  stroke-width: 1.5;
+}
+.io-marker.selected,
+.io-marker:hover { stroke-width: 2.5; }
+.io-marker-label {
+  fill: var(--danger);
+  font-size: 11px;
+  font-weight: 600;
+  text-anchor: middle;
+  dominant-baseline: central;
+  pointer-events: none;
+  user-select: none;
+}
+
+/* Ports — small circles laid out along the device edge. Both fill and
+   stroke come from the cable_type the port carries (set inline in JS)
+   so the port reads clearly as a coloured anchor on the device. */
+.port-circle {
+  stroke-width: 2;
+  cursor: crosshair;
+}
+.port-circle.selected {
+  stroke-width: 3;
+  filter: drop-shadow(0 0 4px var(--accent));
+}
+
+.port-row {
+  display: grid;
+  grid-template-columns: 14px 1fr auto;
+  align-items: center;
+  gap: 6px;
+  font-size: 12px;
+  padding: 2px 4px;
+  border-radius: 4px;
+  cursor: pointer;
+}
+.port-row:hover { background: var(--surface-2); }
+.port-row .swatch,
+.swatch {
+  display: inline-block;
+  width: 10px;
+  height: 10px;
+  border-radius: 50%;
+  border: 1px solid rgba(0, 0, 0, 0.15);
+  margin-right: 6px;
+  vertical-align: middle;
+}
+.port-row .label { color: var(--text); }
+.port-row .conn  { color: var(--text-muted); font-size: 11px; }
+
+/* Requirements sidebar list */
+.requirement-list {
+  list-style: none;
+  padding: 0;
+  margin: 0 0 8px 0;
+  display: flex;
+  flex-direction: column;
+  gap: 2px;
+}
+.requirement-row {
+  display: grid;
+  grid-template-columns: 1fr auto;
+  align-items: center;
+  gap: 6px;
+  font-size: 12px;
+  padding: 3px 6px;
+  border-radius: var(--radius);
+  cursor: pointer;
+}
+.requirement-row:hover { background: var(--surface-2); }
+.requirement-row[aria-current="true"] {
+  background: var(--surface-2);
+  outline: 1px solid var(--accent);
+}
+.requirement-row .pair { color: var(--text); }
+.requirement-row .pair .type { color: var(--text-muted); font-size: 11px; }
+.requirement-row .badge {
+  font-size: 10px;
+  text-transform: uppercase;
+  letter-spacing: 0.04em;
+  padding: 2px 6px;
+  border-radius: 10px;
+  color: #fff;
+}
+.requirement-row .badge.must { background: var(--danger); }
+.requirement-row .badge.nice { background: var(--text-muted); }
+
+/* Tool-armed: drag-req tool cursor */
+.canvas-wrap.tool-req     #canvas,
+.canvas-wrap.tool-req     #canvas * { cursor: crosshair !important; }
+
+/* Drag-line preview while dragging from device A toward device B. */
+.req-drag-line {
+  stroke: var(--accent);
+  stroke-width: 2;
+  stroke-dasharray: 6 4;
+  fill: none;
+  pointer-events: none;
+}
+
+/* Cables on the canvas. Stroke colour comes from the cable_type;
+   solver-owned cables (auto=1) render with a slightly dashed pattern
+   so m can tell at a glance which the solver placed. */
+.cable-line {
+  fill: none;
+  stroke-width: 2;
+  cursor: pointer;
+}
+.cable-line.auto { stroke-dasharray: 8 3; }
+.cable-line:hover { stroke-width: 4; }
+.cable-line.selected { stroke-width: 4; }
+
+/* Endpoint handles — only rendered for the currently-selected cable.
+   Grab cursor on idle, grabbing while dragging (.replugging on root). */
+.cable-handle {
+  cursor: grab;
+  stroke-width: 2;
+  filter: drop-shadow(0 0 2px rgba(0, 0, 0, 0.35));
+}
+.cable-handle:hover { stroke-width: 3; }
+.canvas-wrap.replugging .cable-handle,
+.canvas-wrap.replugging #canvas * { cursor: grabbing !important; }
+
+/* Solve preview-diff modal */
+.modal-wide { width: 560px; }
+
+/* Admin modal — wider, tabbed */
+.modal-wide.admin-shell-host { width: 760px; }
+#modal-admin { width: 760px; max-width: 90vw; }
+.admin-shell { padding: 16px; min-height: 460px; }
+.admin-header {
+  display: flex;
+  align-items: center;
+  justify-content: space-between;
+  margin-bottom: 12px;
+}
+.admin-header h2 { margin: 0; }
+.admin-close { font-size: 16px; padding: 4px 8px; }
+.admin-tabs {
+  display: flex;
+  gap: 2px;
+  border-bottom: 1px solid var(--border);
+  margin-bottom: 12px;
+}
+.admin-tab {
+  background: transparent;
+  border: 0;
+  border-bottom: 2px solid transparent;
+  padding: 8px 12px;
+  font: inherit;
+  color: var(--text-muted);
+  cursor: pointer;
+}
+.admin-tab:hover { color: var(--text); }
+.admin-tab[aria-selected="true"] {
+  color: var(--text);
+  border-bottom-color: var(--accent);
+}
+.admin-body {
+  font-size: 13px;
+  max-height: 60vh;
+  overflow-y: auto;
+}
+.admin-row {
+  display: grid;
+  gap: 6px 12px;
+  padding: 8px 0;
+  border-bottom: 1px solid var(--border);
+}
+.admin-row:last-child { border-bottom: 0; }
+.admin-row .field { display: grid; grid-template-columns: 110px 1fr; align-items: center; }
+.admin-row .field span { color: var(--text-muted); font-size: 12px; }
+.admin-row .field input,
+.admin-row .field textarea,
+.admin-row .field select {
+  width: 100%;
+  font: inherit;
+  padding: 4px 6px;
+  border: 1px solid var(--border);
+  border-radius: 4px;
+  background: var(--bg);
+  color: var(--text);
+}
+.admin-row .actions { display: flex; gap: 6px; justify-content: flex-end; }
+.admin-row.locked { opacity: 0.85; }
+.admin-row .locked-badge {
+  display: inline-block;
+  font-size: 11px;
+  padding: 1px 6px;
+  border-radius: 3px;
+  background: var(--surface-2);
+  color: var(--text-muted);
+}
+.admin-row-title {
+  display: flex;
+  align-items: center;
+  justify-content: space-between;
+  font-weight: 600;
+  margin-bottom: 4px;
+}
+.admin-row-title .swatch { display: inline-block; }
+.admin-empty { color: var(--text-muted); padding: 16px 0; }
+.admin-add-row {
+  margin-top: 12px;
+  padding-top: 12px;
+  border-top: 1px solid var(--border);
+}
+.port-profile-list {
+  margin: 4px 0 0 0;
+  padding: 0;
+  list-style: none;
+  font-size: 12px;
+  color: var(--text-muted);
+}
+.port-profile-list li {
+  display: flex;
+  align-items: center;
+  gap: 6px;
+  padding: 2px 0;
+}
+.tmpl-detail {
+  margin: 4px 0 0 0;
+  font-size: 12px;
+  color: var(--text-muted);
+}
+.tmpl-detail ul { margin: 4px 0 0 16px; padding: 0; }
+
+.sv-body { font-size: 13px; }
+.sv-body h3 {
+  font-size: 11px;
+  text-transform: uppercase;
+  letter-spacing: 0.04em;
+  color: var(--text-muted);
+  margin: 12px 0 4px;
+}
+.sv-body ul {
+  list-style: none;
+  padding: 0;
+  margin: 0;
+  display: flex;
+  flex-direction: column;
+  gap: 2px;
+}
+.sv-body li {
+  padding: 4px 8px;
+  border-radius: var(--radius);
+  background: var(--surface-2);
+}
+.sv-body li.added   { border-left: 3px solid #2f9e44; }
+.sv-body li.removed { border-left: 3px solid var(--danger); text-decoration: line-through; }
+.sv-body li.unmet   { border-left: 3px solid #f59f00; }
+.sv-body li.unmet .quickfix {
+  display: inline-block;
+  margin-left: 8px;
+  font-size: 11px;
+  padding: 1px 6px;
+  background: var(--accent);
+  color: #fff;
+  border-radius: 10px;
+  cursor: pointer;
+}
+
+.tp-preview {
+  font-size: 13px;
+  background: var(--surface-2);
+  border-radius: var(--radius);
+  padding: 8px 12px;
+  margin: 8px 0;
+}
+.tp-preview h4 {
+  font-size: 11px;
+  text-transform: uppercase;
+  letter-spacing: 0.04em;
+  color: var(--text-muted);
+  margin: 6px 0 4px;
+}
+.tp-preview ul { list-style: none; padding: 0; margin: 0; }
+.tp-preview li { padding: 2px 0; }
+.tp-preview .skip {
+  margin-right: 6px;
+  font-size: 11px;
+}
 
 .rubber-band {
   fill: rgba(25, 113, 194, 0.08);

web/web.go

@@ -1,5 +1,5 @@
 // Package web bundles the frontend (HTML/JS/CSS) into the Go binary
-// via embed.FS so deploying mCables means shipping one file.
+// via embed.FS so deploying CableGUI means shipping one file.
 package web
 
 import (